EDIT: Someone told me that in the Vents version cover, there are four tapes that you can use to attach the heatsink to the ALLY fans to ensure it doesn't wobble. I didn't know the purpose of them while doing the installation. Still, Mine doesn't wooble, but you can use those tapes it comes with for a better connection. THANKS to "AppropriateBend8671" from Reddit for this tip. Please note that I personally purchased all these covers out of my own pocket, and my opinion is based on actual results and my own experience. I also did benchmarks with the default Memory timings & no tweaks applied from previous videos, BIOS version used 336 you can buy the JSAUX Vents Version here, LINK: jsaux.com/products/rgb-transparent-back-plate-for-rog-ally?variant=44768296861916 Also if you have the RGB Version already, you can get the heatsink separately that can be installed equally the same on your back cover, LINK: jsaux.com/products/rgb-transparent-back-plate-for-rog-ally?variant=44768296894684 You can get the HandheldDIY cover here, LINK: www.handhelddiy.com/products/transparent-back-cover-for-rog-ally New guide on how to setup up to 50w on the ALLY: ua-cam.com/video/oP_LjZm65vc/v-deo.html ROG ALLY playlist: ua-cam.com/play/PLg8ANjUNzqfPWpS6QgZTK62-QXOhr0XhF.html If you enjoy my content Subscribe & Become a member to activate extra PERKS Pateron Page: www.patreon.com/TECHOSAUR Join the TECHOSAUR Community on Discord here : discord.gg/PXmJY6BP8b. you can seek technical assistance, exchange ideas and experiences, relax, share memes, make video request and most importanly feel at home
Thanks, yes, it is time-consuming! But it's worth it when others see which is the best for them. I have no sponsoring with any of those third-party black covers
do you think it’s possible to use the jsaux heatsink with the handhelddiy backplate? I want the benefit of the heatsink but the white backplate of the handhelddiy one as well as the kickstand
Unfortunately, the heatsink is customized to work only with the JSaux backplate. It doesn't work, even on the original, because of the cuts they've made that only theirs has, and it goes right in place
Is there a thermal compound or pads between the big heat sink and the allys? I feel like that that could make a difference to cooling if that hasnt been done
I just tried it, and it's not possible to put that heatsink on the HandheldDIY because it has some plastics that get in the way, so it doesn't even close. The JSAUX has a lot of empty space in the middle I made a short clip if you would like to see it. drive.google.com/file/d/1-X9i6qQtENhH_UGzpo1CZLGv5E8REQog/view?usp=drivesdk
You are the only one who said Jsaux Vent is colder than handhelddiy (as far i watched YT) How come only a backplate without sitting on active cooling can make such impact? Almost 20°
I'm not a thermal engineer, but passive cooling can do a lot. Just like with SSD drives, when you install a high-quality heatsink on it, it reduces temperatures by half. This heatsink manages to cover all the heat generated that conveniently gets carried away by the ALLY two active fans. Just by having a dense heatsink that covers the spot that generates heat to hold as much and then direct it away to the fans, it works well. I'm not an expert in this field, but I'm showing you the results I got, and in my humble opinion, this heatsink is the best way to cool the ALLY while looking nice and not having a protruding heatsink out of the back cover.
I've tested both backplates, and the HandheldDIY backplate outperforms the JSAUX. The JSAUX performs better on loads up to 8 minutes long at 30W, but once the JSAUX heatsink gets heat-soaked, the heat has no way to escape the aluminum chassis. I did 1 hour of gaming on each setup at 30W with a fixed fan speed, and the HandheldDIY backplate finished 6 degrees cooler.
i really appreciate your video, but i need to know if a can put the heatsink of jsaux to the backplate original (the white). I have the idea to buy the jsaux heatsink and cut the area for the sdd, because the temps of those components fluc diferent
I think you will need to modify the original backplate to make it fit, as its many plastics will block it. The jsaux cover is made with the intention of going in and making contact with the cooling system of the ally. The original one has some plastics that will prevent this, but if you can trim them, it should work.
I feel it’s stupid and dangerous to spread the huge amount of heat from the main heat pipe to the ssd. Even when cooling together you can’t warranty it’ll be cooler than leave it alone. Why make it also suffer the constant high heat while it normally can be cool
EDIT: Someone told me that in the Vents version cover, there are four tapes that you can use to attach the heatsink to the ALLY fans to ensure it doesn't wobble. I didn't know the purpose of them while doing the installation. Still, Mine doesn't wooble, but you can use those tapes it comes with for a better connection.
THANKS to "AppropriateBend8671" from Reddit for this tip.
Please note that I personally purchased all these covers out of my own pocket, and my opinion is based on actual results and my own experience.
