The "customer"... wanted you to fill the body lines... with Bondo... on the hood... that gets hot... then cold... and slammed... I'd love to see a recent picture of that job.
You should seriously remove this video...Fiber glassing over slightly sanded clear coat, using body filler to fill up deep body lines, sanding the primer with a scuffing sponge rather than blocking by hand..And worst of all you can't even mix body filler properly! This is why so many panel shops have such a bad reputation and ruin it for the rest of us.
WOW!!! I learned something from this video DON'T take any of my vehicles anywhere near your shop. I lost count trying to keep up with the mistakes that were made from the very beginning. Dont know how many brain cells died watching this
End result was a good looking scoop,why did you go through all that trouble if it was not going to be functional? Good job regardless,I would of just made it fuctional,helps dissapate all that engine heat...good video!!!
people lie on their titles just to get a view ....the title is how to mold a scoop not how to improve looks but yeah its great stuff i finally see ....good video....
i would say a few words but i wont. i think alot of you had already said it. i live in hawaii and believe it or not you may think we are dumb in body work but this would be a waste of time for me to do on my truck. im no out there for only looks. im out there for looks and the performance, if i am going to spend that much money for paint, bondo, glue, resin, and fiberglass not to mention the time and effort, yea i would make it work for what it is made for...PERFORMANCE.
lol, i purchased the exact Westin large hood scoop for $60 at Summit Racing in Nevada... all i did was peel and stick it on, polish it up with Meguiar Final Destination and it was ready in under an hour and gorgeous... i could see doing all this work if the hood scoop was functional... its just an Ornament decoration... but to each his own... he did a good job at what he wanted to do... anyways... the beat goes on........even though he forgot to put mesh in the scoop intake...
great job fellas!! although there are others that do it other ways ,but cant see why they get so pissy about it ,a good job well done,have seen allot worse .. cheers
I just found this, wow....I don't know what to do, laugh or giggle like the other 33448765278 people that has seen this? I'm flying 30tho feet in the air on my home and can't stop laughing lol. What you have seen, can not be unseen.
lol you changed a dodge hood to a wrx..congratz!lol (dont get me wrong i love my wrx) i actually flinched when you started sanding on the snazzy newish hood ha. nice finished work tho and good video flow for tutorial
you never pt any bonding agent on a painted surface, the hood should have been bare metal and the adhesive would be placed between the scoop and hood bult up with fiberglass and sanded and refilled with fiberglass and then duraglass and very little filler,and a hood still might not last a very long time because of flex ,heat and slamming the hood
Please tell me this video is a joke? i wouldnt do this "quality" of work to my worst enemy's car lol " smooth as glass" if glass has hell of ripples then yes he nailed it haha. i dont normally comment on videos but this was almost unreal lol.
i wouldnt let this guy wash my car, much less do a hood scoop......might have just as well made the entire scoop out of bondo and thrown it at the hood from 12 feet away
yeahh this is a terrible video. so many things here are done completely wrong. if it was done right with the glue and the fiberglass, there would be no need for body filler at all whatsoever.
commoncents you didnt think this thing has forced induction or any other hiperf needs for open scoop did u its just for show on most cars...open vent on that thing not make any hp difference at all
Man you created so much extra work for yourself you could of even masked of the area where your applying fibreglass etc anyway it's all about learning I've seen on youtube different ways even using reofill to attach scoop to bonnet then feather out with bodyfiller also wouldn't this cause air pockets between the scoop and where you have applied fibreglass sheets and wouldn't it eventually crack
the only reason this guy didn't take the video down with all the comments that are being is because he died shortly after making a rama wearing nothing but a bandana well breathing in all this stuff! Step one for all the resin I own on the hood, Step 2 poor all the pancake mix, ( body filler) I own on the hood, step 3 cook till done
first i'd rather bolt it on, it looks nicer than any effort to mold it in. then ,seriously who glues two parts together like they are sticking tape over the edges? you need to use glue BETWEEN surfaces last: this may appear to look good in the end.. but the quality is Zero , 1 decent pothole and your solid rock layer on the hood might break.. and it will over time.
I dont get it? with all that time you spent doing that work, why didn't you at least cut out the under part and make that scoop do something useful. And if you where just going for the looks, I think its easier to just paint the scoop and then glue it to the scoop or use that real thin double sided tape. IDK I think u could have done alot better. But good job on the paint. It looks good, and smooth for real. You should put some black grill on the front under lip if you arent gonna cut the hole out. Like that it looks like is there for something.
Wow, your body work makes me feel allot better about mine! Thanks
Lmfaooo 🤣🤣🤣🤣👍
Holy Christ the songs on the radio are giving insane throwback vibes
The songs playing in the radio take me back in time, feel like 8th grade again.
sounds like 70s Kungfu movie narration, which is awesome! Thumbs up!
you gotta love the guy's taste in radio music :) and the hood looks great.
