Your suggestion worked perfectly. The “grind” setting revealed the pump weakness. Replaced the pump for $35, instead of DeLonghi wanting $250 plus shipping and waiting. Thanks again
@@yt.myworks Aber der Aufbau ist anders und ich habe Probleme, meine Türe wieder zusammenzubekommen. Der blöde Verschlussmechanismus mit der Feder hüpft die ganze Zeit wieder raus :(
Hi, i have a used delonghi magnifica that I cleaned etc., but when it turns on the display is "heating up" for 5 minutes, then it is "GENERAL ALARM" and nothing else happens. The machine seems okay with electric power on, and most things seem functional with initial motor check ( transmission moves and works okay, brew group is correct position etc) and it senses okay things like "door open" and "fill water tank." Could it be a boiler or thermofuse problem? Do you have a video that shows these kinds of issues/repair, please? (And thank you for your videos, they are very helpful and clear 🙏🏼)
Hello, great your video On mine, I have a problem of bad contact on the buttons on the front. for example, if I type a little on the top, it lights up, goes out, flashes, it's like Christmas. Do you have an idea?
Is there sort of screw thread for the grinder knob for this ESAM 3000, I find mines was very hard to remove, unlike my ECAM 22.110, all I have to do just pull the knob out very ease.
Hello, you can carefully take off the white ring, it is clipped in in three places. To do this, you have to remove the grinder. Pay attention to the left/right thread on the large screw! LG
@@yt.myworks It was my fault, what I should've describe it as adjusting knob, that plastic with grind setting number on it, and I found out that there was a screw in it, and the cap in the middle of this knob has to be remove first, but really thanks you a lot, I have watched your videos a lot and very helpful, BIG thank U:)
Unfortunately, I don't know that by heart, but I recommend buying an O-rings set on Ebay or Amazon that is suitable for the device amzn.to/3hcO9dZ or www.ebay.de/itm/155688072296?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=tVNZkM_MRdm&sssrc=4429486&ssuid=fqjNmJj7Q9S&var=&widget_ver=artemis&media=COPY
I used washing soda from the drugstore. But you can also take Cafiza, I've had good experience with it amzn.to/48gDbz8. Here are the descaling tablets I used amzn.to/48EB5sH
Turn on the machine without a brewing group, after which the transmission will move to the correct position. Now the brewing group should snap into place
Hello, the infuser of my Delonghi is stucked. How can I remove it out ? I cannot find any video for the instruction. Could please upload the video in your channel ?
Is it an ESAM or ECAM model? With an ESAM you can remove the rear cover and try to bring the transmission to the basic position manually. You have to turn the white gear in the right direction.
Świetne video. Czy masz pomysł, gdzie szukać usterki, gdy ekspres (ESAM 3200) szumi/syczy przy włączeniu? Czy to początek końca bloku grzewczego? Przy okazji czyszczenia prawie całego ekspresu wymieniłem uszczelki w tłoku i module od spieniania mleka, ale to nie tam jest problem. Skoro szumi to obstawiam, że para ucieka?
you cleaned the coffee machine beautifully and thanks for the great video. I did a similar service for my express, but after turning it on I have alarm number 7: LEDs flash in sequence: water -> tray -> exclamation mark -> descaling and so on] the brewer is installed, the door is closed, the door sensor is checked, the coffee machine is cleaned inside. What else could be causing this error?
Hi OP. I hope you see this. I got the same machine recently. The previous owner said it was working fine until it won't turn on. Where do you think I should look first for troubleshooting? The mainboard?
@@yt.myworks Looks like it's the mainboard. I used a working mainboard from another machine to troubleshoot. I'm pretty sure the mainboard can be repaired. Just have to replace a few components. Thanks for your reply and help!
Hey, thanks for that great Video! Mine has water leaking out of the water tank and dripping past the drip tray, but only if its in the machine. Already replaced the sealing ring of the tank, because I thought that was the problem, but its not. Any idea what might be the problem? Will a new tank help?
As a rule, everything should be tight again after the seal has been changed. It is important that the water tank is pushed in correctly as far as it will go.
