New fender after market $150 Buy it self it is cheaper but Let’s add labor to remove and replace Trim out time to paint the rear and rust prevention Then de trim the door labor We call that r&I time Prep the door for blend so the color matches Masking and paint time to paint both panels Allot more materials An easy 1500 to 1800 Instead a quick rust repair is an hour A little filler and primer keeping the repair small enough to fix and paint the one part ..no parts cost Painted fixed out the door in two days… $500 and done right it will last !
@@VerticalHysteria What inside? It's a single sheet front fender. He cut out the affected area and welded to the clean steal. The inside is now the back side of the patch he welded in. Are you trying to say if he dropped a whole strut , for internal room , cut a fender out , made a steel patch and welded it in yet he wouldn't have thrown primer and possibly some colour on the inside? He would have had to grind down the stone guard or paint on the inside or it would have melted, set on fire and contaminated the weld. Theirs no way he would've gone to this much effort and not spent the legitimate 30 seconds flicking the inside with the primer and paint when he did the rest of the fender lol.
This is a man who takes great pride in doing his work properly and professionally and took the time snd put in the effort to learn the job properly - EXCELLENT . ❤
nice work my friend, I'm a 30 year collision guy, what people fail to realize the time to remove and replace another fender, blending into adjacent panels and color match, this way he can blend the color and stay on the panel, faster cheaper and will last just long enough
Habe auch, mitunter im Karosseriebau gelernt. Und es ist nach wie vor eine, wenn nicht die schönste Arbeit im Kfz - Bereich. Eben nicht nur stupides Teile aus und einbauen. Ich habe auch schon andere Videos von dir gesehen (Levella). Machst wirklich nen super Job. Nur stellt sich bei solchen Arbeiten wie hier, halt auch immer die Frage, des Kosten - Nutzenaufwands. Leider werden solche Arbeiten heutzutage, in vielen Bereichen immer unwirtschaftlicher, wenn man die Arbeitszeit gegen ein Neuteil gegenrechnet, kommt dieses unterm Strich oftmals günstiger. Im Oldtimer- Bereich sieht es dann schon wieder anders aus. Aber nichtsdestotrotz, wer dieses Handwerk richtig beherrscht (so wie du), der ist ein wahrer Künstler 👍.
Die Geschichte ist ganz einfach, gibt man so etwas in Auftrag, ist es einfach nicht wirtschaftlich bei einem günstigen Schraubteil so zu reparieren, macht man die Arbeit selbst wo der Faktor Zeit keine Rolle spielt kann man das so machen.
I really hate how everyone thinks they are good at bodywork! I hate how egoistic people are, and selfish! Cant we just apreciate this guy job? Well done sir! Coming from a fellow bodyman👍
@@ciprianpopa1503 ¿? I was merely commenting (blessings) to bodymen, in general. (Nothing else). (I know from experience how difficult this profession is [to make a living from]). If you're a bodyman, God[Bible] Bless you.
Die Schallschluckgummis = sollte man den VW Vorständen alle zu Essen geben. Diese Reparatur haben wir schon öfter erledigt, mit sauberer Sprühdosen Lackierung, pro Seite 200 - 230 € > Das mit dem Gebrauchten? Der ist zu 90% der gleiche Müll und Nachbauflügel, Passform, Lackierkosten, Umbau > meist über 10 Jahre alt > zu teuer😢
Bei Teile die es aktuell noch einige neu Gibt aktueller Preis pro Kotflügel 120€ lackiert eher quatsch aber wenn man ein Älteres Fahrzeug hat wo es kaum noch Teile gibt Mega geil, top das einige noch sowas machen :)
He finished it and ground the welds and looks even like new, most guys just weld some blobs and put a bucket of body filler on the heat wrapped panels calling their self "professionals".
It would be cheaper, less time consuming, and a better fix, just replacing the fender. The only advantage to this is in the paint, keeping putty and primer to a small area, and blending color within the fender area.
.. das geht flotter wenn man ein grob vorgearbeitetes blech (ohne klebeband !) Anpunktet & AM FAHRZEUG mit zange ,hammer & feingefühl fertig bearbeitet ..
I have the same though not as extensive rust issue with my 2009 VW Rabbit (aka Golf) on both front fenders. Looks like a design flaw where road dirt and salt collects. Good repair job with pride in his work where most now just take the easy route.
