might be a little late but i had mine for 1 year now and its time to replace the bulbs. can i ask which bulbs you changed it to? if you can, maybe a link to buy it from?
Shouldn't need to remove the air ducting between the airbox and the throttle body. Just undo the 8mm bolt connecting the ducting to the airbox and slide the ducting off.
CGR Cars, Guns, and Reviews did today I changed my bulb without touching filters and nothing to unscrew, you may need to make a new video, you can change it for about 2 minutes, just need to find the rubber which covering bulb
@@ChiTownFlyDown It's actually easy, you can feel it if you will try to put your hand right there. I already forgot exactly, but believe me, it's so easy, 3 minutes and bulb is changed
@@vityaoverstars5876 ok I found the housing but my assembly of the bulb is completely differ i jus can't pull it out n change the bulb it's surrounded by a green contrapment and it's like it's attached to like a metal battery of some sort smh
You are right but in the video the two screws once you remove them the headlight just pulls straight out and the bulb is visable right away and you just place the whole assembly right back
I just bought a used 2013 ford taurus sel a couple months ago. It's my first car & I know nothing about cars:( I noticed the daytime running light on the driver side went out. I know it's a stupid question, but i'm going to ask anyway. I would have to remove the one on the passenger side and take it to an auto parts store just to see what kind of bulb it is, right? :/just lost on how to care for my first car.
Ok my front hazard/ turn signal light is off, from driver side , notice is attach different how do I remove that one? The bulb is not easy to remove lol
@@cgrreviews7220 super easy and didn’t have a single problem and your video outlined exactly what needed to be happen! i’m excited about this car, so i’ll be taking a peek at your other videos!
Why my shit don't look like that for some reason I just can't pull the bulb out it's like the bulb is attached to a metal piece with a green piece surrounding it
Now, Do you know how to change the driver turn signal? Mine have the Whelen light socket. So to change the bulb I must replace all wiring socket. How can install a regular civilian bulb. Dont need to flasher lights I guess that's what alot of police vehicles have.
@@cgrreviews7220 yes, the only way to change the bulb is to change the wiring I guess? ... unless there a trick for it to be change. The part number is EB5Z-13410-C thats how it looks.
@@pitbullchamp3459 I looked at the bulb that's weird mine did not come like that have you followed the wire to what ever connector its on there also maybe the original socket is pushed away or hidden my car had s regular bulb and socket
What’s going on brother ? I see you got that blue beautiful Police interceptor I like the color blue I just got me a 2014 Ford Taurus interceptor Sedan I noticed in your video on the side mark the little plastic vent by the fender. You have those lights actually trying to look for those to put on my Torres do you know or you can recommend me where to get them?
Great video, but you do not necessarily need to disconnect anything. If you have small enough hands you can work in the small spaces that are provided to you. Just be careful making sure you keep the new headlights free from dust and debris while working. If you are installing led bulbs, then make sure you have them positioned properly. If you keep the wiring going down at all times they should be the right way. And as always, if new bulbs dont work properly at first unhook it and flip the harness around. Got mine done in like 20 min. Take care
Yeah tht is a problem. Why do they make it so hard to counter clockwise turn out. It should be an easy pop out. They really need to fix this in future cars with somekind of pop switch. Who knows who behind you when you trying to mess with this stuff on cold nights in bad areas bc you not snug in a private garage with peace of mind to operate
Good video but if your going to make a video "how to replace", show removing old bulb and install new bulb.
Yea I can see why you say that i will keep that in mind for the next one
I found this video totally useless. It did not show how to change the bulb. It just showed where the bulbs were located. Sad
All feed back welcomed
*Doesn't even replace a bulb on a how to replace bulb video.
Says the guy that sees a video on how to remove a bulb 💡 awesome sorry I didn’t twist the bulb off on camera for you to understand
Thanks a lot for the link, I have small hands so no tools needed. Did the job in ten minutes.
Glad it helped
Nice!
Thanks for this! 2018 Taurus Limited - I was able to do this, no taking it to the mechanic.
Glad it helped
might be a little late but i had mine for 1 year now and its time to replace the bulbs. can i ask which bulbs you changed it to? if you can, maybe a link to buy it from?
Can you tell me the exact year and model car you have I’ll give you a link to the led bulbs I recommend
@@cgrreviews7220 2013 ford taurus PI
This video was great, thanks for posting! Just changed these out myself in about 20 mins!
Glad it helped you out
Mine is not twisting off
Is it also a police intercepter one as well?
Shouldn't need to remove the air ducting between the airbox and the throttle body. Just undo the 8mm bolt connecting the ducting to the airbox and slide the ducting off.
Yes that is true thank you
New cars are so stupid. Crown vics could be done in 10 seconds no tools required. I hate new cars.
I completely agree with you in that
Your forgot to mention that you should not touch the new bulbs with your fingers. You will destroy them.
Yes very true thank you
please
PQQl
Ppppppl
Shit, I thought it’s gonna be easier... thanks dude
No problem hope it helped you out
CGR Cars, Guns, and Reviews did today I changed my bulb without touching filters and nothing to unscrew, you may need to make a new video, you can change it for about 2 minutes, just need to find the rubber which covering bulb
@@vityaoverstars5876 how was you able to change bulb without unscrewing
@@ChiTownFlyDown It's actually easy, you can feel it if you will try to put your hand right there. I already forgot exactly, but believe me, it's so easy, 3 minutes and bulb is changed
@@vityaoverstars5876 ok I found the housing but my assembly of the bulb is completely differ i jus can't pull it out n change the bulb it's surrounded by a green contrapment and it's like it's attached to like a metal battery of some sort smh
What about the passenger side ? I’m assuming you don’t need to do all this ?
