Making an Axe Handle
Вставка
- Опубліковано 4 лют 2017
- For a written tutorial check out my blog at wilkerdos.com/2017/02/make-axe...
Patreon: goo.gl/4tTz8J
Instagram: / wilker_dos
Videos I watched before this project:
Jimmy Diresta: goo.gl/khZFWX
An Axe to Grind: goo.gl/ukG212
Wranglerstar Part 1: goo.gl/R9CMOL
Wranglerstar Part 2: goo.gl/m1uxkh
Check out my awesome sponsor Triton Tools!: www.tritontools.com/en-US
Things I Used in This Project:
Folding Outfeed Table: bit.ly/2pyfIbv
Bandsaw: goo.gl/tPx55P
Spindle Sander: goo.gl/jAnnrT
SuperJaws: goo.gl/5yUGRc
Belt Sander: goo.gl/HDbw6d
Boiled Linseed Oil: goo.gl/hiGkDH - Навчання та стиль
I always appreciate when makers show their mistakes, we can all learn from them. Thanks April
F.A.I.L. = First Attempt In Learning. Nice job, April.
Someone once told me "If you hit the bullseye every time, your target is too near." It is admirable how you tackle new and interesting challenges. Your skill and ingenuity is very impressive. Keep up the great work!
I have a clock hanging in my shop. Had a grand plan of making a dual time zone clock, but out of a solid piece of red oak. Cut the circle, drilled the center for the works, and went to slice a layer off the face using a bandsaw with a 12 inch throat. Problem was that the clock was 14" in diameter. After some hacking around and trying to 'make do' without any of the proper tools, I stained it, wrote "TAKE YOUR TIME" across the face in big block letters, and hung it in the shop. Failure is a wonderful teacher.
I've been a carpenter for 25 years and haven't even attempted half the things you do. Good work!
Great job April. You asked about mistakes. I made one with boiled linseed oil. Almost burnt my house down. Linseed oil soaked rags can spontaneously combust. I read the warnings on the label and meant to dispose of properly, but I got sidetracked and forgot about it. I'll never make that mistake again!
new to woodworking and first time i started using oil didn't know it would catch on fire during the drying process of the rags. thank goodness after watching some staining techniques someone mentioned it catching on fire and looked it up and realized i should probably take out the bunched up rag out of my garbage that was soaked with it. lol thank goodness i learned without burning down my house.
just stumbled upon your site - we all make mistakes. I have been woodworking for almost 50 years and my old teacher used to say "the man that never made a mistake never made anything" great job - I have a box with axe heads - you have inspired this 50+ year old to actually make a handle Thankyou!
I DID'NT SEE ANY MISTAKES,, I SAW AN EXPERIENCE THAT YOU NOW HAVE YOUR OWN KNOWLEDGE ON,, LOVED IT, YER AWESOME FOR TRYING THIS ,, IT IS VERY REWARDING TO USE YOUR OWN TOOLS,, WELL DONE..
I tried my hand at Ana White's dollhouse bookcase for my 4 year old. It being only my 4th project ever (and first time using a jigsaw) I was not very pleased with it at all. But she loved it and asked me to finish it. I didn't correct it. I liked that she loves it as is, because her daddy built something for her for all the books she loves. Also, it's nice to know someone as talented as yourself, still makes mistakes once in a while. I feel more human and more encouraged to keep giving his craft a chance.
*this craft
love it! i think it's awesome that you didn't edit out the mistake, instead reminded us that we are ALL human...
This is one of the reasons I and so many, are such fan's of your's. You take making a mistake and turn it around into a learning experience. You could have just left it as it was, but even after the hours of hard work sanding that handle, you decided to try again. And that my dear, is one of the many reasons why we are such fans. You've taught me and I'm sure others, not to get mad, but turn it around and learn from what was done wrong. Thanks for another great video April, you rock!
~Dolly
As I started falling trees in forestry I once pinched my powersaw, than pinched my back up saw directly above it and while I was chopping them out came a heavy rain storm ; ) the tree fall in the end, I was soaking wet and finished the job a other day. Sharing failure's is such a great thing to grow! Thanks you for this great video and all the best from Germany, Maximilian.