I just picked up the same machine used and the espresso temp for a single shot is around 165 coming out of the machine (prior to hitting the cup. This seems low. The water temp coming out of the steam wand is 179. Is this low for the machine?
Trying to find o ring kit that contains sizes required in the United States? Buying them individually as Oem parts adds up quickly and I can replace entire thermoblock for 80$ I would like to just rebuild the generator vs replacing it. Thanks. Do any “kits” contain all the sizes?
@travelingmike In Europe there are matching sets with all O-rings to buy on ebay or amazon. If you can't find any seals in the US, I recommend buying a new generator.
Hi this is great! I need to clean my machine out (same as this one) but the the centre piece with the red side parts that you squeeze in to remove won't come out. It's stuck so I can't get past the first step! Any suggestions would be appreciated Thanks
Try moving the brew group up and down while pushing and pulling the two red buttons at the same time. If that doesn't work, then there is a small lever below the brew group that needs to be unlocked.
Great videos... I'm have trouble identifying the hardness of the O rings. I bought 70° hardness but they are definatly too hard. Do you know what hardness The o rings should be ? Thank you so much 😊
hello, what is the order of the wires on the door, on the day of the maintenance, I changed the switch and I think I didn't put the correct wires back, can you help me?! thank you
Hi. Thanks for the video. I have a problem with the grinder. I choose a little amount off coffee, i put 10 grammes of beans but the grinder take all beans and continues to turn with no beans (25 seconds!!). Have you an idea 💡? Thanks Delonghi esam 03.110.s
Hello. Is there a way to get rid of the plasticy clang sound when the brew unit moves along the shaft? I thought that my machine is old and makes this noise but I can hear it on your video too (10:47, 11:06). I added grease to the shaft but it did not help. Without the brew unit in place, there is no clang.
Hi, this clacking noise is normal and can always be heard. The noise comes from the brewing group, from the white plastic part that is mounted on a steel spring.
Hello ,on my perfecta cappuccino is a leak when using the Clean function on the milk frother and the water in the tray is hot .. can you please give some advice? Thank you!
Question for the experts...I have the Magnifica. It will pull single shot but not double. Pump sounds normal at start and quickly gets quiet with nothing coming out. I replaced pump with oem after 3 complete descaling procedures made no difference. Hot water and steam works good. Water comes out of espresso nozzles at startup and shutdown. I fully cleaned and lubricated the plunger assembly (even that plug and tiny hole below screen). No signs in tubing of scale buildup. I am at a loss. Any suggestions? Thanks!
@@yt.myworks Over past week after pump replacement I tried fine to coarse and regardless of grind, it still won't pull a double....and single goes slowly...
Not an expert. Sounds like you have a blockage. Maybe in the brew unit screw (pretty accessible). Maybe in the generator piston. See m.ua-cam.com/video/3QBLoTMgTec/v-deo.html
HI ! My de longhi tells me the red water sensor is flashing, as if there was no water...but instead the tank is full!! so it crashes. Do you know how to solve it? Thank you !
Hello, does the water pump become quieter? If so, the machine may be clogged and calcified. In this case, you must try to descale the machine by adding a good descaler to the water and pressing the rinse button repeatedly. Maybe the water pipes will become permeable again.
Hi man, I have Delonghi ESAM 3300, when I push the button to make a coffee it is just driping in the cup and does not leak like before. I have replaced o rings on the infuser, brew unit and cleaned everything but nothing changed it still just drips. Do you know what I should do next in order to fix it? It seems like it is clogged somewhere. Also there is no biscuit created after making coffee, but everything is crushed.
@@yt.myworks I've opened the machine 3 times and changed every o ring that I could, done 2 times descale on frothing pipe, but man you saved me I've rinsed like you showed on video and it works like a charm now. Thank you very much. Your channel is one of the best that I'm following, you are a crisfix in the coffee machine world.
Hello, I know this is an old video upload but I hope you still look at the comments. What is the size of the large o-ring inside of the boiler itself? Thanks in advance if you reply....
