2 ways to drill door cylinder lock.
Вставка
- Опубліковано 9 лип 2020
- Only attack or unlock door, that you own or for which you have the explicit permission by the owner.
How to drill the door cylinder lock, when lost the keys to the house. You need to get a drillmachina, drill with a diameter of 6 mm. It's good to have a punch, a hammer and a piece of metal. The door lock company can also drill the door insert. It will be much cheaper to do it yourself. Buying a new insert for 15 $. You can ream the insert in the door on the property you own. Remember that if you have rented a property to someone else, you must not drill the insert without a court order despite being the owner. I invite you to a movie about how I opened the closed door. - Навчання та стиль
Thanks for this incredible video. I've been locked out of my house for weeks
🤔
Lucky FreezerSIG posted this video or you would have been locked out for the rest of your life
Wow what battery do you have on your phone lol
"my house"
@@zaidenkuzainer ahahha
Hay man ! thank you very much for sharing this idea. bedroom door locked and keys weren't available. this idea works. i have done on my own.
Man! You are the best! Thank you
I humbly thank you, kind sir! Worked perfectly. I must note I went for the keyhole itself with a larger drill bit at first.The lower second drill finished the job with whatever pieces were left, so there was nothing to pull out.
I'm really grateful for this video, helped a lot
Thanks my brother , you just saved my weekend!!!
Works, I used a battery powered drill, but because of the lock size I have used a smaller heads, you need though a small tool to pull out the springs. The safety goggles are also a must
I just opened my stuck lock like this. It worked out really well. Thanks for sharing
Wonderfull, i did it myself and it was a piece of cake. I finally succeeded to change my room cylinder. Thank you
This is good. I tried this one.
Fajny kanał bardzo przydatny pozdrawiam
What a brilliant video, very informative. Just bought a new house and the garden gates are locked shut- now I have a solution!
Thanks a lot you saved my day. I would say my house.
I was so upset after moving into new property the where no keys for couple of locks.
I trick worked😮
Thanks breather! i like it
Interesting video 👍
Do I need to use bigger and bigger drill bits or all one size from start to finish please?
बहुत शानदार प्रदर्शन
sick music choice!
i got a problem that the key got stuck while twisting and is not completely inside the key and i can't pull out, just the lock is not completely unlock the locker and just the key is a little bit pull out, but got stuck, i don't know if i explain well hope to get some info
Thank you very much man. It helped a lot
Thank you!!!!!
I spent ages drilling everything but the wright spot until I watched your cid
I tried it but there's some kind of anti-drill feature, I can see and feel a spring-loaded claw looking thing at the end of the keyhole. All the pins are definitely out.
Nice video, gave it a big thumbs up!!
(That song sucks though!!)
Thanks!!
🤣🤣
helpful thanks
Thanks for sharing. Where's the second way tho?
Very good
What mm drill bit should I use?
Is there a way to determine how deep the lock is if I don't have the original key? Can I use a toothpick to just feel where the keyhole ends? Is there a risk of drilling too far?
good question, i would like to know that as well !
@@matej9255 Just don't go further than 35mm and you should be fine with all euro cylinders.
Easier to grab cylinder with vice grips and just snap the whole barrel half comes out you then just need a screwdriver to reach in turn the lock most of the burglary in Europe is done in this way due to euro locks being so weak most pvc doors can be opened in seconds in this way
Excellent video
what about an anti snap lock, if you have one fitted its the same routine but will take about 3 hours each side. nothing on you tube about this.
6 months later my dumbass forgot the keys inside the apartment . Now I’m stuck in the car Lol
Thanks now everyone can found the neighbor's kids on my basement
No music pls
My thoughts exactly!
what sizes drill bits are required for this method I have a 6.5 ,would this do? and would a 8 mm sized drill bit work also or would this be too big of a hole to drill? ,also what sized screwdriver or whatever it is are you using to scrape out the pins from the drill hole under the plug?
6.5 mm works fine
8 mm could be a little bit to big
You just need any tool to get rid of the pins and the springs
And you need a tool to turn the core when finished drilling ( screwdriver works good )
Count the pins you are drilling ( most locks have 5 pins, some have 6)
When you drill too far and drill into the cam you can spin the plug but nothing happens
@@Tomatenkopf88 Thankyou for this 👍
@@Tomatenkopf88 "9
@S R yeah try drilling the first pins and pick the last ones
Ich it doesnt work you could still drill out all pins
Whats the name of the lock?
Hello, where can I buy lock cylinder marbles?
What's that tool that was used to indent the cylinder prior to drilling?
It's call a nail punch. That one looks like a spring loaded one.
What's the small tool called that you use to put inside the lock & get it to open ?
A key
He used a lock pick, because he needed a deeper thin tool - the screwdriver didn't go deep enough.
@@SamoScopom Looks like a broken key extractor. But probably a pick would work too.