Simple to replace...but harder to repair, well done 👏
Не всегда, бывает что подогнать новое кривое крыло куда сложнее чем просто сделать кусочек
Cheaper too never seen a golf 5 fender be more than 50-60€
@@omeririk00golf 5 fender comes repaired too or scratched
And for what that is costing, you could just buy a new fender
with the same defect.
Maybe but then you still need to pay to have it painted, the old one removed and the freshly painted one put on.
New fender after market $150
Buy it self it is cheaper but
Let’s add labor to remove and replace
Trim out time to paint the rear and rust prevention
Then de trim the door labor
We call that r&I time
Prep the door for blend so the color matches
Masking and paint time to paint both panels
Allot more materials
An easy 1500 to 1800
Instead a quick rust repair is an hour
A little filler and primer keeping the repair small enough to fix and paint the one part ..no parts cost
Painted fixed out the door in two days… $500 and done right it will last !
For 100 bucks and shipping another 100 bucks. This is 10 dollars. Just some labour.
oui mais des fois sur les vieilles voitures il ni en a plus, voitures dit de collection
That repair was done very well. You can't even see your weld. Beautiful work.
$20 says he didn't grind and proper the inside... only this time it'll rust faster 😂
@@VerticalHysteriaI did. Give me 20 bucks
Место сварки обработано лужением и отшлифовано.
@@VerticalHysteria What inside? It's a single sheet front fender. He cut out the affected area and welded to the clean steal. The inside is now the back side of the patch he welded in.
Are you trying to say if he dropped a whole strut , for internal room , cut a fender out , made a steel patch and welded it in yet he wouldn't have thrown primer and possibly some colour on the inside?
He would have had to grind down the stone guard or paint on the inside or it would have melted, set on fire and contaminated the weld.
Theirs no way he would've gone to this much effort and not spent the legitimate 30 seconds flicking the inside with the primer and paint when he did the rest of the fender lol.
I agree, beautiful work, but too labor intensive, replace the fender.
Warum der Aufwand? Einfach einen anderen Kotflügel vom Schrottplatz dran und fertig!
Weil man es kann und was drauf hat und sich viel Geld spart!
@@VentoVr61987 Geld sparen? So ein Bullshido...
Bei der Karre ja
Es gibt aber auch eher selten gebaute Autos für die wenig zu finden ist
@@sirhenrypatschislewsky5248 jo, das stimmt schon...
Ich hätte das Klebeband dran gelassen, Lack drüber fertig😂
Amazing work. Love to see talented people like this.
In america, it's cheaper to just replace the fender.
And you can now get them painted to match, for right around 100 bucks.
If you didn't have replacements?
This repair method is as obsolete are turning rotors, cheaper to replace with new than repair
@@freezehands ... Donor cars.
This is a man who takes great pride in doing his work properly and professionally and took the time snd put in the effort to learn the job properly - EXCELLENT .
❤
nice work my friend, I'm a 30 year collision guy, what people fail to realize the time to remove and replace another fender, blending into adjacent panels and color match, this way he can blend the color and stay on the panel, faster cheaper and will last just long enough
Habe auch, mitunter im Karosseriebau gelernt. Und es ist nach wie vor eine, wenn nicht die schönste Arbeit im Kfz - Bereich.
Eben nicht nur stupides Teile aus und einbauen.
Ich habe auch schon andere Videos von dir gesehen (Levella). Machst wirklich nen super Job.
Nur stellt sich bei solchen Arbeiten wie hier, halt auch immer die Frage, des Kosten - Nutzenaufwands.
Leider werden solche Arbeiten heutzutage, in vielen Bereichen immer unwirtschaftlicher, wenn man die Arbeitszeit gegen ein Neuteil gegenrechnet, kommt dieses unterm Strich oftmals günstiger.
Im Oldtimer- Bereich sieht es dann schon wieder anders aus.
Aber nichtsdestotrotz, wer dieses Handwerk richtig beherrscht (so wie du), der ist ein wahrer Künstler 👍.
Die Geschichte ist ganz einfach, gibt man so etwas in Auftrag, ist es einfach nicht wirtschaftlich bei einem günstigen Schraubteil so zu reparieren, macht man die Arbeit selbst wo der Faktor Zeit keine Rolle spielt kann man das so machen.
Golf 5 Ersatz Kotflügel lackiert in Wagenfarbe vor 2 Jahren 125 € pro Kotflügel.
