I would be sad to see you trade in your overland for this unit. I was really excited to see that you got one and excited to see if you had some ideas on how to reduce the heat since I have the same machine, the gray version, and it does get hot and I haven't seen any content really on how to reduce/fix the problem. I've found only one video from a dude in Australia i believe who touches on the subject and shows some of what he did and some other guy from the states i think who added more heat shield to his unit but that's about it. I know you do some really cool stuff on here and it'd be awesome to see more content on the overland and what you'd do with it but i wouldn't blame you for trading it in. That 950 is a sweet looking unit.
No worries we are going to do all of that. And after it’s built we may sell it. Haven’t completely made up my mind yet. But we are going to make content with it first.
Do you know what he used to mount his lightbar? Did he bolt through the roof or go to the front of the cage? Love how it mounts. Did you wire to the accesory bar under the hood?
@R.N.GPerformance i love it so far,,,planning on getting one of your clutch likts and id like to figure out how to install turn signals and a light bar without butchering my wiring harness
Any idea how he mounted his light bar? Did he fab those brackets himself or buy them? I have the exact same light bar but haven't installed it yet as I don't want to drill holes in my roof...
Hey brother, sorry if this has been answered already, but on the 950, can you install a plow mount underneath or only on the front? I have one i want to move over from and old ATV but all I'm seeing are these front mount kits.
@R.N.GPerformance shifter is out...messed up clutch..which is trash from factory anyhow ...they knew clutches was problem and still put them in the 2023s
Another great job RNG! That 950 is sweet and he already has all the goodies on it. Nice trailer too!
Thank you 🙏. Yes sir he is set up good to go.
I sat in a Gen II 800 at dealer, I would have to put at least 3", prolly 4" lift on the seat to be able to see over the steering wheel.
I’m glad you brought your wife out to experience the smoothness. I like you, but I trust her opinions too.
💯 💯 she knows lol.
LOL Gary!
Awesome machine
Absolutely agree 💯
I would be sad to see you trade in your overland for this unit. I was really excited to see that you got one and excited to see if you had some ideas on how to reduce the heat since I have the same machine, the gray version, and it does get hot and I haven't seen any content really on how to reduce/fix the problem. I've found only one video from a dude in Australia i believe who touches on the subject and shows some of what he did and some other guy from the states i think who added more heat shield to his unit but that's about it. I know you do some really cool stuff on here and it'd be awesome to see more content on the overland and what you'd do with it but i wouldn't blame you for trading it in. That 950 is a sweet looking unit.
No worries we are going to do all of that. And after it’s built we may sell it. Haven’t completely made up my mind yet. But we are going to make content with it first.
I just picked up a 2023 CForce 500.
Heck yes. Nice bike there man.
When should I do the first oil change? I’m also thinking about changing the coolant to something better also.
my buddy just got one he loves it
It’s a beast for sure
Have the exact same machine. Much more refined! Stock clutching is pretty dang smooth. Will there be video of the turn signal wiring?
I agree it was smooth stock. But even smoother with my kit for sure. I’ve done it before on other zforce it’s identical really.
Really like the styling on this would like to have one
Me too for sure.
Get one gen1 vs gen2 should be a great video
Do you know what he used to mount his lightbar? Did he bolt through the roof or go to the front of the cage? Love how it mounts. Did you wire to the accesory bar under the hood?
I’m not too sure honestly buddy I don’t remember. Think he ran it off that bar.
Bro that’s clocked to B2 😱 I might have to move to B2 seeing that launch! Nice work man
💯 💯 it snatches for sure. Thank you 🙏
@@R.N.GPerformance for sure
i just got one of these machines a few days ago, did you do a video of the upgrades you did to this machine?
I didn’t unfortunately my friend. Awesome machine tho
@R.N.GPerformance i love it so far,,,planning on getting one of your clutch likts and id like to figure out how to install turn signals and a light bar without butchering my wiring harness
Did you do front turn lights also? If so what did you use for lights?
Nope. The stock ones work.
Will cf moto release a factory heater for the 23 960 sport ? Also are the side windows the same for the 800 trail 950 trail and the 950 sport ?
I’m not sure
Bro that’s a nice Cforce!! Manifesting that it comes into your life really soon hahah! Look at that beauty! ❤️🥹😊
Heck yes 🙌 💯
I don't know if I could do a S×S been riding ATV for so many years it sure looks comfortable but I gust love my ATV's
No doubt.
Can we get the info on those rear turn signals please
I’ll give you a link buddy. amzn.to/3PhIHLg
Thank you sir!!
Any idea how he mounted his light bar? Did he fab those brackets himself or buy them? I have the exact same light bar but haven't installed it yet as I don't want to drill holes in my roof...
I see a 950 coming to your garage very soon..lol
If Mrs RNG has it her way lol. I told her I can’t afford both our habits 😂
Any idea if the 2024 gen2 suspension is better then 2023? I heard the 24 model some have ebreak and better suspension?
It would be the same.
@@R.N.GPerformance Good to know, I'll be pulling the trigger on a 23 model then. I'll be ordering your ebreak set up soon 💯✔️
I told you my 950 sport it's worth the 17k out door at pro core there nice
Idk about being worth 17k but they are definitely 14k nice lol. Very nice unit for sure.
@@R.N.GPerformance lol ya
I’d love to bring out my 800 trail gen 2 an let you mess with it an tune it
Heck yeah.
🤔🤔🤔
did we just hear you say you want a spaceship lol
Yeah but this one isn’t ugly like the other thing nasa created with the aliens 😂 👽
You have an awesome wife so understanding of what makes us tick
Did you change the Helix as well?
Yes. Primary kit. SRM3 helix. Clocked to B2 with stock secondary spring. Www.rngperformance.net
I want one but I’m going to loose on the trade in 2021 zforce 800 ex with 600 miles
No doubt brother
I noticed my 23 950EX stock clutch engagement was pretty smooth as well, I did install your clutch kit, not much difference.
His was a pretty big difference. Specially with power gain too. It woke it up big time. Wasn’t bad before but a huge improvement over all.
Hey brother, sorry if this has been answered already, but on the 950, can you install a plow mount underneath or only on the front? I have one i want to move over from and old ATV but all I'm seeing are these front mount kits.
You could if you fab it up to fit.
@@R.N.GPerformance So for the average joe with zero fab skills I'm outta luck lol damn
What was it clocked to originally? Did you leave it in B2? Or change it to B2? Just curious for when my friend gets his kit for his gen2.
Stock is b1. We moved it to b2
Is this the new cfmoto 950 ho ex?
Yes. It’s beast too.
I think you need a bigger machine to carry all that dead weight! 🤪
Naaaaaa
I hate my cfmoto.uforce 1000
Yikes. Why?
@R.N.GPerformance shifter is out...messed up clutch..which is trash from factory anyhow ...they knew clutches was problem and still put them in the 2023s