Ducati Slipper Clutch Installation

I install a K-Bike Slipper Clutch in my 2000 Ducati Monster ie S.
K-BIke Slipper Available from:
stores.ebay.com/USED-DUCATI-PARTS
or see the Facebook group: USED DUCATI PARTS
You can Message Nick from this group. He was super helpful.
Here's an excellent blog on a slipper installation:
bitsabike.blogspot.com/ scroll down to the slipper clutch install guide.
The clutch holding tool can be found at:
thomasperformanceparts.com
I also referenced LT Snyder's Maintenance and Modification Guide:
desmotimes.com/index.html

[@isaiahcortez799]

Liked and saved for later when I have money, thanks for the vid!

[@mwong0919]

Awesome video, will save for future reference.

[@mikaditanzania6153]

Great vid! Thanks.

[@veenk]

Thank you for this! The diagram that came with the clutch was pretty confusing...

[@gianonegang6075]

Would you be able to walk me through the problem with this ducati 1000 ds 2006 I just bought

[@qomomoko]

looks great!!! Thanks for Video. How come you went with a Design with a spyder spring vs other? Same bike I have, 2002 S4. I am comparing EVER/Ducabike/K bike and see what else..

[@ctadams21]

I was not racing this bike, only commuting so I honestly did not do a ton of research into the type of spring it came with. I currently have 45,000 miles on the bike and (18k on the clutch) and no issues other than its a bit louder now :)

[@WillfulThinker]

Thanks a lot for this video. Did you choose the K-Bike brand over other compatible slippers for a particular functional/performance reason, or was it strictly on price? What are the differences between slipper clutches?

[@ctadams21]

I chose K-BIke because the price was very attractive and the vendor (Black Label Meccanica) was very trustworthy, even helped me with some tech questions. I mostly commute on this bike but I like that the slipper lets me downshift quickly in traffic without rear wheel lock up

[@mickeyriderph3143]

Thanks for the video hope you can direct me to the vendor for the clutch parts you installed. I have a S4 Monster

[@ctadams21]

I used a K-Bike slipper clutch from Black Label Meccanica

[@YaceYoung]

I have a brand new k bike slipper on my 1098 and like if even over rev the bike above 3k rpm it goes ERR JERK like grinding like a tractor, like I’ve had 15 bikes and none of them have been so sensitive to get into gear. Any ideas why it’s like this? Thanks

[@ctadams21]

Not 100% sure why that would happen but They are easy to take apart and inspect. Once it’s out you should check the stack height to make sure it’s in spec.Also make sure the concave steel plate is facing the correct direction. Good luck!

[@Havoc7991s]

My spring retainer kit came with shims. My 09 Monster 1100 is a street machine. Do I only need one set of shims?

[@ctadams21]

I'm sorry, I'm not sure on that model.....

[@famkevergauwen4278]

Hello, did you put grease on the little balls or does the balls work perfect without?

[@ctadams21]

Famke Vergauwen Hello! I did put a small amount on there when first assembled although I’m sure it’s all gone by now.

[@Vasilii_bnr34]

I liked it =)

[@chfung1175]

HI
SOMEONE PLEASE HELP ME .
DRY CLUCTH CAN USE ON DUCATI V2. ?
THANKS .
KURURU .

[@ctadams21]

black-label-meccanica.myshopify.com/

[@parales03]

This will be the same for a 06 Ducati 999 right?

[@ctadams21]

Should be very similar

[@parales03]

@@ctadams21 did you ever get a weird grind sound when taking off on 1st gear. I rechecked mine and I keep having this sound. Are you giving it lots of throttle on take off? I contacted kbike and still no response. It almost sounds like the metal balls are going up the ramp or what not. I rechecked and everything looked good. It’s only on first gear.

[@ctadams21]

@@parales03 that’s odd, I have not had that issue and no, I don’t have to give it extra throttle to take off although I do get a little bit of low speed chatter until the revs come up a bit

[@parales03]

@@ctadams21 hey did you get a kbike rod to go with the clutch.

[@ctadams21]

@@parales03 I did not