Huben GK1 - Trigger adjustment

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 33

  • @Ariztid
    @Ariztid 10 місяців тому +2

    Mine came scary light. Thanks for this.

  • @wes1spence
    @wes1spence Рік тому

    After watching your vid I set my trigger weight to 2 lbs. now it’s the same weight of my competition bullseye pistol. Thanks for the info!!!!

  • @Colorado303Adventures
    @Colorado303Adventures Рік тому +1

    Im so happy you exist! Im so happy this was made!!

  • @carllarkylark
    @carllarkylark 7 місяців тому +1

    Thanks Gregor. Will this same trigger adjustment also apply to the Huben K1?

    • @gregorkamensek3923
      @gregorkamensek3923  7 місяців тому

      Yes, it does but only for newer versions of K1 that have those screws. Also, K1 has first stage length and weight set (fix) at the front of the trigger, so these adjustment will effect what you would call 2nd stage (in reality, K1 has what you could call 3 stages, second and third is what you adjust with those screws).

  • @olivier2211
    @olivier2211 Рік тому +1

    Wonderful explanation. Thanks a lot.

  • @mikepi660
    @mikepi660 Рік тому +1

    Thank you ,,, I learned how too,, From the factory, OMG just barely touch trigger and she goes off,, I have to adj mine as came with a hair trigger,, Thanks for the info and how too,,,

  • @airgunsrubenvarela2526
    @airgunsrubenvarela2526 Рік тому +1

    Como siempre, Excelente explicación!!!

  • @gravediggerrc
    @gravediggerrc 6 місяців тому

    HELLO GREGOR DO HAVE VIDEO ON HOW TO ON JAM SLUGS IN HUBEN GK1

    • @gregorkamensek3923
      @gregorkamensek3923  6 місяців тому

      No, not yet. I really don't have problems with that but it is true that by now I have tons of experiences and I know what not to do... There are several videos on UA-cam on how to fix jams on K1 and GK1 though....

  • @Harolddespui
    @Harolddespui Рік тому +1

    Gregor, i have a question i cannot find an answer of in the forums. Is .253 slugsize big enough to make it fit snug in the magazine or do we need .254 for that?
    With my K1, .253 does not fit snug yet and the slug might fall into the barrel while filling the magazine. I wonder if that is the case too with the GK1.

    • @gregorkamensek3923
      @gregorkamensek3923  Рік тому +1

      Huben started to use magazine with grooves in their .25 cal recently (don't know exactly when). Older magazines have holes with 6,46 mm diameter but it is not optimal to use such big slugs. The grooves are about 6,37 mm so anything slightly bigger than that will be snug in the magazine. I still have some more testing to do but from what I have seen so far, the best size for newer Huben .25 cals (K1 as well as GK1) is between .251 and .252.

  • @HumbleTrav76
    @HumbleTrav76 Рік тому +1

    Great video thanks.

  • @McCoggueriisskyyss
    @McCoggueriisskyyss 3 місяці тому

    Can you do K1 trigger adjustments?

    • @gregorkamensek3923
      @gregorkamensek3923  3 місяці тому +1

      It is completely the same as on GK1... You only have additional for the first stage length on the blade of the trigger.

  • @faysal2995
    @faysal2995 Рік тому

    Very useful, as always. Thanks. Hope to see a disassembly video soon 😊

  • @justinhromek73
    @justinhromek73 Рік тому +1

    Very helpful!

  • @Kliman7
    @Kliman7 Рік тому

    Thank you! I received my gk1 v3 yesterday
    Is it possible to let the velocity be adjusted to a minimum with the gun over a long period without damaging the velocity adjustment piston?

    • @gregorkamensek3923
      @gregorkamensek3923  Рік тому

      Of course. You can leave it at any position. Just make sure you only screw in the adjustment screw only until it goes smoothly, don't tighten it when it stops...

  • @heathhalfhill6401
    @heathhalfhill6401 Рік тому

    Will this pistol in the near future come regulated?

    • @gregorkamensek3923
      @gregorkamensek3923  Рік тому

      I don't know if Huben will produce it but I suspect that 3rd party option to fit a regulator will be available as some point.

  • @robertbeltowski2819
    @robertbeltowski2819 Рік тому

    Geat video ........Gregor, my suppressor is on order.

  • @caseymurazik
    @caseymurazik Рік тому

    💖 "Promosm"