Nice work! If you're still looking for a sign or engraving on the old handle: "Failure. You CAN "handle" it!"
Hi April, Great to see you get a handle on things :-)
Truth of the matter is, if you never make a mistake, you are not doing anything. I applaud you for showing your failure, but then the persistence to remake it correct. Bravo!
Came out good in the end! This fall I made three workbenches with a drop wheel mechanism. when I went to start putting the sides to the stretchers I realized that I'd made all the sides identical instead of mirrors.. got to rebuild half of them. Just part of the process!
Once you have the axe hung and wedged, soak the entire head, eye, and handle in the linseed oil, for a day or two. The wood (in the eye)will continue to absorb the oil, and once saturated, will crystallize and keep the head tight on the axe for much much longer. I try to soak the entire axe when I re-hang any of mine.
Oh neat, I didn't read or hear about that advice when researching it. I'll do it.
yep. I do that with hammers, as well. It might not be a "splitting" axe, but an axe is useful for many things outside its specific design niche, Like ZOMBIES!
Well at least you proved there is more than one way to skin an ax handle! Great ax swinging technique, a ten on style points.
April, I give you a ton of credit for admitting the mistake. You could have scrapped the video along with the handle and remade everything, and we would have never known, but your integrity clearly shows here. You're talented and a good soul. I've made more mistakes in my 25 yrs of wood working to list here, but they taught me what I know today. You've accomplished so much in such a short amount of time and you should be proud. Love your channel and looking forward to your future projects!
That's one thing I love about your videos. You show your mistakes and how you fix them.
Hi April,
Nice job. You always have a great attitude, even when things fail. Just another learning experience. Like the brief glimpses of the T-Rex when you growl. :-)
; ) Hehe I was laughing when I did that.
Great work!! For some reason every shit head is and expert on axes!!! ...Make a video and they all come out frm woods... You're awesome!!! Xo!!
We should axe them why they all act that way. Who's with me?
Thanks so much Jimmy, you are awesome. : )
Jimmy, if there might be one day a hall of fame for DIY your are my first choice.
Step. ONE
TALK LESS!!
Step. TWO
JUST GET a MAN to Do IT!!!!!!!!!!!!!!
@@5tonyvvvv Eh?
From a guy who is dyslexic; the work looked nice to me. I was all into the video and then you on'ed up to the mistake. See that is just why I watch your vids and have subscribed to your channel. You are a hard worker and not afraid to show your opps. You are honest and still awesome!
I was re-finishing a table for a client earlier this year. We ultimately decided that General Finishes Arm-R-Seal in the semi gloss would be the best choice for the new finish. It was a rather large table. I went through about half of the can building up the finish on the table. I was on my last coat, and I went to do my last passes to level out the finish, but I did not realize I accidentally grabbed the wrong rag, which was covered in sawdust. Instead of doing the smart thing and letting it dry, then sanding out the dust nibs, I tried to "pick" them out, which in turn, pulled up previous layers of finish, and thus ruined everything I did. I then had to strip all that finish off the table for a second time, and build up my coats again. By the time I had fixed my mistake, I think I used almost an entire can of Arm-R-Seal. Great work April! That axe turned out very nicely!
I own an allotment (a small rented plot of land for growing food on). Last year I spent the whole year failing to maintain it and the only edible things I produced was a bucket of potatoes and tomatoes. The rest was either full of dandelions, nettles or 6 foot high thorn bushes. However I now know many things not to do this year... Which I assume means I've now plenty of chance to make different mistakes ;-)
It's all a part of learnin' how.... It's all a part of growin' up... Two sayings that a couple of people that were a huge part of my life would say from time to time. Thanks for the video, April.
April, thanks especially for adding the videos you watched as inspiration. Such a great way to get into the groove!
