@@soundsystem0094 That map comes with our sound deadening set. The placement is not critical though, just make sure you have some deadener every 12" or so.
Finishing up my ride, and this is next. I hadn't planned on gluing down anything.. Chevy didn't glue my original one in. Seat, shifter, and sill plates kinda hold it all down anyway.
Gluing it down makes it "hug" the floor and just improves the overall fit. The carpet we pulled from this truck wasn't glued either, but it had some obvious loose spots too. Ultimately it's up to you!
Hi Dave this was a very informative video. Should the entire carpet be glued down are only the edges I am in the process of installing my carpet Thanks
I like to glue the entire carpet down starting in the center and working my way out. I find that it ends up less lumpy and fits the floor contours much better.
@@henrydixon3159 We carry high grade carpet. Can't comment on what other suppliers carry, but you need to be careful with carpets that are loomed in a neutral color, then dyed to the intended color. Those tend to fade VERY quickly or just change color altogether. The carpet we sell is loomed in the intended color from the beginning and not just dyed to match. Check our selections at www.brotherstrucks.com
We go from the middle out to around 2" from the edge. We also recommend laying any potential wiring at the same time you lay the carpet, even if you wont be using it right away.
I've got a 69 Chevy panel that is looking for love in all the typical places. Should I ship my wallet to you to save time, while restoring in your parking lot outside the warehouse? Thanks for the instructional video's. Glad to see some familiar faces doing them too!
I noticed before you put down the insulation there was that black rubber padding. On my pickup I don't have that it is just the bare truck, am I good to put the carpet and insulation w/o that black rubber or do I need it?
Is it possible to give me all the item part numbers that is needed to complete the floor installation including the carpet this is my first time and I want to make sure it is done correct thanks
Henry, you have some options when doing the carpet. It's best to chat with one of our customer service guys so they can help you get everything you'll need while addressing your options. Call 800-977-2767 and we'll get you set up!
Dynamat would love for you to put it everywhere, but the truth is it's not necessary. You can place up to 12" apart and the sound dampening will still be excellent.
Not sure what year your truck is, so go to www.brotherstrucks.com/ and do a search for CARPET SOUNDPROOF, you'll find what you need there. Thanks for watching!
At 0:02 seconds into the video, in the intro portion. I am looking for those lights, with the four screws in the corners, I cannot find them anywhere on the website, can you point me in the right direction?
Still on the list, but not in a priority spot. Do you live in SoCal and need it done? If so contact our shop and see when we'll be shooting again and MAYBE they'll squeeze your truck in. Often times it's more difficult to find a truck that needs something done than it is to find something to do.
@@BROTHERSTruckPartsTV Where can I send you pics of my 1971 C10 Super Cheyenne.. 396 & it is a show truck, lots of Brothers parts! I am a body man. 45 years in the business, I am the best, I have the touch.
I ordered from lmc truck and I ordered a high hump on accident. We already cut the holes and stuff but there’s a bunch of extra material where the hump is and it’s just popping out. Do I have to order a whole new carpet or can I fix it!
You've got to replace the entire carpet. The high hump and the low hump are completely different molded shapes and you'll never get a good result if you try and make the high hump work.
Fantastic "How to" video. Thanks for the help and I look forword to this step (IF I ever get this far) LOL
David is a beast! He is alway on point with these how to videos. Watching this first, then doing the same install in the A.M.
Good luck with the project! Thanks for the feedback!
Working on my Chevy 79 installing my carpet. This video is the best help I got, thanks for the tips
Absolutely our pleasure! Thanks for watching!
BROTHERS Truck Parts have a question. Where did you guys get the guide map to know where to place down the sound deadening on a Chevy 79
@@soundsystem0094 That map comes with our sound deadening set. The placement is not critical though, just make sure you have some deadener every 12" or so.
Great video. My 72 C10 came with a lot of uninstalled parts, new carpet among them. This video will be a big help this summer when I install it.
Thanks for watching, good luck with the project!
awesome video ....thank you for sharing
Our pleasure!
Thanks for the help!
Our pleasure!
@@BROTHERSTruckPartsTV In case the head honchos wonder, these videos do make feel like I should always buy from Brothers.
@@billyhellmaker Thanks Billy, we'll pass that on!
Finishing up my ride, and this is next. I hadn't planned on gluing down anything.. Chevy didn't glue my original one in. Seat, shifter, and sill plates kinda hold it all down anyway.
Gluing it down makes it "hug" the floor and just improves the overall fit. The carpet we pulled from this truck wasn't glued either, but it had some obvious loose spots too. Ultimately it's up to you!
Great work, How would you run wiring under the carpet?
just tuck it under and make sure it doesn't get pinched by the seat brackets or anything else that gets bolted down.
What kind of tape did you use for seals on insulation.. just foil tape for like hvac?? Or duct tape?
