How To Replace Shocks On Dodge Ram 2500 4x4 / Fox Racing 2.0 Performance Shock Installation
Вставка
- Опубліковано 29 лип 2024
- 2015 Ram 2500 4x4 OEM shock replacement with Fox Racing 2.0 Performance Smooth Body Shocks. How To Replace On Ram 2015 Ram 2500.
My Fishing Gear:
Shop Ventures Fly Co amzn.to/3nRzwD4
Redington Classic Trout Fly Rod amzn.to/2Sbkues
Redington Zero Reel amzn.to/3xvaIms
Scientific Angler Floating Fly Line amzn.to/3xugogp
Scientific Angler Dacron Fly Line Backing amzn.to/35tvMOd
Rio Fly Line Leaders amzn.to/3cOyn9r
Echo Base Fly Rod Kit amzn.to/3vAH6Cz
Mountainsmith Lumbar Day Pack amzn.to/3iP79Dp
Fly Fishing Landing Net amzn.to/3gHapht
My Trailer Gear:
ADCO Trailer Cover: amzn.to/3jKEuj0
Blackstone 22” Griddle W/Hood & Stand: amzn.to/2WU9CUj
Blackstone Griddle Accessories: amzn.to/3zS9TWd
Trimax Coupler Lock: amzn.to/3DUN9qX
Heavy DUTY Security Cable: amzn.to/3DKqopE
Amazon Masterlock Store: amzn.to/3BPbIUi
#HowTo #DIY #Ram
00:00 - Fox 2.0 Performance Racing Shocks vs Bilstein 5100
4:54 - How To Replace The Rear Shocks on 2015 Ram 2500 4x4
10:40 - How To Replace The Front Shocks on 2015 Ram 2500 4x4
*Disclaimer: This video and description may contain affiliate links where, if you buy an item through the link, I receive a small commission at no additional cost to you. This helps support this channel so I can continue to make more videos like this. Thank you for your support! #roadandreel - Авто та транспорт
Ordered my fox 2.0 with reservoirs for the front and back yesterday. Can’t wait to get them done. This video helped a bunch. Thank you 👍🏻👍🏻
Awesome! You won't be disappointed. Just make sure the reservoir is in the right spot. The tire shop twisted mine and the tire rubbed it all up and ruined the sticker before I fixed it. Good luck on the install!
Those are some manly tires.
No need to lift up frame when installing? Less compressing by hand when putting in? Just curious ..about to install..
You could, but I didn't need to. Use your best judgement and if it makes the job easier, go for it!
Do you have part numbers for the front and rear shocks?
I don't have the part number, but here's the link where I purchased mine. www.unlimitedtruck.com/2014-2018-ram-2500-4wd-fox-2-0-performance-shock-kit?gclid=CjwKCAjw_NX7BRA1EiwA2dpg0hYxGQbJiNI2ikWaYsCmjmgcigbbwQMCtTfHDUnr0hDZVBr8bIQJMBoCTh0QAvD_BwE
Hi! hope all is doing well. Do you have the specifications? I could not get into the web unlimited truck.
Thanks in advance.
I'll look all that up today and try to get it posted.
Have you had any trouble with the shocks moving rotation, I mounted mine the same but for some odd reason the passenger side rotates and reservoir hits the tire!
@@ianramirez3364 that's the same one I had issues with! I've only had it happen once and I thought it was the tire shop that did it during the inspection.
@@RoadandReel oh ok, yea it’s happened about 3 times and I’ve tightened them down all the way and it’s still moving kinda lost on what to do now lol!
@@ianramirez3364 there's a hole in the inner fender shroud. Can you try to use that to wire tie it into place using the reservoir line? It could also be the internals that are forcing it to rotate. Maybe let it rotate again, then loosen the reservoir and move it back in place.
How did they effect your towing abilities? I have a 2014 with the Cummins and bilstiens all the way around and they are beating us to death. Want to switch to fox, but use the truck to tow our tractor on our gooseneck a good bit.