For one side not really a tight fit but other side it was just easier doing this
2015 Ford Interceptor Sedan LED UA-cam Video
👍
I’m glad u showed a way without taking the whole bumper off
Glad to help you out
Man what a pain in the arse. I have to replace mine… thanks for the vid. Will definitely help out.
Trust me I feel the same way about it
I sure miss the days when all you needed to do was open the hood and pull out the headlamp and put in the new one!
I completely feel where you are coming from all these new cars now you have to remove the bumper for even replacing a simple corner light 💡
Your video is pretty good except for one thing. You don't show what it's like to actually pull out the light assembly and replace the bulb.
You are right but in the video the two screws once you remove them the headlight just pulls straight out and the bulb is visable right away and you just place the whole assembly right back
I just bought a used 2013 ford taurus sel a couple months ago. It's my first car & I know nothing about cars:( I noticed the daytime running light on the driver side went out. I know it's a stupid question, but i'm going to ask anyway. I would have to remove the one on the passenger side and take it to an auto parts store just to see what kind of bulb it is, right? :/just lost on how to care for my first car.
No not a dumb question at all check this website out gives you all the bulb sizes your vehicle has www.sylvania-automotive.com/apps/vlrg-us/Vlrg/
If you visit a local parts store, they will find the right part for you using their computers. You should have a few brand options to pick from
Ok my front hazard/ turn signal light is off, from driver side , notice is attach different how do I remove that one? The bulb is not easy to remove lol
That I'm not sure
bought my 2013 taurus PI today! needed this video already off the lot 😂 thank you!!
Your welcome that's usually the first thing u change in any new car 🚗
@@cgrreviews7220 super easy and didn’t have a single problem and your video outlined exactly what needed to be happen! i’m excited about this car, so i’ll be taking a peek at your other videos!
@@carsonbristol9452 although i sold the sedan I'm close to getting a police utility basically the explorer version so much more videos coming out
Why my shit don't look like that for some reason I just can't pull the bulb out it's like the bulb is attached to a metal piece with a green piece surrounding it
You must have stock hid headlights?
I changed the bulb w/o removing anything at all.
Oh yea for sure it can be done that way but this was more for people that cant squeeze their hand in or just rather take the bumper off
how?
@@Broadcast77063 easy. My hand was able to fit lol I have a 2017
Thanks!
Your welcome
Thank you so much for your video.
No problem glad it helped you out
Now, Do you know how to change the driver turn signal? Mine have the Whelen light socket. So to change the bulb I must replace all wiring socket. How can install a regular civilian bulb. Dont need to flasher lights I guess that's what alot of police vehicles have.
So what your saying is your turn signal is a wheelen bulb?
@@cgrreviews7220 yes, the only way to change the bulb is to change the wiring I guess? ... unless there a trick for it to be change. The part number is EB5Z-13410-C thats how it looks.
Are you having this issue on the Ford Taurus police or the Ford explorer police?
@@cgrreviews7220 the sedan interceptor.
@@pitbullchamp3459 I looked at the bulb that's weird mine did not come like that have you followed the wire to what ever connector its on there also maybe the original socket is pushed away or hidden my car had s regular bulb and socket
First of all, that’s a really nice looking Taurus .... great video, very helpful 👍🍺
Thank you
What’s going on brother ? I see you got that blue beautiful Police interceptor I like the color blue I just got me a 2014 Ford Taurus interceptor Sedan I noticed in your video on the side mark the little plastic vent by the fender. You have those lights actually trying to look for those to put on my Torres do you know or you can recommend me where to get them?
Yes I got them of Amazon I can try to get a link for them if you like?
@@cgrreviews7220 yes please I would really appreciate it that thank you
@@cgrreviews7220 if u can send me the name of it or the parts number from Amazon thank you
Sure here you are 4-Pack 6 LED Amber Strobe Lights... www.amazon.com/dp/B0817T6C6H?ref=ppx_pop_mob_ap_share
Why no clip of finished product included in video?
Next time I know alot of people don't even know how to replace the regular bulb I'll be doing one on led bulb review soon
Do you have to disconnect battery first?
No for replacing the bulbs only no I did not have to disconnect the battery
Great video, but you do not necessarily need to disconnect anything. If you have small enough hands you can work in the small spaces that are provided to you. Just be careful making sure you keep the new headlights free from dust and debris while working. If you are installing led bulbs, then make sure you have them positioned properly. If you keep the wiring going down at all times they should be the right way. And as always, if new bulbs dont work properly at first unhook it and flip the harness around. Got mine done in like 20 min. Take care
Yea true if you can get your hands through it’s a easy process
Nobody has hands that small
@@Spoons7414 😂😂😂
@@Spoons7414 I do, but that's why they call me Kev the Gremlin. That and I'm always eating only at midnight. Never after or before.
My problem isn’t that stuff is in the way, my problem is that the bulb on the driver side won’t come out
Yeah tht is a problem. Why do they make it so hard to counter clockwise turn out. It should be an easy pop out. They really need to fix this in future cars with somekind of pop switch. Who knows who behind you when you trying to mess with this stuff on cold nights in bad areas bc you not snug in a private garage with peace of mind to operate
I'm sorry I wish I could help
How to replace the passenger side headlamp?
Do you want to replace the whole light assembly?