The "customer"... wanted you to fill the body lines... with Bondo... on the hood... that gets hot... then cold... and slammed... I'd love to see a recent picture of that job.
u have opp playing in the back. that deserves a sub!
Came out actually reall really good . Good job
You should seriously remove this video...Fiber glassing over slightly sanded clear coat, using body filler to fill up deep body lines, sanding the primer with a scuffing sponge rather than blocking by hand..And worst of all you can't even mix body filler properly! This is why so many panel shops have such a bad reputation and ruin it for the rest of us.
ForcedFalcon 100% correct
Agree
Oh wait I know he left most of the clear coat a a release agent because that's exactly what will happen when the bondo comes off
Holy shit .... just added 800 lbs to the front of this truck !!
OMG! This whole time i have been using bubble gum to mold on stuff!! Great Video!
Had to watch to the end...kinda like the Not seen on TV vid back in the day.
Not bad at all,looks like some folks are clueless on how to do this kind of work.99 percent of body shops do it this way.
WOW!!! I learned something from this video DON'T take any of my vehicles anywhere near your shop. I lost count trying to keep up with the mistakes that were made from the very beginning. Dont know how many brain cells died watching this
End result was a good looking scoop,why did you go through all that trouble if it was not going to be functional? Good job regardless,I would of just made it fuctional,helps dissapate all that engine heat...good video!!!
this was the funniest thing ive seen in a while.
people lie on their titles just to get a view ....the title is how to mold a scoop not how to improve looks but yeah its great stuff i finally see ....good video....
one of the best hack jobs I ever saw
Straight forward man. Loved it
Title should be "How to ruin a perfectly good hood"
Why would you do all that work and NOT make the scoop functional??? FAILED!!
No shit 😂😂😂😂😂
That looks fantastic!!!
the last time I smoothed in a crack with my fingers I got a slap!
i feel dumber now that i have watched this
Looks grrat, I just bought one for my Dodge Ram. Can't wait to see how it comes out of the body shop. 😍
This gave me a good idea for my 96 cavalier, but I plan on sanding the entire hood right down
i like this video, i wish that ur shop was close to my house so u can put one on my tacoma. i love ur work.
question at @1.00 ....why did u not put glue under the scoop? just along the sides?
looks ready good ! you know what your doing
I’m so confused, he molded a hood scoop that was already installed on the hood. Lol. What is happening?
10 years ago lol working on a blazer that someone finished halfway and didn’t sand. Got my work cut out for me
Final product looks nice.
Just gave Forced Falcon a thumbs up on that
With the time and labor to mount this scoop, I feel it would be more cost effective to buy a cowl hood.
i would say a few words but i wont. i think alot of you had already said it. i live in hawaii and believe it or not you may think we are dumb in body work but this would be a waste of time for me to do on my truck. im no out there for only looks. im out there for looks and the performance, if i am going to spend that much money for paint, bondo, glue, resin, and fiberglass not to mention the time and effort, yea i would make it work for what it is made for...PERFORMANCE.
I laughed so hard 😊
lol, i purchased the exact Westin large hood scoop for $60 at Summit Racing in Nevada... all i did was peel and stick it on, polish it up with Meguiar Final Destination and it was ready in under an hour and gorgeous... i could see doing all this work if the hood scoop was functional... its just an Ornament decoration... but to each his own... he did a good job at what he wanted to do... anyways... the beat goes on........even though he forgot to put mesh in the scoop intake...
i like how you got right into it,,,
HI, just wondering, do you think by opening and shutting the hood , will the bondo that you used to smooth out the hoof\d will ever crack ??
the plastic to metal bonding glue, which exact one did you use? im doing similar but with a spoiler
great job fellas!!
although there are others that do it other ways ,but cant see why they get so pissy about it ,a good job well done,have seen allot worse ..
cheers
I just found this, wow....I don't know what to do, laugh or giggle like the other 33448765278 people that has seen this? I'm flying 30tho feet in the air on my home and can't stop laughing lol. What you have seen, can not be unseen.
Damnnnn that's dope as hell! A fake scoop made into the hood
why did u fill in the vent?
You should rename the vid to - How NOT to mold a hoodscoop.
LMFAO! Shit job!
Fucking ROUGH AS GUTS!!! LMAO
No doubt!