@Intra Flight I read all the comments from my viewers ;-) I recommend the size 34.9 / 4.2 mm. If you can't find it, you can also buy the 35/4 mm size. LG
Today low voltage to my home and machine went slow but all ok,,,, Later the voltage went back to normal and no power showing. Taken back cover off and power is going to the power board...Any ideas why not switching on and no lights, is there a reset button etc ESAM 03 Model
Unfortunately I don't know much about electronics :-( There is a reset function on this model but I don't think it helps. You have to search for it on the internet.
Подскажите после 3 эспрессо скапливается немного воды в поддоне , хотя при промывки системы я подставляю кружку , особенно заметно когда делаю молочные напитки.Нормально ли то что там немного воды скапливается в поддоне? Машина Делонги 370.95
I have a magnifica. I turned it on and opened the machine to empty the waste bin. This has faulted the machine. The front lights flash in turn and the resets don’t work. Any advice please ?
@@MrQuattrodave maybe this helps: Take out the brew group and close the service door. Press 1 and 2 cup buttons simultaneously and wait until all 4 lights are off. Put the brew group back in place.
@@yt.myworks Niby tak, ale widziałem serwisantów z których nic nie szło wycisnąć jeżeli chodzi o rady serwisowe i jakieś knify jak coś sobie uprościć. Kompletnie nie rozumiem takich ludzi. Ok, to ich chajs jest, ale przecież jak człowiek się uprze to są fora, jest yt, itd., więc sam się dowie i tak czy siak zrobi samemu...
Also das Finish beeindruckt mich jetzt aber - das gelingt uns mit Ultraschallbad nicht einmal? Wurden die Teile einfach in Waschsodawasser eingelegt? Sonst nichts?
Hi - I replaced my pump on the Delonghi Magnifica because it was not delivering water anywhere - the steamer now works but the coffee part is not delivering any liquid - any suggestions ? - I’m an amateur but I’m willing to try ! If so do you know where I can get the parts and directions to repair myself? Thank you
@@yt.myworks when I try to brew coffee no water/coffee is delivered - the machine makes a grind noise like it is should but then the fill water light comes on and nothing happens - but there is water in the tank … I know the pump is working because the steamer water works when I turn the dial - Thank you
Do you offer maintenance service? My machine needs service. It has began to leak water underneath the machine. It still makes coffee but I don’t want to buy a new one. Please advise.
Mine was leaking water underneath - turns out the boiler was leaking inside and left many calcium deposits inside the machine [hard water] which eventually created corrosion and a failure ... I think the boilers have a flaw in these machines.
Not sure if my reply is too late for you, but I have the ESAM2800 Caffe Corso machine (slight cosmetic difference, but the same inside). had the same issue - leaking water inside when making a coffee. My issue seems to have been with item 64 generator in the exploded view (see link above). Tube L-190 (item 40) was completely clogged up with coffee remnants. I disconnected that and cleaned it out, re-assembled and it is now working correctly with no leaks.
@@andyclarke6110 Thank you so much for this advice. I have bought a newer model but I like the old one better. I will try to fix it and gift my new one to my daughter.
Zapytam, może akurat będziesz znał odpowiedz 😊 moj ekspres Magnifica elegance po włączeniu do prądu wyświetla wszystkie diody, po chwili gasną i swieci tylko jedna czerwona... co może być przyczyna ?
Có thể đai ốc trục chính đã bị mòn và cụm phanh không tìm được vị trí ban đầu. Hãy thử áp dụng mẹo bảo trì từ video khác của tôi, có thể nó sẽ hữu ích: ua-cam.com/video/-BPGEyW5RVA/v-deo.html. Nếu không thì cần phải sửa chữa đường truyền.
Hello, I have made a list of the O-Rings I use. A suitable sealing set can be found in the video description. 1. Große weißer Ventilkörper DI 4,3 x SD 1,78mm → 2x 2. 30mm Hülse DI 6,0 x SD 1,78mm → 2x 3. Lange transparente Hülse DI 4,7 x SD 1,78mm → 1x DI 6,7 x SD 1,78mm → 2x 4. Anschluß-Reccord zur Heizung DI 5,0 x SD 2,0mm → 4x 5. Schlauchdichtungen DI 4,0 x SD 2,0mm → 4x 6. Brühgruppe inkl. Brühkolben DI 34,9 x SD 4,2mm → 3x
Polecam uszczelki w jakości EPDM lub VMQ. Rozmiar 1,78 mm to w DeLonghi standard który należy zachować. Średnica natomiast może minimalnie się różnić. Podane tutaj rozmiary są mocno zbliżone do oryginalnych.