Крыло дешевле поменять
Не на всех машинах это можно сделать. Что там крыло. Ты мне свечи найди на Nissan Dayz Roox. Просто свечи!!! 😂😂😂
@@TheEmpire2222 в данной машине все можно поменять
인건비가 더 싸면 판금이 더 낫죠.
또는 부품이 생산이 안되거나
@@TheEmpire2222 Купи ОКУ и не ипи сепе мозги
😂😂😂@@YSTIM642😂😂😂
I really hate how everyone thinks they are good at bodywork! I hate how egoistic people are, and selfish! Cant we just apreciate this guy job?
Well done sir! Coming from a fellow bodyman👍
👍👍👍
God[Bible] Bless you. (My dad was a body & fender man, worked on US & imports. Miss him dearly. Hope to see you again soon, dad).
@@tonyd1149 god bless the egoistic people/
@@ciprianpopa1503 ¿? I was merely commenting (blessings) to bodymen, in general. (Nothing else). (I know from experience how difficult this profession is [to make a living from]). If you're a bodyman, God[Bible] Bless you.
Дело мастера боится 😱 сразу видно откуда руки растут 👍💪✊так держать 👍 респект 🤝
Откуда?)))
@@Ram-1988Groznij с дупла белки🤣
@@user-sg8qw2rp1x походу
Бл,переднее крыло проще купить
Я тоже считаю проще и дешевле купить, а если повезёт, ещё и в цвет
Bei mein Vw t4 2.4 Diesel , jetzt 30 Jahre alt auch alle hinter mir. Es lohnt ❤
بعض الأمور يمكن إصلاحها دون أن ينخفض سعر السيارة إذا كان الشخص محترف في إصلاح السيارة
I knew this was a golf just by seeing the rot. I've got a mk4 that had the exact same issues.
Die Schallschluckgummis = sollte man den VW Vorständen alle zu Essen geben.
Diese Reparatur haben wir schon öfter erledigt, mit sauberer Sprühdosen Lackierung, pro Seite 200 - 230 € > Das mit dem Gebrauchten? Der ist zu 90% der gleiche Müll und Nachbauflügel, Passform, Lackierkosten, Umbau > meist über 10 Jahre alt > zu teuer😢
Just get a 2nd hand wing from a scrapyard.
Надо было по скотчу покрасить и продать😂
Единственный русский ответ и прям в точку 😂
Tak to je fachman, pan klempir!!❤❤ klobouk dolu pane❤
На видео красиво конечно,но самом деле мало таких честных!!
Лепит потом втюхивает
Bei Teile die es aktuell noch einige neu Gibt aktueller Preis pro Kotflügel 120€ lackiert eher quatsch aber wenn man ein Älteres Fahrzeug hat wo es kaum noch Teile gibt
Mega geil, top das einige noch sowas machen :)
Das ist sehr sehr schön!❤
Aber, wenn machst du für kunde gegen stundenlohn, unrentabel.
Woah, what? You just jumped over that whole stitch and grind step.
Du kannst dein Handwerk noch ! 👍👏
Bei uns in Italien jede macht das und lohnt sich fast immer
He finished it and ground the welds and looks even like new, most guys just weld some blobs and put a bucket of body filler on the heat wrapped panels calling their self "professionals".
Es gibt also doch noch Leute die oldschool können und nicht nur Teileweitwurf. Nice 👍
He does great work . Very talented 👍
mit den dreckigen Fingern übers papier reiben ist die beste variante um anzuzeichnen...
Man been working all kinds of technical jobs and still haven’t been able to work with cars looks like a great job
Troca o paralamas... O cliente agradece!
Belo trabalho!
It would be cheaper, less time consuming, and a better fix, just replacing the fender. The only advantage to this is in the paint, keeping putty and primer to a small area, and blending color within the fender area.
Thank you for your demonstration
🫡🫡♥️
New fender job done
Уефщвд❤🎉😢😮😮😅уущу
Sehr schön ausgeführt! 👍
Die Pelikanschere ist ein wichtiges Werkzeug in diesem Bereich 😎
That’s perfectionism! I love it!
Just get a new fender
Looks good. I would like to know how you formed the ridge curve
Das ist Handwerk, ganz toll!🎉❤
Nice repair 😊 , everybody is too quick nowadays to just throw away and replace .
That’s some really good rust repair
Good to see repairs,,, sometimes it’s not easy to source a new wing etc ..
То что мертво, умереть не может.
