Best F@CKING video on UA-cam!! Thank you brother!! If everyone spoke and acted like you there'd be no more idiocracy in the world!!! Very helpful Thank you sir!!
while installing rear 6" lift kit when i lower the axle down it move the axle center abut 1 1/2" toward the front therefore leaf spring bolt no longer lines up. feel like i should lower front of engine/skid plate
I'm 30 year mechanic and kit is pretty basic but I adjust camber , toe and steering alot to get that factory style spec. So all you do it yourselfers you'll probably spend a day doing it
any problems with belt length I installed the same lift and it loosened the belt some i now have 1 1/2 or so inches of belt deflection should I need a shorter belt or not and if so where can I get one and how much shorter. 1999 club car carryall1 fe290 motor
Thank you for showing us how to install this lift. The music was obnoxious though. Never will I understand WHY UA-camrs who make 'teaching'(how-to) videos, find the need to play loud annoying music while doing so. We came to hear what you have to say without having to fight through the loud chaos...
anyone know what size the Heims joints are, I would rather use chrome moly heims because the heims that come with these lifts are very low grade. seen a few with this lift kit that have broke after a period of time.
Holy smokes...video was a big help BUT it's not easy as it looks. Frozen bushings, worn out ball joints, removing the ball joints, broken or worn out parts, trip to the parts department, busted knuckles and a big mess. Damn, now I know why they want $500+ for install.
It looks like some of the kits come with the wrong spacer between the leafspring and the lower control arm. Adding 1/2" longer spacer will lift it about 1.5" and get it pretty close to level. I bet if you go look, you are riding on your shocks (fully compressed) and that is a indication that this kit has some design flaws and they installed the wrong spacers.
One of the best installation videos I’ve ever seen
That lower joint is not for toe in. It is to adjust camber
Best F@CKING video on UA-cam!!
Thank you brother!! If everyone spoke and acted like you there'd be no more idiocracy in the world!!! Very helpful
Thank you sir!!
Disconnect your starter ground cable from the frame or it'll just rip out when installing the lift. Guess how I know :)
You know because you watched me do it?
Nice , simple as a pimple , thanks well explained !!!
Thanks Robert!
while installing rear 6" lift kit when i lower the axle down it move the axle center abut 1 1/2" toward the front therefore leaf spring bolt no longer lines up.
feel like i should lower front of engine/skid plate
I'm 30 year mechanic and kit is pretty basic but I adjust camber , toe and steering alot to get that factory style spec. So all you do it yourselfers you'll probably spend a day doing it
I have 23" tires with 14" wheels and kit fit good
Good video and very handy thank you !
Can I use 8" rims with 2/5 offset? I read some where that you have to use 10" rims. seems strange to me. thanks.
How would you go about adding two or 4 wheels for a ultra smooth ride
any problems with belt length I installed the same lift and it loosened the belt some i now have 1 1/2 or so inches of belt deflection should I need a shorter belt or not and if so where can I get one and how much shorter. 1999 club car carryall1 fe290 motor
thats camber not toe in...
I bought this kit for a club car precedent off amazon will the rear leaf springs still work?
Nice video. Helped out tremendously on my lift kit.
a very nice video, good enough to teach a novice how to do this
my leaf spring bolt does not line with center of axle after lowering
does this lift kit lengthen wheelbase? if so,how much?
Can this lift be combined with the torque 4wd motor kit?
I have this lift kit installed but I need about 2 more inches of clearance can anyone help me with giving my cart an extra 2 inches ?
Thank u
Thank you for showing us how to install this lift. The music was obnoxious though. Never will I understand WHY UA-camrs who make 'teaching'(how-to) videos, find the need to play loud annoying music while doing so. We came to hear what you have to say without having to fight through the loud chaos...
anyone know what size the Heims joints are, I would rather use chrome moly heims because the heims that come with these lifts are very low grade. seen a few with this lift kit that have broke after a period of time.
Chip Truitt
I have same problem this is the second one that has broken! They are poor quality!
VERY HELPFUL YOUR AWSOME
I know this is old as hell but did anyone else notice the tie rod rubbing the crap out of the frame?
This will work for a gas 96 ds?
Holy smokes...video was a big help BUT it's not easy as it looks. Frozen bushings, worn out ball joints, removing the ball joints, broken or worn out parts, trip to the parts department, busted knuckles and a big mess. Damn, now I know why they want $500+ for install.
i put polaris rzr shocks on my kit
I was just going to say we need better shocks
That’s AWSOME what model Rzr we’re the shocks from
Retain...
Good video, music annoying
rose gionomo very annoying
Pl
I lifted my cart 6in and now the back sits way higher that the front
Mine is the same way! Looks like crap. Did you find a way to fix it?
It looks like some of the kits come with the wrong spacer between the leafspring and the lower control arm. Adding 1/2" longer spacer will lift it about 1.5" and get it pretty close to level. I bet if you go look, you are riding on your shocks (fully compressed) and that is a indication that this kit has some design flaws and they installed the wrong spacers.
Would have been just as good of a video without the annoying background music.