Your suggestion worked perfectly. The “grind” setting revealed the pump weakness. Replaced the pump for $35, instead of DeLonghi wanting $250 plus shipping and waiting. Thanks again
Hi, this is a fantastic video - really helped me take my own machine apart and hopefully repair it
Top work, that looks amazing after the refurb
Love your work man! Did such a great job on the restoration. 👍
This is not revival. This is resurrection....💐
I love how you inspect and then drop each piece with just a little bit of Disgust for how poorly someone maintain it .
Awesome versatile Keurig and not many moving and digital parts to go bad!
Good Video, but why u don't show everything? How did you put the door back together? How do you do that with the spring in the door?
Hi, yes you're right. I've made other videos where the other steps are easier to see: ua-cam.com/video/Ww1SyIEeR8c/v-deo.htmlsi=D2kWcdHLcatmwtaK
@@yt.myworks Thnks, but that is a newer generation with another door or am i wrong? ^^
Yes, the door has a slightly different shape, but the function is the same.
@@yt.myworks Aber der Aufbau ist anders und ich habe Probleme, meine Türe wieder zusammenzubekommen. Der blöde Verschlussmechanismus mit der Feder hüpft die ganze Zeit wieder raus :(
@@hatkeinen3937 Du kannst ein Stückchen Klebeband dran machen damit die Feder an der Stelle bleibt.
What an excellent video. You're attention to detail is superb.
Just paid nearly £300 for mine. Well done...
it was ASMR during the pulling down the plastic foil :D
It would be nice to know what you were doing, Parts, chemicals etc.
Great work, thanks for posting!
Great rebuild.
Hi, i have a used delonghi magnifica that I cleaned etc., but when it turns on the display is "heating up" for 5 minutes, then it is "GENERAL ALARM" and nothing else happens. The machine seems okay with electric power on, and most things seem functional with initial motor check ( transmission moves and works okay, brew group is correct position etc) and it senses okay things like "door open" and "fill water tank." Could it be a boiler or thermofuse problem? Do you have a video that shows these kinds of issues/repair, please?
(And thank you for your videos, they are very helpful and clear 🙏🏼)
Hello, with ESAM model often the heater breaks. Of course, you also need to check the thermal fuse as well as the temperature sensor.
Tout simplement , impeccable 👍.
Pour moi , ce sera un café , s'il vous plait 😉.
👏👏👏👏
Great video. Does one need to take the side/top panels off in order to replace the small O-rings in the Generator?
The best youtuber ever!!
Bravo 😮.
How to clean the grinder? I didn't see it covered in your video. Thanks.
Great job! Just wondering - what is the powder you use to clean the parts at 2:58 in the basin - is it water and bicarb soda?
Hello, yes I use washing soda and a brush to clean.
So satisfying :)
Super,,,,,it's fantastic,,,compliment's!
Hello, great your video On mine, I have a problem of bad contact on the buttons on the front. for example, if I type a little on the top, it lights up, goes out, flashes, it's like Christmas.
Do you have an idea?
Electronics are difficult to repair. Maybe the humidity is the problem. Try to disassemble, dry, and reassemble the control panel.
Is there sort of screw thread for the grinder knob for this ESAM 3000, I find mines was very hard to remove, unlike my ECAM 22.110, all I have to do just pull the knob out very ease.
Hello, you can carefully take off the white ring, it is clipped in in three places. To do this, you have to remove the grinder. Pay attention to the left/right thread on the large screw! LG
@@yt.myworks It was my fault, what I should've describe it as adjusting knob, that plastic with grind setting number on it, and I found out that there was a screw in it, and the cap in the middle of this knob has to be remove first, but really thanks you a lot, I have watched your videos a lot and very helpful, BIG thank U:)
Awesome video... thank you... do you know the size of the O ring you used going directly into the top center of the heater?