Всем работягам привет 👋
98% del video pegando la cinta y en el ultimo segundo el trabajo semi terminado, un genio de la edicion
А просто новое крыло купить?
Finde erstmal in den USA einen guten !
Besser als neu oder gebraucht hält länger und sehr günstig top arbeit
Neuer Flügel kostet 40-50€ plus lackieren 100€, gewechselt in 15min.... damit ist noch nicht mal die Arbeit bezahlt 😂
This is a bad job )))
100€ für Lackierung??? Junge, in welchem Jahrtausend bist Du denn hängen geblieben 😂😂😂
In Holland, we buy a whole new panel in aluminium. But good job.
All that work to replace a $80 golf fender.
А кромку загнул внутрь ?
a replacement fender would have been the correct repair.
Сразу видн что человек занят любимым делом мастер с золотыми руками🤝👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Saubere Arbeit.
Wo ist dein Werkstatt?
Super💪Aber gehen da nicht zwei Bleche zusammen, also auch das vom Radhaus?
Ein heiler Kotflügel vom Schrottplatz ist billiger
Important skill to have if a fender is no longer available. Masterwork 👌
Идеальный мастер
Чисто немецкий сервис с турецким радио внутри 😁
Ich dachte schon jetzt kommt so ein DIY aus Amerika mit Glasfasermatten Bauschaum und Spachtelmasse (in rauen Mengen versteht sich)
Aber das tat gut ❤
Great job looks fantastic 👏
Zuerst habe ich gedacht, dass das Priora ist...
.. das geht flotter wenn man ein grob vorgearbeitetes blech (ohne klebeband !) Anpunktet & AM FAHRZEUG mit zange ,hammer & feingefühl fertig bearbeitet ..
Du hast recht
Super tolles video
Schön dass das wer macht. Ist da der Falz unten dran?
Ja klar
대단한 기술 입니다.
훤다 원상복귀 감쪽같이 새차가
되었네요 .😂😂😂
That repair is definitely more than the cost of a replacement panel , must be a personal car
Metal working is a skill I wish I had.
Helal ustam.
Sağolsun kardeşim
Una reparación con fibra de vidrio sería duradera ?
Qual cor essa do carro , amigo?
Was kostet ein gebrauchter Kotfluegel vs Arbeitsstunde ?
Ansonsten sehr gut Wie er den Rost bearbeitet hat
Я тоже так делал, на москвиче, на шестёрке, на тойоте. 😅
Sauber Respekt
Да!
Хорошо что на моей машине крылья пластиковые))
Теперь я знаю куда применить куски проф листа от забора
BRAVO MAJSTORE
Arkada mabel matiz mi caliyor? Telif yememek icin sesi degistirmisler ama yine de anlasiliyor hafiften.
Ve simge de çalıyo şu aşkın olayım varya
Buen trabajo🇪🇦👍❗
Great work. Skills shown.
Come home son to help me!😊
Yussuf nebenan lackiert gleich nach dem tapen😂
Kadir Abi,du bist eine Maschine.🚘🏁👌Vay Vay Vay
Bizde böyle uğraşan usta varmıdır?
excellent workmanship buddy!
Turkish background music 😊
Щас бы в 2024 на переднем крыле арку реставрировать и переваривать, когда на разборке деталь стоит копейки
и не поспоришь😂😂😂
зашпаклевать с газетои и все два года отедиш и выбросиш всю машину я так делаю😂😂
Problem ist bei dem Kotflügel, der Gammel kommt von Innen - wenn die Naht in der Ablaufkante nicht gut ist, da sammelt sich Dreck und Wasser...
Sehr schön
Bisschen Kotflügel am Rost?😂
Ja, so habe ich es früher auch gelernt.
Great video nice job🙂👍
🙋♂️🙋♂️ Thank you
У некоторых людей руки растут из нужного места 👍🏼
Маэстро вы лучший!
На шроте полно таких крыльев, даже в цвет 😊
дороже пркупать
Что за шрот?
@@user-li2fk8hv9m нрезнаю
@@user-li2fk8hv9m это разборка, дерево.
Why not install a better fender
Beautiful work
I have the same though not as extensive rust issue with my 2009 VW Rabbit (aka Golf) on both front fenders. Looks like a design flaw where road dirt and salt collects.
Good repair job with pride in his work where most now just take the easy route.
Very nicely done!
Das nennt man Zeitwert gerechte Reparatur 👍