They perform way better than the Bilsteins I had on my old Dodge, but it was a 2003 and I would tow a 9,000lb tractor and trailer with it during the summer. So far, the heaviest thing I've towed is probably 6 or 7,000lbs of concrete and it was way smoother than my old truck. But, those are also 2 different suspensions. I don't think I'll ever go back to Bilsteins, but I don't want to tell you the Foxes will solve your problem, either. At close to $500 for rear shocks, you could almost get a nice airbag setup for the rear and then maybe switch your shocks out when the Bilsteins wear out. Swap them out on warranty, then sell them and try to offset the expense of the new Fox shocks.
@@RoadandReel I replace Thuren sway bar and Fox ATS steering stabilizer, also DPF back kits, I keep all the stuff in the attic. When I plan a new truck I will swap back :)
@@dmtycn that's an excellent idea!
Does the reservoir have a knob to adjust the stiffness at the end of it?
Not on these ones, but they do have that option available.
My 2016 Ram 2500 on 20” fuel
wheels and Michelin Defenders 295/60R20 and it rides so stiff and bumpy. Uneven roads or roads with bumps, cracks, etc it rides and rattles me to death. My 2018 Raptor hugged all the bumps and uneven roads and stayed planted and rode like a cloud. My 2016 ram hood and skips and rides rough. Will these fox shocks help? Do I need to have a leveling kit as well? I want the truck to ride soft. I never haul anything so not worry about payload at all.
Mine rides way softer than it did when stock and it would nearly run off the road on washboards. Now it handles the washboards way better. I have also switched from the Toyo Open Country AT II to the Cooper Discoverer AT3 XLT and man these tires ride so much better! The load range E tires make it tougher and the Raptors are made for high speeds off-road while the 2500 is for hauling. I am really happy with the upgrade, but it's a pretty stiff price point. If you're just trying to soften your ride, maybe start with tires when you need them and then go for the shocks if that doesn't help.
I have a 2014 ram 2500, and run 40 rear psi and front 50 psi when not hauling. Seems to help a lot.
it's because you have 20" wheels. go with a 17" wheel and good shocks. Your ride will be a lot better
They say only the non reservoir shocks fit the rear but the hole in the frame is kind of ovaled out enough for the hose. I bet you could fit the reservoirs in the rear too. I wonder if anyone has tried? Maybe the valving in the rear is different too? Idk
I bet you are right. There is plenty of room and with a long enough hose, the reservoir could easily clear everything and be mounted to the frame or elsewhere out of the way.
Did you find the correct reservoir shocks for RAM 2500?
My bolts came off crazy hard even with PB Blaster, nothing like yours.
What part of the country are you in? Any salt and water on the roads?
Where did you order? Thank you
I think these came from realtruck.com, but I would check around because some places have better deals than others.
When you repositioned the shock did they run on your tires?
No, no rubbing at all. There's plenty of clearance on these with 275/65R20 tires. This is a 4x4 3/4 ton, so it's up a little higher than some other models.
@@RoadandReel maybe I installed them wrong but I was getting rubbing on my tires.
@@adrielespinoza9804 Are they rubbing on the reservoir or the shock itself?
@@RoadandReel it was rubbing on the reservoir. I saw the video and thought I did it right but I have a 2017 ram 2500 power wagon and it shouldn’t have been that different. Also I could be an idiot haha
@@adrielespinoza9804 lol, see if you can rotate it out of the way. They also have other mounts that will offset it a bit.
How do you like the shocks?
So far so good and they've made the ride so much better.
shit..not much down travel..like 3" did you buy too short of a shock? unless you're on road mostly..but offroad..you'll get not much down travel on the rear.. fronts looks like it has enough.
Honestly, I thought the same thing. I'm set up more for towing or traveling at high speeds on rough roads. They were a little longer than stock, but I just don't think the solid rear axle on this truck articulates that much. I'm not a big fan of going on crazy 4x4 roads in my daily driver, but if that was the case, you can get them in many different lengths to suit your needs.
Great job, now go wash your truck.
Ha, thanks! I'm saving water 😉