Unfortunately, I don't know that by heart, but I recommend buying an O-rings set on Ebay or Amazon that is suitable for the device amzn.to/3hcO9dZ or www.ebay.de/itm/155688072296?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=tVNZkM_MRdm&sssrc=4429486&ssuid=fqjNmJj7Q9S&var=&widget_ver=artemis&media=COPY
What was the gel used on the o-ring at the 12 min mark?
food-safe grease like this one: amzn.to/3N37Qpu or amzn.to/3ua8AjL
👌👌👌👏👏👏 hattssoff 😊
Which kind of cleaning or descaling stuff did you use in this video?
I used washing soda from the drugstore. But you can also take Cafiza, I've had good experience with it amzn.to/48gDbz8. Here are the descaling tablets I used amzn.to/48EB5sH
Beautiful! May i ask what do you use to clean the plastic parts with? It does an awesome job! Thank you in advance!
I use warm water, washing soda and a brush. You can also use puly caff powder.
@@yt.myworks Thank you very much, i will try it out!
@@yt.myworks Works like a charm! Thank you again!
t is possible to get an exploded view of the Longhi Magnifica S. You can guide me. Thanks for your job.
outwestcoffee.com.au/wp-content/uploads/2018/01/ESAM3000.pdf
www.ereplacementparts.com/delonghi-ecam22110sb-coffee-maker-parts-c-122345_122351_205308.html?page=2
Hi. I removed my brew unit and now it won’t click back into place. Any tips?
Turn on the machine without a brewing group, after which the transmission will move to the correct position. Now the brewing group should snap into place
Hello, the infuser of my Delonghi is stucked. How can I remove it out ? I cannot find any video for the instruction. Could please upload the video in your channel ?
Is it an ESAM or ECAM model? With an ESAM you can remove the rear cover and try to bring the transmission to the basic position manually. You have to turn the white gear in the right direction.
Świetne video. Czy masz pomysł, gdzie szukać usterki, gdy ekspres (ESAM 3200) szumi/syczy przy włączeniu? Czy to początek końca bloku grzewczego? Przy okazji czyszczenia prawie całego ekspresu wymieniłem uszczelki w tłoku i module od spieniania mleka, ale to nie tam jest problem.
Skoro szumi to obstawiam, że para ucieka?
Na pewno jest tak, jak to opisałeś. Wystarczy wymienić uszczelki w górnym tłoku zaparzacza i wszystko powinno znów działać poprawnie.
you cleaned the coffee machine beautifully and thanks for the great video. I did a similar service for my express, but after turning it on I have alarm number 7: LEDs flash in sequence: water -> tray -> exclamation mark -> descaling and so on]
the brewer is installed, the door is closed, the door sensor is checked, the coffee machine is cleaned inside. What else could be causing this error?
Hi, that's hard to say, does the machine make any noise after switching it on?
Hi OP. I hope you see this. I got the same machine recently. The previous owner said it was working fine until it won't turn on. Where do you think I should look first for troubleshooting? The mainboard?
I think so, if the machine doesn't turn on at all then the fault is probably on the mainboard.
@@yt.myworks Looks like it's the mainboard. I used a working mainboard from another machine to troubleshoot. I'm pretty sure the mainboard can be repaired. Just have to replace a few components. Thanks for your reply and help!
when I make coffee with my Delonghi Magnifica, a lot of coffee goes in the tray and not my cup; weak pump? Any ideas?
set the degree of grinding a little coarser and if it gets better then the water pump is too weak.
what do you put in the cleaning water? Thank you
Washing soda from the drugstore market.
Hey, thanks for that great Video! Mine has water leaking out of the water tank and dripping past the drip tray, but only if its in the machine. Already replaced the sealing ring of the tank, because I thought that was the problem, but its not. Any idea what might be the problem? Will a new tank help?
As a rule, everything should be tight again after the seal has been changed. It is important that the water tank is pushed in correctly as far as it will go.
I just picked up the same machine used and the espresso temp for a single shot is around 165 coming out of the machine (prior to hitting the cup. This seems low. The water temp coming out of the steam wand is 179. Is this low for the machine?
Does it take a long time to heat up after switching on?
@@yt.myworks No.
