BMW E46 Petrol Engine Coolant Temperature Sensor 1 Location Replacement How To DIY 320 323 325 328
Вставка
- Опубліковано 20 лип 2020
- How to change the coolant temperature sensor on the side of the engine block. BMW E46 3 Series 320Ci M54 engine 2000, 2001, 2002, 2003, 2004, 2005 and 2006. BMW Part Number: 1433076
- Авто та транспорт
Great video and hard work. You can replace more things while you are there. But guys you can do it without removing the intake manifold too. Just take out the walls/plastic between the engine and heater blower, under the windscreen, and use a 3/8 flexible ratchet and a 22mm socket. You have to take out the fuel rail so you have better access. Took me many hour to realice that it was possible. Did it on my 323i e46. Hope this can help someone as I spent days trying to replace this sensor..
Thank you! I didn’t look to see if there was another way but to be honest it wasn’t that bad removing the intake manifold. I like to see what I’m doing.
@IAMASPANNER i was able to catch the fuel pipe and bend it back slightly allowing the 22 socket to just go straight onto the sensor with 2 long extenions.
If its going out will it make a kind of wet fart sound at 1k rpms.
What did the car do before you change the sensor did it only cranck
What a complete ball-ache to get to, but I see why they've done it - the back of the engine is furthest away from the airflow, so it's the hottest part. They're just erring on the side of safety.
If you've got the manifold off an M54, for god's sake, replace the manifold gaskets, the coolant pipes under the manifold, and the CCV system - the gaskets are too cheap not to, and doing the CCV without the manifold off is the stuff of nightmares.😁
You might never be in there again, so get as many "while I'm in here..." jobs ticked off as you can!
OK. So while mechanically inclined, I don't know what the CCV is. I'm trying to teach myself to be a mechanic. I'm currently trying to replace the sensor in the video on an E39 530i with an M54. Manifold gaskets are something I hadn't considered but I'll look into it.
@@dennevyn05 CCV is "crank case ventilation" - a kind of loop of pipes that are supposed to take oil vapours out of the head and put them back into the sump. But it is a known weak design, which is why this engine is a notorious oil-burner.
There is a way to replace it without taking the manifold off, but it is extremely awkward, and not recommended.
Manifold gaskets very rarely fail, but they are very cheap, and you are already in there😁.
There is no way to go underneath the car above 10:52 the starter to get to that senor
That is a job for a garage - there is no way I would attempt a DIY job that look horrific
It’s always a nightmare the first time but the hardest part is just getting started. I still get nervous about new bug jobs but I always succeed eventually.
Hallo one question please. When i term my car on the fan starting directly is this sensor is the problem too?
A faulty temp sensor could cause the issue if it was giving a too high reading but there are other modules and scenarios that could cause this too.
Could have just used a crowfoot wrench with an extender, it was made for this type of job and DIY.
I don’t have one, I usually do big jobs in a friend’s workshop but this was just a small one. I appreciate that the sensor can be removed without removing the intake manifold but at least everyone gets a better look at it on the video.
@@IAMASPANNER I used a stubby 3/8 Ratchet that has a flexible head with a 7/8 crowfoot wrench and got it off by not removing the intake manifold on my first try. My BF was gonna do what you did in the video and I surprised him by removing it myself.
How did u get too the spot? Did he take most of the parts off?
@@ThePs3ownsss OK so, there this plastic wall thingy that has 2 torx bit screws in them on the fire wall, try removing that first then you have a bit more wiggle room. Your alarm is also behind there.
Good to know since I'll probably have to do this job eventually on my 2002 e46...@@Ayixlia
Did you have to drain coolant?
Surprisingly not, nothing came out at all.
@Tolly Swft I've had thumping noises, then leaks....ive changed all hoses and thermostat, do you think this will work?
Can this fail and give a false overheating reading?
Yes
Cant hear!!!!
I know there's 2 temp sensors bank1. And bank 2. Where is coolant temp sensor 2
Hi, see my other video here: ua-cam.com/video/Rod_ehvJPu0/v-deo.html
You don’t have to take the manifold of do you
I didn’t think it was possible to get to it without removing the manifold but you’re not the first person to say this.
You can do it without removing the intake. Ive done it on a 325ci a few years back. Lots of wobbly sockets and joints and fiddling but still less of a pain than removing the intake.
@@StillthatguyJake what about on a 318i n42 as I’ve got code 1115 coolant temp sensor plausibility I’ve replaced the one in hose but code won’t come of
⁹
You didn't have to remove the intake manifold to do this job thier is a faster way doing it
Please do tell, I’d have loved not to do this job!
@@IAMASPANNER the tools you will need is 02 sensor tool the one with the hole on the side that will fit around temp sensors you will need to remove miro filter and it's housing then behind that you will need to remove 2 torque screws and pull out the hard plastic plate that was in behind micro filter then you will have plenty of room to put your hands and squeeze the plug and pull it out with the 02 sensor tool put it over the sensor at an angle use extender and socket turn to the left then remove it
@@isrealperez9069 I'm going to try this method, thanks for sharing.
@@isrealperez9069 I really want to try this
My M3 is in at my local Indy gor this job along with a service today. I’m hoping he knows the easier way! What a proper pain in the a*** job that is otherwise, fancy locating a fallible part under all of that inlet kit!! My wallet might be crying later if they’ve had to do it the ‘long’ way.
Dont buy Facet? They are very cheap made. Delphi is ok. Next time buy Bosch or Hella.
It must’ve been the only one on the shelf or I wasn’t sure it would fix the issue, I usually go Delphi or above
You see i bought many many cheap ones , facet, Calorstat, Eps. And all of them made the problem worse. Cheap ones does work but they dont give good readings. I installed those cheap ones, and my car whas reading 103 c instead 92 c. So i got a very sluggish car once the engine driving more than 15 minutes.
After buying a good brand Hella, my problems whas solved.
@@_________________7791 I agree completely, at my friend’s garage in at least 2 occasions I’ve replaced thermostats that have just been replaced with faulty cheap versions elsewhere!