And then how do you remove the drilled/broken cylinder lock to be replaced? I can't get it out
ua-cam.com/video/3JQs62VP2NM/v-deo.html
Have drilled many pin tumblers and find it better to drill just a mm over the sheer line.tumblers fall out.gentle tap on core with hammer and screwdriver.much quicker in my opinion.anyone disagree?
Does this work on uk locks
Show the photo UK locks
second way?
Two different locks.
Notice, on the one door, spinning the face of the lock did nothing and he had to insert something into the lock to get the lock body to turn and release the catch. On the other door he could turn the lock body by jamming a screwdriver into the face of the lock.
How do you get past the hardened anti drill pins?
Drill down the crack above where he drill his hole and then slowly elongate the whole downwards then you can pick the locking pins out
I'm on my 7th pin and the door still wont open :(
All pins 14 pieces and 7 springs fell out? Does the drum rotate?
Why do you have to hit it at the beginning? Can't you just drill?
He used a centre punch so that the drill started in the desired location
wtf is that music for?
My thoughts exactly!
Call a Locksmith, have them open it without a drill
Why didn't you snap it?
All my tools are inside the house 😂
My girlfriend locked herself out and called a company that appeared first on her online search. I just wished I thought of looking on UA-cam to see these great videos and save her hundreds of pounds. The individual arrived within 15 minutes in his Mercedes Benz, drilled out the Euro lock, replacing it with similar and charged her £514.80; all in 10 minutes! She's still getting over the shock of being so gullible.
probarbly called a 0800 number national call center , who deploy locksmths in the area they take 60% while the person who does the job gets 40% max, not a good idea to use national call centers who are prominent in google searches for any trade
@@applesid239 online searching can be precarious nowadays, making us vulnerable at the best of times. I faught for some reduction on the price, pestering them constantly until someone at the company acknowledged my pleas, and gave a £110 refund, which helped slightly. Thanks......
Thieves must be loving this video
Bankers don't need to pick locks, they just put politicians in place to make certain laws and loopholes 🤷♂️
Thieves tend to snap this type of lock, easier a lot quieter 👍🏻
@@TheLockLab still showing them though 😂
I drilled it and it will rotate but not unlock
Insert the plate where the key was inserted, the slot must be vertical. After switching the insert, just turn.
Why the annoying music `?
My thoughts exactly!
Just mute if it’s that annoying to you
Malo je glupo meriti dužinu burgije za bušenje cilindra spram ključa, zar ne ? Pa, da imam ključ ne bi mi trebalo to bušenje već bih ključem otključao bravu.
That a hard way
Why do people both with all these pilot holes and drilling in other spots n getting out screw drivers, u just get a thick drill piece, drill right through the key hole and you’ll hit the bolt, then with ur drill bit u can just flick the bolt backwards
Could have gone without fn music
My thoughts exactly!
Even though the pictures were easy enough to understand what you were doing, I would much rather hear what you're doing and why you're doing it instead of that obnoxious music, I had to turn the volume down the whole time
if you are a locksmith please dont do this
why?
@@FreezerSIG because thats dirty work,good locksmiths could pick simple euro locks like this
I'm not a locksmith but iv done it twice thanks
This type of content of UA-cam is exactly why I charge more once you have attempted to get through the lock yourself and cocked it up usually
Aww is that because someone is teaching others how to do something that you charge nearly 280% more than your actual working costs, to do? What, you charge say £165 to drill and change a lock, when this video+a new chamber is probably gonna cost you £50 max. Shame. LOL
Hes helped loads including me twice once for mum and another for a friend your just sad because a normal person can do the job you charge loads for
Nah, these guys make most of their money working for scum-bag bailiffs or utility companies forcing entry. Most of the time they destroy the lock without gaining access, especially if I've been asked to secure the doors and locks beforehand. Not one locksmith has been able to pick, drill, snap or bump a lock I've prepared. It's fun watching them try though. The frustration they display when they think they've drilled/picked it and the cylinder still won't turn is so satisfying. And even if they did manage to get through the lock (which none yet have) they still wouldn't be able to open the door as I install wireless dead bolts on the inside that need a key-fob to retract. On PVC doors I install a similar wireless device that prevents the handle from being pushed down so the door can't be opened. One locksmith actually suffered a bad facial injury from a snapping drill bit and the clown actually tried to sue the homeowner for it. My words to him would have been simple, "If you didn't work for scum, it wouldn't have happened".
@@spudhead169 you obviously don't pay utility bills or rent. Scrounger lol. Proper locksmiths pick locks first. Without people like you their wouldn't be bailiffs lol
@@MoroccanAnwar "THERE wouldn't be bailiffs." Your wild assumptions are comically inaccurate. But if attacking me makes you feel superior go right ahead and continue, I really don't mind.
that bloody music was so annoying
My thoughts exactly!
It's a wrong way, You can still used it no need to drill and replace it again. No no no
This guy is clueless that's not how you drill out locks he was lucky they were low security cylinders.
There is a much easier way to do this.
No drilling required and very fast method.
Search UA-cam.