I think that with this model a higher temperature is not possible. Preheating the cups is the only way.
@@yt.myworks That is what I suspect as well. Thanks for replying!
Trying to find o ring kit that contains sizes required in the United States? Buying them individually as Oem parts adds up quickly and I can replace entire thermoblock for 80$ I would like to just rebuild the generator vs replacing it. Thanks. Do any “kits” contain all the sizes?
@travelingmike In Europe there are matching sets with all O-rings to buy on ebay or amazon. If you can't find any seals in the US, I recommend buying a new generator.
Hi this is great! I need to clean my machine out (same as this one) but the the centre piece with the red side parts that you squeeze in to remove won't come out. It's stuck so I can't get past the first step!
Any suggestions would be appreciated
Thanks
Try moving the brew group up and down while pushing and pulling the two red buttons at the same time. If that doesn't work, then there is a small lever below the brew group that needs to be unlocked.
Turn the machine off by the button, not pull the plug ot
Great videos... I'm have trouble identifying the hardness of the O rings. I bought 70° hardness but they are definatly too hard.
Do you know what hardness The o rings should be ? Thank you so much 😊
Hello, the seal rings with hardness 70 are okay. You can install them without any worries.
@yt.myworks Thanks! New seals added and everything is working great. Once again fantastic videos and great advice to your followers 👏
How is the grinder set correctly again?
The grinder is set to 4-5 at the factory. You can see how to set the grinder correctly in my other video: ua-cam.com/video/Dk8_id4x7E4/v-deo.html
hello, what is the order of the wires on the door, on the day of the maintenance, I changed the switch and I think I didn't put the correct wires back, can you help me?! thank you
Hi.
Thanks for the video. I have a problem with the grinder. I choose a little amount off coffee, i put 10 grammes of beans but the grinder take all beans and continues to turn with no beans (25 seconds!!).
Have you an idea 💡? Thanks
Delonghi esam 03.110.s
I don't know this problem. Try doing a reset, maybe that will help. It could be that the power board is broken.
Hello. Is there a way to get rid of the plasticy clang sound when the brew unit moves along the shaft? I thought that my machine is old and makes this noise but I can hear it on your video too (10:47, 11:06). I added grease to the shaft but it did not help. Without the brew unit in place, there is no clang.
Hi, this clacking noise is normal and can always be heard. The noise comes from the brewing group, from the white plastic part that is mounted on a steel spring.
@@yt.myworks thank you very much for the explanation.
A dab of food safe grease on the white spring loaded latch pieces substantially quiets that sound.
Hello ,on my perfecta cappuccino is a leak when using the Clean function on the milk frother and the water in the tray is hot .. can you please give some advice?
Thank you!
There is no general answer to that, but I would first disassemble the milk froth, clean it thoroughly and check all the O-rings.
Thanks!
Question for the experts...I have the Magnifica. It will pull single shot but not double. Pump sounds normal at start and quickly gets quiet with nothing coming out. I replaced pump with oem after 3 complete descaling procedures made no difference. Hot water and steam works good. Water comes out of espresso nozzles at startup and shutdown. I fully cleaned and lubricated the plunger assembly (even that plug and tiny hole below screen). No signs in tubing of scale buildup. I am at a loss. Any suggestions? Thanks!
@David K: What level is the grinder set to? See my other video (ua-cam.com/video/Dk8_id4x7E4/v-deo.html). The grinder must not be set too finely.
@@yt.myworks Over past week after pump replacement I tried fine to coarse and regardless of grind, it still won't pull a double....and single goes slowly...
Not an expert.
Sounds like you have a blockage.
Maybe in the brew unit screw (pretty accessible).
Maybe in the generator piston. See
m.ua-cam.com/video/3QBLoTMgTec/v-deo.html
That should read screen not screw
HI ! My de longhi tells me the red water sensor is flashing, as if there was no water...but instead the tank is full!! so it crashes. Do you know how to solve it? Thank you !
Hello, does the water pump become quieter? If so, the machine may be clogged and calcified. In this case, you must try to descale the machine by adding a good descaler to the water and pressing the rinse button repeatedly. Maybe the water pipes will become permeable again.
