Since we're going into Atmos there is no better value for monitors! They come with brackets and can be installed anywhere easily. You can use a distribution amplifier rather for 4 ohms with independent volume control per pair and build a real 7.1 rig good enough for pro mixing in a home studio on a budget!! Insane little boxes!
Not directly : Those are passive speakers, they have to be connected to an amplifier or AV receiver (the same things with many bells and whistles). Once connected, if that receiver is Bluetooth, then your phone will carry a signal to the receiver, which will convert it back to analogue and distribute it to the system. Hope that answers your question:)
Ok I am just amazed that people know what the light bulb inside is for. I am a engineer and this response sounds reasonable although I have never seen it before.
@@josephharrell5724 Community started using it thirty years ago in their 4x15 box the drivers were all 2 ohms , that was when I first saw ict , as they called it being used ,,, induction coupled technology , from memory.
I played these speakers on my Denon PMA 915R (2x80w) and they started smelling like something is burning, anyone can help me what I did wrong, they don't sound like they used to
Sorry to contradict previous reviews but these really are the worst speakers money can buy. Components are of very low quality. The woofer has a foam suspension which desintegrates while you're looking at it!! I have TWO pair of them. After a few years the foam simply PULVERIZES. It happened to all 4 speakers! They may sound OK the first few months but then the desintegration process becomes audible. The woofer doesn't perform anymore as it should and finally the diaphragm simply separates from the suspension. Apart from that, the tweeter is a joke. I think they got it from a toy factory. The piece of dampening material inside the box is a laugh. Then you have the cross-over filter. It is the simplest of the simplest high / low pass filter you can imagine. Here also, everything is done to cut costs. The speakers are made in China but it is the worst quality China has to offer.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Since we're going into Atmos there is no better value for monitors! They come with brackets and can be installed anywhere easily. You can use a distribution amplifier rather for 4 ohms with independent volume control per pair and build a real 7.1 rig good enough for pro mixing in a home studio on a budget!! Insane little boxes!
this is a very good quality speaker .i m use this for 20 more years since the jbl still using orange colors label..the sound will make u guys happy
JBL ❤️🥰🔥
high copy ??no?
Can you put rubber surround on this model?
Jeez both sides of the PCB say "CONTOL 1". Is this unit genuine?
Some Chinese engineer that can't say r
Nice vid.. very clear and I enjoyed the music.. subscribed.
Could it be that they even sound better without the grilles?
Thanks for the vid.
Can I use this speakers with Audient Evo 4 or MTrack Solo?
Can i use it on 100v line
No
do you know how to change the sk3? does it need soldering?
Yes the bulb does need soldering. You can find one on Amazon for about $7.
I m going to use Four Pairs of mini hall. Can any one suggests me, how much watts of Amplifier i must use for this?
is the Nobsound NS-20G good for these speakers?
Ewan.Music NO,Nein
@@chicagomen01 why not?
It should do the job but an old stereo receiver like a Sony or Aiwa would probably be better for these
Make one clip for control 3 pro,plz
it's hard to find
One question..can i connect these speakers via bluetooth
Not directly : Those are passive speakers, they have to be connected to an amplifier or AV receiver (the same things with many bells and whistles). Once connected, if that receiver is Bluetooth, then your phone will carry a signal to the receiver, which will convert it back to analogue and distribute it to the system. Hope that answers your question:)
@@jas_bataille thankyou..
do you know why there is a (what looks lke) lightbuld inside?
Type of overload fuse for tweeter.
Ok I am just amazed that people know what the light bulb inside is for. I am a engineer and this response sounds reasonable although I have never seen it before.
Protection lamp.
@@josephharrell5724 Community started using it thirty years ago in their 4x15 box the drivers were all 2 ohms , that was when I first saw ict , as they called it being used ,,, induction coupled technology , from memory.
I played these speakers on my Denon PMA 915R (2x80w) and they started smelling like something is burning, anyone can help me what I did wrong, they don't sound like they used to
Estos son a 4 Ohms, y tú Denon tendrá salida de 8 Ohms, si fuera a la inversa no hay problema aunque tenga menos entrega de volumen
Agora monte de novo.
Can i use these without amplifiers on my computer or television or Amplifier is required to use these please reply.
Sorry to contradict previous reviews but these really are the worst speakers money can buy. Components are of very low quality. The woofer has a foam suspension which desintegrates while you're looking at it!!
I have TWO pair of them. After a few years the foam simply PULVERIZES. It happened to all 4 speakers!
They may sound OK the first few months but then the desintegration process becomes audible. The woofer doesn't perform anymore as it should and finally the diaphragm simply separates from the suspension.
Apart from that, the tweeter is a joke. I think they got it from a toy factory.
The piece of dampening material inside the box is a laugh.
Then you have the cross-over filter. It is the simplest of the simplest high / low pass filter you can imagine. Here also, everything is done to cut costs.
The speakers are made in China but it is the worst quality China has to offer.
cop urun paranıza yazık