Ta 152H-1 Trimaster/Dragon 1/48 Scale Model Aircraft
Вставка
- Опубліковано 28 гру 2021
- In this video I build Ta 152H-1 Trimaster/Dragon 1/48 Scale Model Aircraft in 1/48 scale.
In my country, modeling materials and equipment are getting harder and more expensive day by day. Thank you for all your support.
Support on UA-cam:
/ @scaleaton
Support on Patreon
/ scaleaton
Facebook
/ scaleatonscalemodeling
Follow me on Instagram!
/ scale.a.ton - Навчання та стиль
Happy New Year to you all guys! I hope and wish the New Year will be better than the last two years for everyone. Stay safe, keep modeling!
:D
Happy New year my friend! Inspiring work as always!! 👍👍 Greetings from Portugal!!
Happy New Year from Malaysia! Keep up the good work.
Beautiful work. FW190 certainly wasn’t Winning any beauty contests. There were a few flashes of the broken cross in there from 13 min to 16 min, hope that doesn’t upset the YT algorithm.
Happy New Year from the U.S.
Worst part of the video: “well, thanks for watching this episode!” … stunning work Rahmi … thank you for your effort to bring good content to us! You are the best
Thank you so much Daniel!
Back when these kits came out, they ALWAYS sold out immediately. The story was that Tri-Master was 3 Hasegawa employees who wanted to go out on their own. The kits were light years ahead on anything else mass produced. The plastic was great, the engraving was always fantastic, the p/e was well thought out, and workable, and the white metal (usually landing gear and exhaust stacks) was okayish (I always stuck to the plastic). The ONLY kit that I ever saw that had resin was the TA-152C, and, it was a last ditch effort. The wings were cast in resin. Mine were horrible- short shot, with huge holes, and warped to hell. BUT, that was the only kit that wasn't a home run. Some people say the 152 H is a fiddly, difficult model. It may well be in the re-box, In the tri-master boxing, it was a great build, as long as you stuck to the instructions. You have done a great job on yours! Thank you for sharing!
If you look closely, look at where the cockpit is, in relation to the wings. The DB-603 was a HUGE engine, and pushed the cockpit WAAAY back! It must have been a special challenge to get in and out of that plane, especially with a full parachute and other high altitude gear!
Actually the real plane the cockpit is in its standard place for a FW-190...the wings are new and longer the nose is stretched longer from the firewall forward and the fuselage was stretched by I think it was 10 to 14 inches between the cockpit and tail (bout the same spot you see a lot of people painting the white stripe on the body)... Kurt tank pretty much built the best version of all the FW 190s but it was expensive and so you see the Dora 9 (Dora was were they found stability issues at high altitude and made the fuselage longer) version more while very similar didn't have all the advanced features of the TA 152 Hope this bit of info helps
I thought the TA-152 used a Jumo-213.
Outstanding video and presentation.
Your airbrush work is insane !
Nice model. Don't be afraid of showing the sun-wheel. It's an essential part of the history.
This man is a pro. Excellent job.
Saludos desde Mallorca.
Feliz Navidad.🎄🍺👍
nice!!! best fight plane of the WWII
how beautiful was that plane 👏👏👏👏👏👏👏
Superb finish! Dragon kits were our holy grails back in the 90's
+1!!!😊😊
I used to make model planes as a teen back in the 1990s, used to hate painting, used to slop it on thick with a brush lol.
Randomly started watching model UA-cam channels recently and am blown away by the painting of the models, the airbrush, the techniques etc, pure art. Makes me want to take up the hobby again.
Glad to see Leo get featured lol
Excellent result 👍
Great to see what can be done with an older kit.
my god man your work is always amazing !!!!!!!!!!!!!!!
I don't think I've ever seen such a steady, accurate pair of hands ... you make it look much easier than I'm sure it is for us mere mortals!
Very pleasing to the eye your work
One of my first serious builds from the early 90's.
I have an original Trimaster kit from 1989. I think it's outstanding for it's day. The engine is superb. One day I will build it. Great show and great content!!!!!
I built this some years ago - I actually left part of the hood open since the engine provided is nice. I’m not a brilliant modeler, but it came out nice and was a lot of fun. A beautiful aircraft.
Stunning work as always. Your airbrushing is just phenomenal and such an inspiration to us mere mortals :)
Keep on modelling!
Absolutely great work, i love the worn effects much.
Great job 👏
That preshading is a masterwork.
Finding Leonardo DiCaprio was like, a where’s Waldo book lol.
As usual, a beautiful model! I love that you work „safety first“!
Excellent build...I love the techniques!
oh yes.. my favorite prop plane.. the slenderjesus
Georgous. Just georgous.. 😀😀😀😀😀
*I like how there's just a Leonardo DiCaprio edit to cover up the Swastika*
_Amazing Work Scale-a-Ton! I hope to see more of your Work, even if I have to wait Months_
OMG Rahmi! Literally you are keep building the same kits that on my stash as well! Amazing work, congratulations!
Very inspiring work as ALWAYS!!
I love the Wulf in any form and German camo is always a challenge. As always, a masterful job. Thanks for the wonderful content in 2021.
Brilliant airbrush work! Happy new year from NZ!
Once again another stunning model, Happy New Year to you and looking forward to whatever content you produce in 2022 🎉🎉👍
Wonderful work, thanks for sharing
Great work on this one! Looks amazing, definitely one of my favorities
Have a healthy and plentiful New Year!
Hello Rahmi!
This was a nice surprise! I was expecting a 1:72nd kit... 🙂
This high altitude fighter has always intrigued me with its slender, almost fragile appearance...