I built a tv stand out of 150 year old Cyprus, I made it using through mortis and tenons for the top and bottom shelf. Mind you the only wood I had was enough for the stand. I cut the tenons wrong so in order to save it I cut it shorter. The client had a specific use for the size of it and refused to pay me ( I don't blame him) so I had to eat 300 dollars worth of wood and 3 days of shop time. Hahahahaha lesson learned for me! You are doing great, love the videos and all you do!
well little miss i am 64 with a life time of mistakes . mistakes mean you at least tried . good thing is you get to try again . just don't give up.
The only failure, is to not try. Also rawr! :D
Great video, April! :)
Great work April. Hanging a axe is very hard let alone making the handle. Your hanging method was spot on. I have several rasps that I do a lot of the shaping work with. One other thing that most people miss when buying or making a handle is you want the grain in the handle to be oriented the same way as the axe head. If the grain is going across the head or even a little bit diagonal the handle is much more likely to snap. Again, great work. It is almost a art. Im still learning.
I really appreciate your honesty and ability to laugh at yourself. The extras at the end were a nice touch.
lot of people chopping away at your axe handle making abilities. it came out great more!!! Much better than I and most people could do
love the shirt. Pink Floyd will always be my favourite band.
P'S spending a whole day turning a 12" natural edge oak bowl and getting a catch causing it to shatter only because I was tyred.
Simon Hopkins if you ever get a chance come to stl mo and see El Monstero. They have a summer show. And four or five Christmas shows. They are the best Pink Floyd cover band.
Took my kid to see Brit Floyd a year or two back. I thought they were pretty dagum awesome!
April - I have made so many mistakes that there wouldn't be room here to list them all! One of the things that keeps me building, however, is seeing those who I learn from making mistakes and sharing those mistakes with me. Thank you so much. You, Linn from Darbin Orvar, Jay Bates and my sweet neighbor Mr. Connoly who passed away last summer, are the people who gave me the confidence to get started and keep trying! How cool is it that I've never met you but have learned so much from you? Thanks for putting your self out here for us!
Lots of patience making that handle. Loved the look on your face when you realized you put it on backward. Years ago when my son was young and needed a new bed, we purchased a captain's bed that required assembly. Being a man, I chose to ignore the instructions that came with the bed. A couple of hours later, I thought I was finished and had a piece left over. Figuring that it had a purpose and wasn't just there for packaging, I decided to consult the instructions. That piece was intrigal to the stability of the bed and was step 2 in the assembly process. Had to take it all apart and start over. Needless to say, I've followed instructions to the letter in future projects.
We have an acronym we use on the job: STAR
S: Stop
T: Think
A: Act
R: Review
Anytime we reach a point where a mistake would be irreversible, we try to take a moment and think clearly about what our next steps will be and we get some kind of verification that we're making the correct move. The idea, of course, is to minimize or eliminate mistakes, but acronyms like that didn't just pop up because people are so great at doing things correctly all of the time.
jesusnthedaisychain what's funny is that the R in your list became youtube's "Read more" link
Sounds very "corporate".
Are you going to make a sheath for it?
I just screwed up a sledge hammer handle hang. Put the roughly round handle in at an off angle from the center line. I gorilla glue my handles in so when you screw up, it’s a mess.
I typically make the wedges out of treated lumber to last a little longer than poplar. The gorilla glue does a good job of keeping water out of the handle head, and filling in small gaps. My current technique with a box plane, my hand grinder, and sanding machines is a far departure from my first handle replacement nearly 50 years ago. I had broken a splitting maul handle (I broke a lot of stuff when I was young) and I ask my grandfather how to fix it. He gave me a rough handle and a piece of broken coke bottle glass. It took me all weekend to finish it. Love to watch your channel.
Oooooo ooooo! I'm good at this! I built a new race motor. Small block Chevrolet. After getting the block and rotating assembly back from the machine shop I started putting it together. Got the motor built and put it on my break in stand and fired it up. It ran for about 20 seconds and locked up. Wouldn't budge! Tore it down and found a ton of bits of sludge in the oil pickup, oil pan and bearings. The machine shop didn't wash it after machining and I didn't think about it. Luckily the only thing that was hurt was the bearings. I re polished the $3000 crank shaft and spent another $300 on bearings building one set of bearings to make everything right. Could have been a lot more expensive I guess. Awesome job April! We never stop learning in life and mistakes just make us better.