Sax is .massasszges to, but
lol you changed a dodge hood to a wrx..congratz!lol (dont get me wrong i love my wrx) i actually flinched when you started sanding on the snazzy newish hood ha. nice finished work tho and good video flow for tutorial
Was this a parody video??? That old man absolutely reeked of shame and disgust of whats being commited in the body shop LoL 😂😂
Bad assss,,,,, people just hate
i quess thats one way to do it...? Hows it holding up though?
you never pt any bonding agent on a painted surface, the hood should have been bare metal and the adhesive would be placed between the scoop and hood bult up with fiberglass and sanded and refilled with fiberglass and then duraglass and very little filler,and a hood still might not last a very long time because of flex ,heat and slamming the hood
very nice.
looks nice.
thanks, CVNT
GREAT VIDEO! one of the best tutorials ive seen on here in a long time
Wow, every single technique used in this video is absolutely horrendous.
this guy is sick
That’s some nice girlie dance tunes in the background.
I can't tell if this is a joke or not.
hey man I really like your hood project.can you please tell me where to get the plastic to metal bonding agent
How many hours work was that. ? Seems like way too much glass and enough bondo to sink a battleship.. But, it looks good in the rain..
at first i was like wtf but it actually turned out great... i would have cut an opening in the scoop to give the look of a functioning scoop
its a lot easier than this dude you made a lot of work for yourself
Great job
What is the plastic to metal bonding agent that was used? and do you know where I can get it?
that filler looks kinda thick filling the body lines, why not use duraglass first?
LOL !!! Dude your fired,,,,,and no,, I ain't payin
Did the scoop finally come flying off?
nice work.
Kagaron ese capot, con mucha masilla la cual se rajara con el mismo calor del motor
Please tell me this video is a joke? i wouldnt do this "quality" of work to my worst enemy's car lol " smooth as glass" if glass has hell of ripples then yes he nailed it haha. i dont normally comment on videos but this was almost unreal lol.
looks wavey
nice wooork how long didi it take
nice work
well i wanted to do this to my 04 lancer, but because i actually wanted cold air to be funneled over the aftermarket ram air intake, not this shit...
I'm no car person, like at all, but that entire Body Filler segment made me cringe.
I think it came out lookin fuckin nice
ouch, dude you should seal it befor base or clear or even single stage.
First time you slam the hood...crumble
Specially the 1 1/2 " thick bondo he "Smoothed the hood indentions" with is going to fall out all at once !!
i wouldnt let this guy wash my car, much less do a hood scoop......might have just as well made the entire scoop out of bondo and thrown it at the hood from 12 feet away
Title should be: "How to mold a hoodscoop in 1978"
Can u comment all the stuff so I can purchase them to do it
yeahh this is a terrible video. so many things here are done completely wrong. if it was done right with the glue and the fiberglass, there would be no need for body filler at all whatsoever.
oh my gosh I just seen you drop the metal lid onto the bonnet and my jaw dropped. You obviously dont do this for a living.
Let the sanding begin!!!
Says use metle to plastic bonding agent but puts it on paint.....tell me again how this is going to stay together
where did he get that vent?
Why didnt you just use the plastic to metal bolding an filler..?? I think it came out alright.. I noticed at the end u sprayed water on the hood lol
oh my lord. you're fired.
No bake?
cooooooool bro
I love the 2012 jams
commoncents you didnt think this thing has forced induction or any other hiperf needs for open scoop did u its just for show on most cars...open vent on that thing not make any hp difference at all
Man you created so much extra work for yourself you could of even masked of the area where your applying fibreglass etc anyway it's all about learning I've seen on youtube different ways even using reofill to attach scoop to bonnet then feather out with bodyfiller also wouldn't this cause air pockets between the scoop and where you have applied fibreglass sheets and wouldn't it eventually crack
but does it work? no! PRICELESS!!!!
the only reason this guy didn't take the video down with all the comments that are being is because he died shortly after making a rama wearing nothing but a bandana well breathing in all this stuff! Step one for all the resin I own on the hood, Step 2 poor all the pancake mix, ( body filler) I own on the hood, step 3 cook till done
not even close to the proper procedures!! waste of time and money!
looks good but what about the quality
How long did this take?
first i'd rather bolt it on, it looks nicer than any effort to mold it in.
then ,seriously who glues two parts together like they are sticking tape over the edges? you need to use glue BETWEEN surfaces
last: this may appear to look good in the end.. but the quality is Zero , 1 decent pothole and your solid rock layer on the hood might break.. and it will over time.
This part uses a double sided tape under the part, the gleu was just a reinforcement.
I dont get it? with all that time you spent doing that work, why didn't you at least cut out the under part and make that scoop do something useful. And if you where just going for the looks, I think its easier to just paint the scoop and then glue it to the scoop or use that real thin double sided tape. IDK I think u could have done alot better. But good job on the paint. It looks good, and smooth for real. You should put some black grill on the front under lip if you arent gonna cut the hole out. Like that it looks like is there for something.
Cuz he was too lazy to take off the scoop
Makes me itch just watching this😮
mm como pesara ese capo con un quintal de masilla que manera de dañar las cosas