For the people saying that he has Blender 2.92; I'm doing it in 3.0 and it still worked perfectly fine. Stop complaining about something useful for such simple detail.
Stop chastising people for issues that you don't understand or think are trivial. There has been a big problem recently with UA-cam tutorials that use alpha versions or mismatching the versions when doing tutorials. With the rapid state of Blender development, this often leads to tutorials that don't work due to functionality changes. This burned me recently on a long geometry nodes tutorial 3/4 of the way through I found out the hard way that it didn't work with the newer system.
Nice. I only wish water could look good in eevee too. I have an animation I wish to work on and if I have a feeling if I attempt using cycles with my computer, it may just explode.
I got everything ready to render now I did something that caused the rendering to turn my screen gray when I turn it to a video the result I got was a gray video only if I knew what I did to the settings 4 days still stuck can't find any video of this issue
deepak great work. but i am quite new to blender and i got a specific project i am struggling with. i followed your video basically frame by frame but still mine does not do what yours does. is there any chance you can have a look at my project and maybe tell me where i went wrong.
Did you set the render engine to Cycles? Same thing was happening to me even when rendering until I changed it to cycles. Evee won't calculate the transmission of the water realistically, but Cycles does
hmm.. i cant assign different fluid types to multiple objects.. i tried using separate collections and it still wont work.. idk y this fluid stuff is so problematic to learn..
Hi Sir... This procedure works after following each step... My problem is how to render the animation despite of following the steps.... I tried increasing the resolution to 128 but still cannot render the animation....
Not working for me, which doesn't come as a surprise. Nothing happens when I bake (using 3.0.1). I wish I could say "Surprise! Software 'engineering'!" But that would be lying.
So it wasnt working for me, but then i noticed a little check box for liquid that i had to click, and once i clicked it then i saw the liquids after the first back
@@DeepakGraphics11 It took some time to figure it out I also had it in evee.. now I when I render it my results come back as gray screen and it render fast in a sec it's day 4 I till can't find what's causing it to be gray
For the people saying that he has Blender 2.92; I'm doing it in 3.0 and it still worked perfectly fine. Stop complaining about something useful for such simple detail.
And im in 3.3
and im in 3.1 and its work perfectly
Stop chastising people for issues that you don't understand or think are trivial. There has been a big problem recently with UA-cam tutorials that use alpha versions or mismatching the versions when doing tutorials. With the rapid state of Blender development, this often leads to tutorials that don't work due to functionality changes. This burned me recently on a long geometry nodes tutorial 3/4 of the way through I found out the hard way that it didn't work with the newer system.
@@deltaray3yeah, I tried everything with trying to get a fluid simulation, fluid only appeared once
Easy to understand and straight to the point, thank you!
All my problems in water simulation solved in 1video thanks bro
This helped me do exactly what I was meaning to do which was help me to shoot the water in an upwards direction!
Thank you for the tutorial! It’s very useful and detailed
You really helped me out bro! I couldn't get the bake to show up in anyway shape or form. But after I adjusted the resolution it worked perfect!
much much better than other videos thanks
Very usefull being a begginer and all. Thanks
I need to learn this. I will stop tsunamis once and for all.
Great video! thank you for sharing. You're a great teacher!
Thankyou for quick tutorial it was helpful
Very good tanks for edVery good tutorial, thank you
thanks bhai love you
Thank you !
Fluid sim make me very happy
i don t know why i do all the same things but i don't see the fluid
Make sure when you select the inlet(cylinder) under flow source mark the check box is planar
Thank You for this tutorial bro. A suggestion, you can do better with less " basically".
Cool,Thanks !
Thanks bro
That's basically something like that
Good work Deepak - appreciated
Thank you. :)
Good video. Thanks!
Bottom right corner indicates you're using Blender 2.92.0 for this tutorial where the title states ver. 3.0.
Nice. I only wish water could look good in eevee too. I have an animation I wish to work on and if I have a feeling if I attempt using cycles with my computer, it may just explode.
thank you so much
please help I tried to do it for 1 hour but I can get to work.im on 3.1.2 but I don't think that changes anything
I WAS SEARCHING "SOMETHING LIKE THIS "LOL
Blender in a nutshell "now we have this thing, but there is one problem..."
Nice!
If you could move your mouse from target to target instead of waving it around It can help people who might not have audio capabilities
You are right bro 🙏🙏
I got everything ready to render now I did something that caused the rendering to turn my screen gray when I turn it to a video the result I got was a gray video only if I knew what I did to the settings 4 days still stuck can't find any video of this issue
deepak great work. but i am quite new to blender and i got a specific project i am struggling with. i followed your video basically frame by frame but still mine does not do what yours does. is there any chance you can have a look at my project and maybe tell me where i went wrong.
Did you set the render engine to Cycles? Same thing was happening to me even when rendering until I changed it to cycles. Evee won't calculate the transmission of the water realistically, but Cycles does
@@aemyttyastro because eevee renders pbr materials, and cycle renders realistic lighting
Can you somehow control the amount of water in ie number of liters per minute?
there in no option of bake it all' in blender 2.82. what to do now ?
hmm.. i cant assign different fluid types to multiple objects.. i tried using separate collections and it still wont work.. idk y this fluid stuff is so problematic to learn..
Why my domain box is still visible in the render ?
You have to set the frame curser to 1 and not on 0
Hi Sir... This procedure works after following each step... My problem is how to render the animation despite of following the steps.... I tried increasing the resolution to 128 but still cannot render the animation....
Sar aap blendar kayase sikhe
Why blender fluid sim looks like jelly than fresh water, how to fix it? 😩
Why is my bake data showing 'Non resumable Cache: Baking mesh will not be possible? Somebody help me T_T
Baking cake is easier than this
can u make a rain falling on roof and then to the ground?🤔
Already have video on channel go and check it out..
6:23 what happened there?
FOR REAL
gondon
Not working for me, which doesn't come as a surprise. Nothing happens when I bake (using 3.0.1). I wish I could say "Surprise! Software 'engineering'!" But that would be lying.
So it wasnt working for me, but then i noticed a little check box for liquid that i had to click, and once i clicked it then i saw the liquids after the first back
Stop saying basically
Stop shaking your cursor bro, its like you’re teaching your self. 😮 too fast 💁🏻♂️
mine looks like pink milk instead of water
this is a basically a textured issue you might have used some texture instead of material,
@@DeepakGraphics11 It took some time to figure it out I also had it in evee.. now I when I render it my results come back as gray screen and it render fast in a sec it's day 4 I till can't find what's causing it to be gray
Pose Library par bhi Detailed Video Bana Dijiye
I saw hundreds steps
This number 6365 😑
your in blender 2.92 exposed
werid af
You’re weird go away
Terrible English listening mtaerial for me 😩
Grow up
Get real