Thanks for the honesty, could of edited mistakes out. Cool vid! take it easy :)
I messed up pretty bad one time... I made a fretboard in rosewood all by hand to a ukulele then when I was done with it I realized that the frets was at the wrong measurements. So one weeks work ruined because i forgot to dubble check the measurements.
Greetings from Sweden
Hanging it backwards actually gave me an idea to make my own for work. Being a fireman we usually don't keep an edge so end up using the flathead part to do most of the striking. Thank you!
When roughing out wood shapes like curved handles I found that a flap disc on an angle grinder used carefully works well. Love your videos and the mistakes which you overcome.
love the way we get to see the "how-not-tos" as well :-))))
My motto is measure twice, cut twice and start over, that means I'm not making mistakes, right?
Nice swing! I love when people show their mistakes, everyone should embrace them since they teach yourself and others so much. And somehow finishing after starting over feels more statisfying.
Making any kind of handle is really not just a paint-by-numbers kinda deal. Alot of visualizing and custom sculpting . You did awesome!
April, I had no doubt that you could "Handle" it. Great vid as always!! Keep shining! ;)
; ) Thanks
Its no Chainsaw Chicken, but it is pretty damned kewl !!!
If you never make a mistake, you've never tried. I love that you're willing to show us your mistakes so we can learn with a little less pain. I learned to 'Hang' axe heads way back in the seventies. I've never used glue on the wedge... I fit the handle using a scraper or piece of broken glass. The smooth surface seems to help friction hold the head on... Of course, I could be fooling myself... Not having a bandsaw, I do a lot of shaping with the draw knife and spoke shave.
Good job, especially the second one! Suggestion: file off the burrs on the flat face (opposite the blade). That way you can avoid them breaking off and turning into missiles at some inopportune time. Dad (an opthalmologist) took a lot of those chips out of injured eyes.
The story you asked for: Dad and friend Hank were at the beach house, installing a fluorescent lamp on a screened porch. Drilling a hole with a spade bit to feed the wiring through, they had trouble - the bit would heat up and smoke but would not cut through the ceiling material. Two trips to the hardware store to get replacement bits, only to discover that the drill was in reverse.
That's why I loved the Red Green Show.
I made a mistake once and I had to find a new girlfriend and do it all over again!
I made that same mistake with a wife.
Don't worry we all do mistakes, I did one in 1993 :D (I wish that was true)
yes i remember mine...lol... kidding..........i made my share
more than once in my framing days, I put a wall together and had the wrong size door/window hole, or it was in the wrong spot and had to redo it. what I like the best about your channel is your willingness to jump into something you've never done before. and your good attitude through all the bumps and bruises along the way. (that you let us see, anyway!) ;) Keep up the good work!
Wranglerstar is the man to watch for anything for cutting wood, or if you want to tackle anything without any power tools.
Failure is always an option...
Wranglerstar has some amazing videos on making some axe handles
His videos are linked in the description.
Having an old neighbor and their willingness to share the wisdom they've accumulated is a pretty amazing thing.
Great job. I keep a lot of my failures. a lot the time they are great conversation pieces and they remind me how far i have come.
You still amazed me, if that is your worst mistake, hurry go buy a lottery ticket, you are golden
You need a spokeshave!
We only learn from failure. Never feel bad about making mistakes in the shop. It's part of the craft, and you are honing it. Thank you for putting yourself out there so we can learn with you. You are an inspiration.
well done. Hanging the slow tedious way is far and away the best way. For very modest occasional use, you might get by the quick way but under even the most heavy use, the way you did it the second time will keep that head in place for years. Great job!
aprilosaurus
rawr ; )
Nice job April, I always enjoy your videos. Many years ago I made a queen anne style tea table out of cherry and carved the cabriole legs mostly using a spoke shave. It was the most satisfying project I've ever completed. I've got an old axe that needs a new handle so I may give it a try.
