After 15 minutes of trying to find the right position for my pieces of cardboard, it finally worked. Hopefully it will stay like this for a while without causing any trouble.
Thanks for the tip! Just did this to mine. Only thing I did differently was I put a nut right behind where the screw goes in, then reinstalled the screw. I'll let you know how long if/when the gas gage goes back to inverted. Hopefully lasts a long time. 🤞
@sanchezsantiago14 No, it lasted about a week before the lights started going out again. I ended up buying one of the refurbished ones off eBay and it works great. With the refurbs, you can see where they did repairs at each of the pins where the LEDs are and honestly, they did a great job. I'd def recommend one if you decide to go that route. 👍
You're literally a genius, thank you!
If you know how to solder you can re solder the terminal in the back of the board
Thank you. My gauge is now working. Fingers crossed!!
After 15 minutes of trying to find the right position for my pieces of cardboard, it finally worked. Hopefully it will stay like this for a while without causing any trouble.
Going to give it a try. Thanks so much
You should have use the padding for chair legs. But ya bro thinks for the video it helped a lot never thought of checking that
Thanks for the tip! Just did this to mine. Only thing I did differently was I put a nut right behind where the screw goes in, then reinstalled the screw. I'll let you know how long if/when the gas gage goes back to inverted. Hopefully lasts a long time. 🤞
No problem, keep me updated!
Did this hold up?
@sanchezsantiago14 No, it lasted about a week before the lights started going out again. I ended up buying one of the refurbished ones off eBay and it works great. With the refurbs, you can see where they did repairs at each of the pins where the LEDs are and honestly, they did a great job. I'd def recommend one if you decide to go that route. 👍
@@raginasian4720 awesome I appreciate the feedback
@@sanchezsantiago14 Happy to help
What about temp gauge, and 2 digital notches on both sides 2 from cold off 2 from hot off?. Any guessed
Hi Brian, so we can open the plastic thing without open all the dashboard from the bottom ?
Lifesaver bro
Can you remove the whole speedo while only removing that trim piece?
A FULL CARDBOARD BOX = FULL GA$ TANK ???
Lmao! Yes!
What a HACK