Need video on gas tank carpet install.
We'll work on that.
Great
Hi Dave this was a very informative video. Should the entire carpet be glued down are only the edges I am in the process of installing my carpet
Thanks
I like to glue the entire carpet down starting in the center and working my way out. I find that it ends up less lumpy and fits the floor contours much better.
@@BROTHERSTruckPartsTV thanks for the quick reply. I also would like to get the best grade of carpet if there are different ones any suggestion?
@@henrydixon3159 We carry high grade carpet. Can't comment on what other suppliers carry, but you need to be careful with carpets that are loomed in a neutral color, then dyed to the intended color. Those tend to fade VERY quickly or just change color altogether. The carpet we sell is loomed in the intended color from the beginning and not just dyed to match. Check our selections at www.brotherstrucks.com
How far out from the middle would you use the adhesive on the carpet? Was thinking in cases where speaker wiring was needed in the future.
We go from the middle out to around 2" from the edge. We also recommend laying any potential wiring at the same time you lay the carpet, even if you wont be using it right away.
I've got a 69 Chevy panel that is looking for love in all the typical places. Should I ship my wallet to you to save time, while restoring in your parking lot outside the warehouse?
Thanks for the instructional video's. Glad to see some familiar faces doing them too!
You could certainly contact Dave Welch at A.R.T. Customs and ask him, but we don't do any service here at BROTHERS, only how-to vids!
I’m about to sound deaden my 1972 K10 and put in a carpet kit from your website. What spray glue adhesive should I use?
You can use just about any spray adhesive, but we typically use 3M Super77
I noticed before you put down the insulation there was that black rubber padding. On my pickup I don't have that it is just the bare truck, am I good to put the carpet and insulation w/o that black rubber or do I need it?
The black rubber we had down is sound deadener. You don;t need it, but it's always a good idea to cut down cab noise.
Show some videos on 1986 GMC S15 please I want to order parts I’m Restoring 👍
Thank you
pretty sure his name is Steve not David!
Nope, that's Dave Welch.
where did you get script molding on glove box door???
This was a customers truck, we don;t know where the emblem came from, sorry.
Is it possible to give me all the item part numbers that is needed to complete the floor installation including the carpet this is my first time and I want to make sure it is done correct thanks
Henry, you have some options when doing the carpet. It's best to chat with one of our customer service guys so they can help you get everything you'll need while addressing your options. Call 800-977-2767 and we'll get you set up!
What kind of spray on glue did you use
We use the one that comes with our carpet installation kit. You can use 3M Super 77 too.
wish I had found this befor I installed my carpet. I did not glue my carpet.
Pull it out and glue it... probably only about an hour job and the results will be killer!
is it useless to put Dynamat all over the floor? i've K5 Blazer and i'm wondering how many sound deadening i need. Thx
Dynamat would love for you to put it everywhere, but the truth is it's not necessary. You can place up to 12" apart and the sound dampening will still be excellent.
@@BROTHERSTruckPartsTV thank you for your answer! it appear on the video that there is already a layer on the floor. What is it?
@@skwermotors the customer had a layer of sound deadening material already installed when we removed the old carpet.
Were did you buy the insulation at?
Not sure what year your truck is, so go to www.brotherstrucks.com/ and do a search for CARPET SOUNDPROOF, you'll find what you need there. Thanks for watching!
At 0:02 seconds into the video, in the intro portion. I am looking for those lights, with the four screws in the corners, I cannot find them anywhere on the website, can you point me in the right direction?
You can find them here:
www.brotherstrucks.com/Parking-Lights-Trim/products/2010/
Does the sound dentening material and the pic map come with the deluxe kit
Yes
I know this is random but what is the name of the song used for the video?
It's a royalty free thing, pretty sure it's called "Sundowner"
Where's the instructions for the gas tank carpet covering?
Still on the list, but not in a priority spot. Do you live in SoCal and need it done? If so contact our shop and see when we'll be shooting again and MAYBE they'll squeeze your truck in. Often times it's more difficult to find a truck that needs something done than it is to find something to do.
@@BROTHERSTruckPartsTV
Dayton Ohio
@@BROTHERSTruckPartsTV
Where can I send you pics of my 1971 C10 Super Cheyenne.. 396 & it is a show truck, lots of Brothers parts!
I am a body man. 45 years in the business, I am the best, I have the touch.
@@1stguageinc409 send them to orders@brotherstrucks.com
I ordered from lmc truck and I ordered a high hump on accident. We already cut the holes and stuff but there’s a bunch of extra material where the hump is and it’s just popping out. Do I have to order a whole new carpet or can I fix it!
You've got to replace the entire carpet. The high hump and the low hump are completely different molded shapes and you'll never get a good result if you try and make the high hump work.
OR... buy a high hump and just fasten it with a few screws over the low hump. Then it's there if you ever do an LS swap.