Applause for including the error. I think it's the biggest thing people need to learn about all skills. Screwing it up is part of the process.
I was always told "practice makes prefect the final piece" by a master carpenter as well as experimental lab machinist. The former being my father and the later being my grandfather. So seeing you practicing was enjoyable. You finished the handle like a veteran woodworker.
There is no right or wrong, just different techniques - I have hung 100's of axes and make my own handles, some have been simple, many average and the occasional one an absolute nightmare.
Nothing in nature is perfect, and neither are we so it makes sense that we rarely absolutely nail a project without a hiccup or two.
You possess many great qualities, honestly, persistence and integrity to name a few - It's those assets that build great things.
Well done.
Awesome video April, as usual. Failure is a part of life, any life worth living anyway... I failed significantly on my first job as a computer programmer and had to spend an entire week cleaning up my mess. Great thing was the boss saw how I took the responsibility for my mistake, made things right, and actually gave me a raise afterwards.
Nice touch adding the T-rex and the extras. Totally cracked up watching your face in the extras! :)
Im a big fan of WS! Glad you found his videos on axe hanging!
I subscribe to too many pages already, but anybody that can admit and SHOW a mistake, DESERVES a new subscriber. That's how a real craftsman (I hope you aren't the type to be offended by craftsman.) becomes better at his/her trade. A craftsman is always learning new thing building off their experience, knowledge, and skills.
I couldn't sleep tonight, so I found myself watching UA-cam videos. This is the very first video of yours that I watched many months ago. I've been a fan of yours ever since. Keep up the great work April!
Very impressive...I like how you share the mistakes and how you overcame for great results!
April it happens more than we want to admit, it go's back to the old measure twice and cut once kinda thing. the first time a made an ax handle I under estimated what an art it is from picking the right stock to hanging it is all very important. I finished my first handle, burned it, hung it, put lots of oil on it, just to have the handle snap off at the cheeks on the first try (: and to make it more embarrassing I had my entire family out to admire my whole days work. Even now after making and hanging lot of axes I always take my time, I would say I spend as much time hanging the ax as it take to make the entire handle. I love your videos and thanks for sharing your mistakes so other can learn from them Matt
Though I've not made from scratch I have found an angle grinder and a flap wheel makes short work of shaping and fitting the head on the handle. I actually do the "hanging" upside down compared to how you did it. comes out the same though. Also in a store bought kit you get a metal wedge that you pond into the wood wedge. The wood wedge pushes the handle to the sides while the metal pushes the the nandle into the front and back or toward the bit and butt.
Hi April, to qote my late Dad 'the person who never made a mistake never made anything'. There's another quote - 'anyone can make a mistake, it takes a lady to admit it'. Thanks for sharing, and to get your other viewers rolling in the aisle, I've never seen an axe head being hung, so thanks for that as well! Bob.
I've been doing handles for both sharp and blunted (for fighting) axes for about 10 yrs now. In the start it was all machinery-machinery-machinery, and more often than not I got the grain wrong... Lotsa broken handles!
I've now taken to using the bandsaw to start with and then a drawknife, to really get as feel for the grain, and watching for any irregularities in the handle BEFORE hanging it... No more one-shot handles!
Great job. Recently I built my wife a can shelf. Just a basic shelf she can stack cans on. I had majority of the 2x4's cut to the length I needed. When I realized I needed a couple more cross braces. Well apparently I had not payed attention to the fact that I set down one of the precut legs with the rest of the wood. Well after I had cut my cross bracing and it was time to assemble I realized my rookie mistake. I had used my precut leg to cut cross bracing.
Hope you don't mind me asking April. What do you have in your ears? Hearing protection, music or an aid?
Nice done April!
Hey April! What a coincidence! I started a year and a half ago refurbishing old hammer heads and making new handles for them. And just last week when making hammer #11 for my uncle I hung the handle the wrong way...at least that I intended initially. It was a cool mistake...because it gave it a "tomahawk" look that seems to look better!
