I have bilstein 5100 shocks 2.5” front and rear 1” blocks and one question the block will remove it?when replace all fox 2.0 performance shocks make look leveling.
We were able to fit 285/70R17's on here without too much trouble. You will need to trim back some plastic towards the edges of the inner fenders to avoid rubbing in front, but other than that they tuck in there nicely. If you adjust these coilovers up for a little more height that helps too.
We didn't adjust ours, but Fox is sometimes inconsistent with how their shocks are set coming from the factory. If you order a set you may want to call Fox and confirm what height the collar should be set at to gain 1" of lift before you have them installed.
![I Answer Your Questions About Shock Value [+ Fox's Response!]](/img/n.gif)
Do you know by any chance what the biggest tire size I can fit with a factory 17inch without any cutting what so ever with just the fox kit?
does the Fox 2.0 IFP coil over add more stiffness or helps go over pot hole/bumps better?
I have bilstein 5100 shocks 2.5” front and rear 1” blocks and one question the block will remove it?when replace all fox 2.0 performance shocks make look leveling.
What size rear fox did you get 0-1.5 or 2-3 lift?I need to buy fox 2.0 my tacoma but my tire size is 285 70 r17
Are these the standard size and heigh for the tacoma?
So the shocks are not a true 2” lift like they say and also what offset are the wheels you are running?
Has anyone achieved 3" lift eith these coilovers?
Hello buddy question will these parts # fit 2021 Tacoma’s?
Mine's a 14, but yeah, I thought the same thing
Can the coil overs be adjusted after installed and the vehicle jacked up?
We suggest you adjust these when they're off the truck but it could be done once installed.
Are sway bar relocation spacers needed?
How long did this take you
So what is the actual lift? I keep reading people aren’t getting the advertised 2 inches
They need to compress the shock and lift the rear
Sir do i need to changes the upper control arm to install 2.0 fox shock.?
The aftermarket upper control arms are not a requirement, you can run this Fox 2.0 kit with factory uppers. Hope that helps!
Tire size on this taco?
Any trouble fitting the 285 on these ?
We were able to fit 285/70R17's on here without too much trouble. You will need to trim back some plastic towards the edges of the inner fenders to avoid rubbing in front, but other than that they tuck in there nicely. If you adjust these coilovers up for a little more height that helps too.
Depending on wheel offset you will also need an alignment that will max out your caster to push your whole wheel/tire forward.
Did adjust the coilovers at all? I read online that these offer a 1 inch lift out the box, but your results indicated nearly a half inch more.
We didn't adjust ours, but Fox is sometimes inconsistent with how their shocks are set coming from the factory. If you order a set you may want to call Fox and confirm what height the collar should be set at to gain 1" of lift before you have them installed.
@@NoahStage3 thanks for the response and letting me know that they can be inconsistent with the preset heights👌🏽
What offset with the 285’s?
No Sway bar relocate needed for this setup?
Simple as you see here in the video!