The steering can become vague and you can often hear knocking. Turn the tiller fully left or right, hold the wheel that is pointing inwards at the front. With the other hand, grab hold of the track arm and give it a wiggle. It’s connected by ball joints so it’ll twist but should have no up, down or sideways movement.
Omg can’t believe what I’m watching for a Tga engineer came out to this they won’t touch it on site it needs to go the factory because you’re going off your eyesight not bang on with Tga and you have is problem someone from irsal has to come to the uk to do this work and lazers are used etc it not a easy job replacing the rod
It’s a 8mph scooter. It’s not going to get a speed wobble, start tramlining or scrub out the tyres in a few weeks. If someone is that concerned about it, most tyre bays have laser wheel alignment kit. I very much doubt someone comes from Afikim in Isreal to do wheel alignment on a scooter that doesn’t need it.
@@iknwiknw7808 having paid to have it done tells me you don’t know what you’re on about. Signed off by who? For who? Who is the almighty mobility scooter authority?
I love replacing bearings.. It's so... nice feeling.
Very much.
I used to carry spares on my motorbike, because the fronts don’t last long on pan European. 15 min roadside job.
May I ask if these are the same bearings for the 4 spoke breeze s4 front wheel please
where did you get the trk rod ends please
how do you know when the track rod ends need replacing
The steering can become vague and you can often hear knocking.
Turn the tiller fully left or right, hold the wheel that is pointing inwards at the front.
With the other hand, grab hold of the track arm and give it a wiggle.
It’s connected by ball joints so it’ll twist but should have no up, down or sideways movement.
@@Bramble43 thank you ill try that
@@Bramble43 slight movement up an down, on one side there another joint rod going to the steering ,that move up an down with a noise
what size bearing you use please ?
got it. lol going deaf and blind. need to get me bearings.
Omg can’t believe what I’m watching for a Tga engineer came out to this they won’t touch it on site it needs to go the factory because you’re going off your eyesight not bang on with Tga and you have is problem someone from irsal has to come to the uk to do this work and lazers are used etc it not a easy job replacing the rod
It’s a 8mph scooter.
It’s not going to get a speed wobble, start tramlining or scrub out the tyres in a few weeks.
If someone is that concerned about it, most tyre bays have laser wheel alignment kit.
I very much doubt someone comes from Afikim in Isreal to do wheel alignment on a scooter that doesn’t need it.
@@Bramble43 I’ve had mine done twice by Tga so I know what I’m talking about plus the work you have done isn’t singed off safe to be used
@@iknwiknw7808 having paid to have it done tells me you don’t know what you’re on about.
Signed off by who? For who?
Who is the almighty mobility scooter authority?
the audio on this is absolutely crap and the video isn't that good