I'll tell you what, I give you credit for starting over completely. I made a replacement handle for a small hewing axe several months ago and it was a complete pain in the a$$. Like stated, it takes a long time and A LOT of patience fitting the head until it fits.
I've done several handles for axes, hatchets and mauls. I always use a draw knife and a spoke shave, I usually gut the stock to rough size on the table saw and then go at it from there with hand tools. The secret is they need to be hair popping sharp when using them, they require a lot less work to use them that way. Nice work on the handle.
Lack of success is not failure. Failure is when you give up. As long as you keep trying you will not fail. You may not always succeed, but you will not fail. Great work.
I did a clutch on a Nissan Frontier which is a 10 hour job ( I worked at a Nissan dealer and it was my first one.). I made the mistake of clocking the flywheel wrong. Yes it got replaced as well. Didn't figure it out till it was all back together. Had to take the whole thing back apart and pretty much redo the whole job. Never made that mistake again. As long as you learn from your mistakes, they are not mistakes. They are lessons.
ok April, here's my story. Working on remodeling our guest bathroom, I wanted some nice trim on the outside and an attached framed mirror on the inside of the bathroom door. I also wanted to use the cheap hollow core door already in the house to save some money. Spent half a day making sure my measurements, cutting, placing, painting the trim (decorative floral design) and finally gluing everything in place. Wasn't until I hung the door that I realized I glued everything upside down (big boxes of six panel at the top and the mirror kept hitting the toilet when you opened the door, small bathroom). i ended up having to buy a new door, trim and mirror to do the whole process again. So a misdirection axe handle isn't so bad :) Finally my grandma taught me the old adage "we learn more from our mistakes than our successes."
your videos are so great april.. just authentic and smooth.. very nice job on this one.
I have learned more from what I have screwed up than anything I have done right. Keep up the good work April. You are awesome.
I like that you are willing to show that not everything goes as planned the first time
Thank you April, i have a axe head , ok its a kindling axe but it still needs a new handle. You have given me some ideas on making my own.
I saw the head was upside down and my heart sank! All that work. But the most impressive thing about this video is that you started over and didn't try to re use it. Impressive.
Just a big umnichka! !! !!
It's nice to see good works that are professionally performed ....
Thank you !
Great video April. Just to make you fell better, I "carefully" measured a cabinet opening for 4 drawers.. confident in my measurement, I batched out pieces for all 4...missed it by 3/16...lol. Keep swing that axe. Can't wait to see the new house
Loved this show April. It was interesting from start to finish. Including the fail and bloopers at the end. I'd give you five stars is stupid UA-cam hadn't stopped that feature a few years back.
everyone makes mistakes, thats how we learn & even find better ways to do things, you're a true inspiration to me, I sort of gave up working with wood, & miss it greatly, so glad you are sharing your knowledge & abilities with me. thanks , wishing you the best.Tom
Great video, I like that you show your mistakes, we all make them, makes us all better in the long run, I have screwed up on probably every project I've ever done in one way or another, maybe small, sometimes large mistakes, far too many to list. Watched the "axe to grind" video, can you imagine building a log cabin with just different axes?!?! That's insane! It would take forever!!!
people who said they don't make mistakes haven't done anything yet so keep on trucking and smiling because that one beautiful smile xxxx
This is just a suggestion, do not cut the end of the handle flush with the head, leave about a 1/4 inch and then submerge it in water for 24 hours (just the head end) this causes the wood to swell in a mushroom shape and thus assures you that the head of the ax will never come loose, then allow it to dry and do the rest of the steps needed to preserved the wood, i know that what you had done is probably enough for what you are going to do with it but just wanted to write something lol, I also admire the quality of work that you do all the time, thanks for doing this types of videos and keep up the good work.
Wish they grew them like you up here!!! Great job, thanks for sharing this
That's hilarious. I definitely had my own struggles with hanging axe heads, but backwards and upside down, that's rough. Glad you bit the bullet and started over, but it would have been fun to keep that one for posterity. Good work!