The late Luftwaffe camouflage is pretty challenging and I think you managed to get a good result!
Happy New Year and a better one to you too!
Thank you for your kind wishes Radu!
Very well done. Thanks for posting.
Thanks for the great work in 2021. You help develop hobby skills. Happy New Year and I hope that in the coming year you will delight us with new works!
You did an Awesome job on this build!!!!! Fantastic Work!!!!! Happy New Year to you and yours!!!!
Absolutely amazing build, one of my favourite looking ww2 fighters.🙂👍🏻
Absolutely gorgeous. Well done indeed. Happy New Year from Australia.
A fantastic build of one of my top-five favourite aircraft. Well done sir, and happy New Year when it comes. Liking the choice of music too.
Another quality one, have a great new year.
I LOVED this kit, it was a joy to build. I just got into the hobby when Tri-Master went out of business, sad day IMO. The FW-190-D9 was also a great kit!!!
Great video!
Looks fantastic!
Great vid!!!
Beautiful job that you did! It is great workmanship and perfection at its best 😊👍
Excelente trabajo!!!!!, pero el hilo de la antena debería estar estirado y tenso, no flojo.
Beautiful work!! Happy New Year to You....!
This Looks great! I love the patently made Pattern on the whole plane! And I wish you a happy new year! You inspire me much ☺️ and thank you for showing what string you used in the ending ☺️
Very nice and interessting build. Thanks for sharing this.
And a Happy and healthy new year🎉
Nicely done!
Really nice build and paint job 👍 Happy New Year 😀
A cracking build! Built a few Dragon kits in my time,I’ve still got a TA 154 in my stash. Incidentally comparable kits were the SF3D sci-fi kits,which were some of the first multi media kits to come out.
As always, amazing...!! Happy new year..!!
Superb build Sir!
Stunningly beautiful lv it awesome job
Thanks
Simply amazing
New subscriber! I love all the tiny details!
Cool one!
Very good!
Please,1/48 Kinetic Mirage IIIE
Strange looking aircraft. Never seen one before.
Lmao the little Leonardo to hide the swastika was hilarious
It's actually quite pathetic!
Fantastic!
I've got 2 of the Tri masters 1 - Later issued Ta, and a brown boxed {yes that early} still in the wrapper 190"D". The white metal is quite nice, and for a kit of that age the detail is very good. But once they became Dragon kits, I stayed away. Very nice build/paint & detail work. Congrats
Amazing build! Such a beautiful and unique aircraft so rarely seen. I would recommend annealing the PE belts for the pilots seat, it makes them much more malleable and you can form them into more interesting shapes
Merci pour cette video, vous me donnez l'envie de reprendre ma maquette trimaster de cet avion que j'avais commencé il y a quelques dizaines d'années.
*Amazing result, i think i have this kit somewhere waiting for a build ... 😉👏👏*
Happy New Year..😀
A beauty.
Magnificent!
Brilliant!!!!!!!
So great done. Looks very good! ;) All the best for You! ;)
Lovely finish. Who's that on the tailplane? 😜
Lovely build, I think some of the Dragon kits were released under the Italeri label also.
Harika olmuş Üstat. Ellerinize sağlık.
İyi seneler. :)
Teşekkürler Cem Bey, size de iyi seneler!
Elinize emeğinize sağlık çok güzel ve bilgilendirici bir video olmuş.
Nice!
良質キット👍
Beautiful work! Cool subject for sure. I must say while watching the antenna cable installation the cable was aloud to sag because of the canopy being open. Actually the cable goes through the canopy and is kept taught on a reel mechanism to take up the slack when opening the canopy...
Thanks for the feedback. Semi blown canopies doesn't have that mechanism.
@@Scaleaton Wow, I miss spoke, you are right! Thank you for answering my post and educating me... Salute!
Very nice! I have a hobbboss TA-152 in the attic it looks like it maybe a little easier to build.
The size of that propeller!
Pro tip paint at least the bottom and back sides of the engine since it is exposed (Its even this way on the real aircraft so still accurate for the rivet counters lol) Dora 9 included... It was considered a production cost and weight saving issue so deemed unnecessary to fully enclose the engine from the gear bay
Yes!
That's quite interesting because I got a Revell fw ta 152 in 1/72 at christmas. Your aircraft looks way better tho because mine has no weathering and was painted with brush only.
She is perfect
Hello mate, very nice build and technique showcase...not sure about that undercarriage color, but I am really missing brake hoses for wheels... Anyway, thanks for this video, I wish you too all the best in New Year 2022 :-)
Nice job! I have 3 questions:
First, on what pressure are you painting?
Second, how thin are paints?
Third, what is the sise of the needle of your airbrush?
Loving this build but I think the wings should have a stronger blue tone but otherwise perfect
It was beautiful work, but I have questions, such as why you filled the side fuselage. The painting of the engine, the antenna, and even the sealing of the decals. It may sound nit-picky, but I want you to know what you did. Nice model 🎉
Same for modeling stuff here in the USA- nobody is immune from Supply Chain Hell.
Looks like 3D printing is maturing just in time. Well, assuming you stocked up on resin/filament...
I think the radio antenna should be straight, it had a tension device inside the moving canopy.
Лайк! Красивая модель! Всех С Новым годом! Достижений в творчестве и хобби, осуществлений планов, и крепкого иммунитета!
Model looks great. I like that finish style. Reminds me models by Chris Wauchop, who is my favourite airplane modeler. Btw. could You tell me what camera You use for recording and pictures?