Mount Your Sonos One with the Flexson Wall Mount Kit Install

Поділитися
Вставка
  • Опубліковано 7 лис 2024

КОМЕНТАРІ • 23

  • @energyrecoveryinc.1157
    @energyrecoveryinc.1157 Рік тому +24

    like the features, setup was difficult for some of my devices (August Door lock, ua-cam.com/users/postUgkxhB5YOMNj04GuoAosExygP4cH-dKeb4aB Bose speaker)... but all switches and outlets (5), thermostat, tankless water heater. Unfortunately all I can do is turn on/off Bose. It doesn't support volume or changing channels, but I believe that is due to the particular speaker I have.... Worth getting if you already have other devices to use it with... I don't sit around and ask Alexa questions much so that doesn't really matter to me....

  • @DennisBM
    @DennisBM 10 місяців тому

    I heard so many different stuff about this wallmount... does it vibrate/resonate when you crank up the volume? few webshops has reviews that say they do, like a lot. and a few others say they're fine?

  • @purelife1944
    @purelife1944 2 роки тому +2

    Is it not better to mount at ear level, so lower down? That’s what I’ve read 🤔

  • @MrZACATECANO100
    @MrZACATECANO100 2 роки тому +1

    Any power cord you recommend for longer reach.?

  • @HipFitSoooGood
    @HipFitSoooGood 6 років тому +2

    Thanks for this vid! We're about to install ours today. You made it look easy, and we'll know what to expect. Just subbed and liked!

  • @tdadarwala
    @tdadarwala 2 роки тому +2

    will this work for the Sonos One Gen 2?

  • @cyclechef2011
    @cyclechef2011 6 років тому +1

    How's that Cling Wrap treating you? Would you recommend?

  • @rickboyer6676
    @rickboyer6676 5 років тому

    What is your final plan for the wire? What if it is not long enough, can another (general plug) be purchased and compatible? TY.

  • @nntpdump
    @nntpdump 6 років тому +3

    Can it be somehow placed upside down, so that the buttons are accessible if you stand underneath the speaker?

    • @chrismbeeson71
      @chrismbeeson71 6 років тому +1

      Yes, the mount can be rotated 180 degrees so the controls are at the bottom and accessible.

  • @ModernDayTech
    @ModernDayTech 6 років тому +1

    cool mount!

  • @aaturshah2943
    @aaturshah2943 5 років тому +1

    How do you hide the cable?

    • @mattb9664
      @mattb9664 4 роки тому

      Just pig tail an existing receptacle and run the Romex, in wall, right up to the speaker, and install a new single-outlet receptical. And buy the $15 1-foot flexson power cord.

  • @mannyfantis6419
    @mannyfantis6419 6 років тому +7

    It would have been nice to have a tutorial to hide the wire. Any schmo can drill a couple of screws into the wall.

  • @JB-vc6xj
    @JB-vc6xj 2 роки тому +1

    You didn't had to squeeze the little screw part, you should not have clamped the power cable between the holder plate! Not so smart 🙄🙈

  • @breezair3875
    @breezair3875 5 років тому

    Which holder support for sony bdv-e3200

  • @danielgeiles
    @danielgeiles 4 роки тому +2

    Drywall is plenty strong enough. Use drywall anchors!

  • @TAPPChannel
    @TAPPChannel 4 роки тому

    man... refresh your house and paint the wall before investing in such a nice stereo :) I thought my monitor is filthy but its not!! :D

  • @gerard3797
    @gerard3797 5 років тому +1

    Why go for a black speaker on a white wall and than worry about placement and power cord esthetics 😂

  • @xt486
    @xt486 Рік тому

    mate you struggling.. hard to watch

  • @ModernDayTech
    @ModernDayTech 6 років тому

    cool mount!