how to replaced crankcase vent valve on BMW X5

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • I’m showing how to change the crankcase vent valve on 2005 BMW X5 4.4L.
    my vehicle would have a rough idle at cold start the rpm would fluctuate. so i suspected the cvv and i popped open the cover and took a look and find out that the diaphragm was broken so i order one to replaced. so if u have a x5 that has a rough idle at cold start check ur ccv it possible that the diaphragm its broken and needs to be replaced. have fun .

КОМЕНТАРІ • 16

  • @ozandarik6757
    @ozandarik6757 3 роки тому +1

    2011 x5 n63 5.0 engine iş same crank case valve? And if it’s broken is make smoke from the exhaust?

    • @mraatmm
      @mraatmm  3 роки тому

      I don't know if it's same but it can smoke if diaphragm is broken.

    • @ozandarik6757
      @ozandarik6757 3 роки тому

      @@mraatmm my car is not same crank I have totally different but same sheet problem:) I will fix tomorrow

  • @KennethBostonian
    @KennethBostonian 3 роки тому

    I’m having a hard time purchasing the cap with the male end. There’s a tube that has to connect to it. That tube plays a very important role in pressure regulation. It’s there to connect to the cap.

    • @mraatmm
      @mraatmm  3 роки тому

      Is your vehicle X5 2005. Cause on some vehicle you have to change the whole valve cover. Plus the cap I'm using it's a female end.

    • @KennethBostonian
      @KennethBostonian 3 роки тому +1

      @@mraatmm, I have a 08 x5 sport.

  • @taylorsons4303
    @taylorsons4303 2 роки тому

    They also have one behind the motor as well.

    • @mraatmm
      @mraatmm  2 роки тому

      I don't think on this model.

  • @Praudas
    @Praudas 5 років тому

    Helped me a lot. Thanks. This causes strange whistling noise yes?

    • @mraatmm
      @mraatmm  5 років тому

      Praudas glad it helped, personally I haven’t heard it whistle but it’s possible for t to whistle I guess.

    • @Praudas
      @Praudas 5 років тому

      @@mraatmm I have 3.0i engine, I have changed whole valve cover with gaskets and problem gone.

    • @mraatmm
      @mraatmm  5 років тому +1

      Praudas on some other models like inline 6 to change the ccv u need to change the whole valve cover. The ccv it’s built inside it. Don’t no the year or model but it’s a inline 6. It’s a hard n expensive repair. But on my x5 it’s easy To change n cheap.

    • @dflex4180
      @dflex4180 3 роки тому +1

      @@mraatmm yes correct but still dont have to change the whole valve cover. You can cut the top off ccv valve cap and use silicone to secure new valve cap.

    • @dflex4180
      @dflex4180 3 роки тому

      @@Praudas yes but you could of just changed CC valve for less than $20 buy cutting cover off and replacing with new one instead of whole valve cover.

  • @soarsplizz6412
    @soarsplizz6412 2 роки тому

    I’ve been to your house with masa and mariam