Centurion D5/D3 Gate Motor Basic Info. D.I.Y- more videos on chenturion on my channel
Вставка
- Опубліковано 6 жов 2024
- Centurion gate motor basic D.I.Y. if you want to do it yourself.
our website - paseelectronics.wozaonline.co.za
remember the new videos on centurion is on my channel now
Thanks so much. This info will at least save me the cost of a "call out" Most grateful indeed.
Hi Blade, thank you very much for this video. I hear the click-click-click sound, and following your advice I checked the fuse near the relays. I will replace it now. Please keep posting new videos, I appreciate them!
Hello Blade
Thanks for the valuable info on the Centurion gate motor systems.
I have had a look at the 5 videos and I will now see if I I can get my gate going again.
Thanks again and keep streaming.
Plz make more of these vids .
Awesome thanks Blade 👌😎🙏🏻💯
Now I know which fuse is which, thank you.... it would have been very valuable if you mention the fuse ratings I need to buy to replace them.
Mar, I found a manual online with schematics. The master fuse is 16A, the auxiliary fuse and the light fuse both say '3A fast blow'. I hope this helps future visitors.
Hello mark. Will keep that in mind for the next video
Hi, Blade. Any more Videos on this Centurion D5 Motor, please? Thank You. George.
On the last note where you can wire a light to the motor . If the light is getting a neutral from the PCB board, where would the light get its live from ?
Hi Blade, dankie vir die fliek! i think the motor fuse has blown, what type of fuse must replace it with?
Hi blade. My set light on the d3 d5 centurion gate motor stays lit, how do I factory default it or get the light to go off
good teclonogy. l luck it.
Good
Hi Blade,thanks for the informative videos!I have a problem on my centurion d5-v1 motor-When I press my remote to open the gate,I get one beep only from the pcb,I tested the battery and got 13v,and the fuses are all working-Any advice or help will be much appreciated.
Hi Blade. Do you have any videos on programming an E.T. Blu remote to the Centurion D5 motor. I had a new E.T. garage motor installed recently and now want to use the same remote for my motor gate, instead of two different remotes.
Hi Blade, thank you for DIY session. I'm have challenge, I have to get close to the gate for the remote to open the gate, how do extend the range of my remote? Please help
GOOD EVEN THANK YOU TO HELP ME THE GATE ENGINE BOARD SHOWS THE FOLLOWING PROBLEM
WHEN I TURN ON THE COMMAND SHE TURNS OFF THE LIGHTS
AND DO NOT OPEN THE DOOR MOTOR D5 CENTURION
Hi , is there a video on programming remotes?
Hi
How do I set remote on gate motor which does t have pedestrian and bt pins on mother board
How can I add a remote
Hi Mark, I have install D5 EVO 3 years ago . but now my gate won 't open . on the motor screen it says battery low and is connected to my main switch. if the problem is with the battery can u advice me on how to replace it. Thank u
hello sir can you do a video on how to connect a single IRB sensor please
Board and light fuses CAN be exchangeable.
How to revert back to factory settings on the old d3 board
Hi I'm looking for a guide on the Centurion Polo Phone intercom system, mine is not working. Please help me thank you
Hi blade I want to connect my intercom so that I will open gate from inside. My intercom is commax 7" video
The mosfet on my board failed.
What is the part number for the mosfet?
Kind regards
What do i do if the test button and the relays is not working?
hi Blade, Elijah here. Mind if I call you for assistance with my d5 motor, it's closed ams won't open.
hwzt I have a problem with my motor led on da pc board is on lock can I reset it or overide it please help
it opens but doesnt close
Would like to know the amp of the different fuses??
HOW CAN I ORDER THE CONTROL CARD
martin i hope the new video solved your problem today
ɷɷɷ Heeyy Frienddssss I Have Foundddddd W0roking Online Hacck visittttt : - t.co/q8S0s6FHf2
hello jacques. call me 072 435 8348
Mine is refusing to go on programming