I also did benchmarks with the default Memory timings & no tweaks applied from previous videos, BIOS version used 336
you can buy the JSAUX Vents Version here, LINK: jsaux.com/products/rgb-transparent-back-plate-for-rog-ally?variant=44768296861916
Also if you have the RGB Version already, you can get the heatsink separately that can be installed equally the same on your back cover, LINK:
jsaux.com/products/rgb-transparent-back-plate-for-rog-ally?variant=44768296894684
You can get the HandheldDIY cover here, LINK:
www.handhelddiy.com/products/transparent-back-cover-for-rog-ally
New guide on how to setup up to 50w on the ALLY:
ua-cam.com/video/oP_LjZm65vc/v-deo.html
ROG ALLY playlist: ua-cam.com/play/PLg8ANjUNzqfPWpS6QgZTK62-QXOhr0XhF.html
If you enjoy my content Subscribe & Become a member to activate extra PERKS
Pateron Page: www.patreon.com/TECHOSAUR
Join the TECHOSAUR Community on Discord here : discord.gg/PXmJY6BP8b.
you can seek technical assistance, exchange ideas and experiences, relax, share memes, make video request and most importanly feel at home
I appreciate the time you put into this. I know the time that went into benchmarking all those and am thankful.
Thanks, yes, it is time-consuming!
But it's worth it when others see which is the best for them. I have no sponsoring with any of those third-party black covers
I love to find a way to cool electronics stuff
We share this interest!
Brilliant work brother. subbed and liked!
thanks 🫶
i used a cell phone cooler also....loved the mod!!!
do you think it’s possible to use the jsaux heatsink with the handhelddiy backplate? I want the benefit of the heatsink but the white backplate of the handhelddiy one as well as the kickstand
Unfortunately, the heatsink is customized to work only with the JSaux backplate. It doesn't work, even on the original, because of the cuts they've made that only theirs has, and it goes right in place
Is there a thermal compound or pads between the big heat sink and the allys? I feel like that that could make a difference to cooling if that hasnt been done
Yes, the heatsink of the jsaux Vents has a thermal pad, and it's shaped to make contact with the heatsink and retainer
The upside-down sticker is bugging me.
Actually I thought it was wrong, but look at the website they have in the same way 🤣
Do you know if the heatsink is compatible with the 2280 nvme adapter with big SSDs?
It's not
Have you considered testing the jsaux heat sink with the handheld diy back plate ?
I just tried it, and it's not possible to put that heatsink on the HandheldDIY because it has some plastics that get in the way, so it doesn't even close. The JSAUX has a lot of empty space in the middle
I made a short clip if you would like to see it.
drive.google.com/file/d/1-X9i6qQtENhH_UGzpo1CZLGv5E8REQog/view?usp=drivesdk
You are the only one who said Jsaux Vent is colder than handhelddiy (as far i watched YT)
How come only a backplate without sitting on active cooling can make such impact? Almost 20°
I'm not a thermal engineer, but passive cooling can do a lot.
Just like with SSD drives, when you install a high-quality heatsink on it, it reduces temperatures by half. This heatsink manages to cover all the heat generated that conveniently gets carried away by the ALLY two active fans.
Just by having a dense heatsink that covers the spot that generates heat to hold as much and then direct it away to the fans, it works well.
I'm not an expert in this field, but I'm showing you the results I got, and in my humble opinion, this heatsink is the best way to cool the ALLY while looking nice and not having a protruding heatsink out of the back cover.
I've tested both backplates, and the HandheldDIY backplate outperforms the JSAUX. The JSAUX performs better on loads up to 8 minutes long at 30W, but once the JSAUX heatsink gets heat-soaked, the heat has no way to escape the aluminum chassis. I did 1 hour of gaming on each setup at 30W with a fixed fan speed, and the HandheldDIY backplate finished 6 degrees cooler.
i really appreciate your video, but i need to know if a can put the heatsink of jsaux to the backplate original (the white).
I have the idea to buy the jsaux heatsink and cut the area for the sdd, because the temps of those components fluc diferent
I think you will need to modify the original backplate to make it fit, as its many plastics will block it. The jsaux cover is made with the intention of going in and making contact with the cooling system of the ally. The original one has some plastics that will prevent this, but if you can trim them, it should work.
Can i install the Jsaux heatsink with an 2280 ssd?
Without the heatsink
I feel it’s stupid and dangerous to spread the huge amount of heat from the main heat pipe to the ssd. Even when cooling together you can’t warranty it’ll be cooler than leave it alone. Why make it also suffer the constant high heat while it normally can be cool
My SSD normally runs too hot. Without any cooling, it can reach over 80°C.
It depends on the model and maximum speeds.
useless