Chevrolet Sonic - Replace Front Wheel Bearing and Lower Ball Joint
Вставка
- Опубліковано 5 лип 2024
- Warning
Do this at your own risk
I will not be held liable for anyone/anything
I am replacing the front wheel bearings and the lower ball joints on my 2013 Chevy Sonic.
Don’t forget to inspect the knuckle.
Parts (Double Check for Yourself)
Wheel Bearing - GM 13592067, ACDelco FW395 (Do not cheap out)
Axle Nut - GM 13208672
Brake Caliper Bracket Bolt - GM 11516330
Wheel Hub (Optional) - GM 13588470
Snap Ring (Optional) - GM 13268964
ABS Speed Sensor (Optional) - GM 94544449 (LEFT), GM 94544448 (RIGHT)
Lower Ball Joint (Optional) - GM 95907943, ACDelco 45D1524, Moog K500317 (recommended)
Brake Pad (Optional) - GM 42570931, ACDelco 171-1216
Brake Rotor (Optional) - GM 23118274, ACDelco 177-1053
Table of Contents
Intro/Warning/Parts and Tools Needed: (00:00)
Step 1 Identify the Bad Bearing/s: (00:57)
Step 2 Lift Up Car and Take Off Wheel: (05:06)
Step 3 Unscrew Axle Nut: (07:29)
Step 4 Remove Brakes: (08:21)
Step 5 Remove Brake Dust Shield and ABS Speed Senor: (12:26)
Step 6 Remove Wheel Hub: (14:39)
Step 7 Remove Knuckle: (19:52)
Step 8 Remove Wheel Bearing and Snap Ring: (23:06)
Step 9 Install New Bearing, Hub, and Snap Ring: (25:22)
Step 10 Inspect Joints: (28:32)
Step 10 Continued Replace Lower Ball Joint: (28:41)
Step 11 Attach Knuckle: (31:41)
Step 12 Reinstall Brake Dust Shield and ABS Speed Senor: (35:05)
Step 13 Install Brakes: (35:55)
Step 14 Install NEW Axle Nut: (38:06)
Step 15 Put the Wheel on and Lower the Car: (38:57)
Step 16 Test the Braking System: (40:17)
Step 17 (Optional): (41:15)
Step 18 Get an Alignment Done: (41:19)
Step 19 Road Test: (41:24) - Авто та транспорт
Awesome video. Just did this on my daughters 2014 sonic LT. Very detailed. Thank you so much.
I love the punch the rivet into a socket trick you've got dude. Stealing that!
Really appreciate your attention to details. THANK YOU!
Your video is really helpful! However I wish you could lighten it up a bit next time. You’re a great instructor!!!
You looked very competent.
Hey young man good job some times when you don’t have all the tools you have to make your own, I have a 2013 LT 5 Doors, with 90,000 it just doing that noise, but a wile back here where I live there where road construction I hit a pavement Transition it hit hard. I took the car to dealership they say there is nothing Wrong with wheel and tired but I still hear that noises
Sorry to disagree with your diagnosis but turning left loads up the RH bearing and will identify this as the faulty one if noisy, vice versa for the LH bearing (turn right to load up LH bearing).
Yep.
My right bearing was bad and got significantly louder when turning right, and got quieter when turning left. Replaced the left (driver's side) bearing first thinking that was where the problem was....and where I would have sworn the noise was coming from while driving. The noise persisted unchanged until I replaced the right (passenger's side) bearing.
how much you charge for doing this just one side? Passenger? I have changed the wheel bearing in hub, but never the one in the Knuckle(snap ring bearing)
Do you know where I can get the ball joint bolt to connect to the knuckle?
Hi great video, do you know why should I use a new ball joint bolt and a new axle nut. Can I just reuse the old ones? Thank you.
Old one should be fine
Good video! Ignore the Internet haters!
profesional
I don’t understand the tightening the ball joint clamp then something about 180 degrees. Can you please explain I’m about to do mine tonight.
Tightening to 180 introduces stretch on the fastener and puts the metal into the elastic loading region where it would recover from additional stresses.
Thats a new torq thing w torq to yield bolts etc....to prevent over tightening and make people buy more maintenance gear.....money in service parts industry. By design to make them money...not help the customer. Cars trucks worked fine 100yrs now torq ft lbs. nm degrees.....its not a race car.
An adjustable wrench is to be used only one way. Putting that bearing in he was using it backwards. Good way to break your wrench.
Weak jaw side is not for torq it may slip, round corners.
Hear the system engaging? Which system?
감사합니다
So I’m replacing my hub bearing on my 2017 sonic premier, do you need to purchase a new spindle for the cv shaft teeth?
I did not replace it on mine. If it is still good, then there is no need.
I have a little squeak in one of my tires I think just needs a new bearing but dear god all this work I think I’ll just turn the music up 🤣
Squeak is usually a bushing or brakes. Bearings grind and rumble when bad. Or vibrate
@@Dassick89 The weird part is it only squeaks when my foot’s not on the brake.. which makes me think it’s something with the brakes but what..? Any ideas? It squeaks as the wheel is spinning but if I’m using the brakes it doesn’t squeak at all.
Doing a wheel bearing /hub right now , pressed the new bearing into knuckle , then pressed hub into bearing , when I did that it blew the new bearing out . What am I doing wrong .
Make sure that the force is only on the bearing (inner ring) and the hub. (Do it at your own risk)
There is no wheel seal for this car, correct?
for all those who just happen to have a custom slide hammer. lol.
Wouldnt it be easier just to buy a new wheel hub assembly that has the bearing in hub such as a moog???
EDIT: apparently, part, that's only for the chevy crude
Hey I have a Chevy Sonic Everytime I turn the steering wheel all the while driving I hear a clicking sound is that the same thing?
Mostly likely a CV joint.
Did you replace the cv joint and did that fix the clicking sound?
Just did mine today
So what do you do if you don’t happen to have a home made slide hammer attachment? Lol
Yo anyone else have a wheel bearing do out you pop the wheel off and the axle nut is literally only on by like 2 threads? It’s only a 2018 with 60k miles also
26.3 Mpg? Damn, are you slamming the gas and brakes?
My sonic gets the same mpg
@@MattyDemello I get 29-31 in the warm season, winter is more like 26-27
3:30 I Thought i recognized I-80/74 lol
Get a better jack bro please
Yep, should have a floor jack for that. He's using the spare tire change jack that comes with the car.
Watching you do your wheel bearing and your brakes completely hurt my eyes
One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?
Did you know there's a free mental health facility in your town? Find it.