Hi man, I have Delonghi ESAM 3300, when I push the button to make a coffee it is just driping in the cup and does not leak like before. I have replaced o rings on the infuser, brew unit and cleaned everything but nothing changed it still just drips. Do you know what I should do next in order to fix it? It seems like it is clogged somewhere. Also there is no biscuit created after making coffee, but everything is crushed.
Try to descale the machine properly. Follow my maintenance tips from minute 08;20 ua-cam.com/video/-BPGEyW5RVA/v-deo.html
@@yt.myworks I've opened the machine 3 times and changed every o ring that I could, done 2 times descale on frothing pipe, but man you saved me I've rinsed like you showed on video and it works like a charm now. Thank you very much. Your channel is one of the best that I'm following, you are a crisfix in the coffee machine world.
Can I send you one to fix for me ?
Hi my grinder doesn't work, how can I fix it?please help 😢
Hello, does the grinder stop moving at all? Is there anything else to listen to
@@yt.myworks yes ,can't hear nothing.
Hello, I know this is an old video upload but I hope you still look at the comments. What is the size of the large o-ring inside of the boiler itself? Thanks in advance if you reply....
@Intra Flight I read all the comments from my viewers ;-) I recommend the size 34.9 / 4.2 mm. If you can't find it, you can also buy the 35/4 mm size. LG
Today low voltage to my home and machine went slow but all ok,,,, Later the voltage went back to normal and no power showing. Taken back cover off and power is going to the power board...Any ideas why not switching on and no lights, is there a reset button etc ESAM 03 Model
Unfortunately I don't know much about electronics :-( There is a reset function on this model but I don't think it helps. You have to search for it on the internet.
Подскажите после 3 эспрессо скапливается немного воды в поддоне , хотя при промывки системы я подставляю кружку , особенно заметно когда делаю молочные напитки.Нормально ли то что там немного воды скапливается в поддоне? Машина Делонги 370.95
Скопление небольшого количества воды в большой плоской чаше является нормальным явлением. Напротив, в контейнере для жмыха не должно быть воды.
@@yt.myworks спасибо большое
I have a magnifica. I turned it on and opened the machine to empty the waste bin. This has faulted the machine. The front lights flash in turn and the resets don’t work. Any advice please ?
Hello MrQuattrodavde,
please check the micro switches and the position of the brewing unit. Make sure that the area of this parts is clean.
LG
myworks
@@yt.myworks is there a manual reset process, like winding the dispenser to one of the limit switches, it’s very clean inside.
@@MrQuattrodave maybe this helps:
Take out the brew group and close the service door. Press 1 and 2 cup buttons simultaneously and wait until all 4 lights are off. Put the brew group back in place.
Just tried again and it’s reset, appreciate your excellent support 😃👍👏
@
myworks
Zdradzisz tajemnicę czego używasz do rozpuszczania osadu z oleju kawy?
@PiotrK18
To nie jest tajemnica, soda oczyszczona (natron), płyn do mycia naczyń, gorąca woda i szczoteczka ;-)
@@yt.myworks
Niby tak, ale widziałem serwisantów z których nic nie szło wycisnąć jeżeli chodzi o rady serwisowe i jakieś knify jak coś sobie uprościć. Kompletnie nie rozumiem takich ludzi. Ok, to ich chajs jest, ale przecież jak człowiek się uprze to są fora, jest yt, itd., więc sam się dowie i tak czy siak zrobi samemu...
Also das Finish beeindruckt mich jetzt aber - das gelingt uns mit Ultraschallbad nicht einmal? Wurden die Teile einfach in Waschsodawasser eingelegt? Sonst nichts?
Heißwasserbad mit Soda und viel schruppen 😉
Hi - I replaced my pump on the Delonghi Magnifica because it was not delivering water anywhere - the steamer now works but the coffee part is not delivering any liquid - any suggestions ? - I’m an amateur but I’m willing to try ! If so do you know where I can get the parts and directions to repair myself? Thank you
Hello, where is the water going? Does the water pump become quieter when coffee is brewed?
@@yt.myworks when I try to brew coffee no water/coffee is delivered - the machine makes a grind noise like it is should but then the fill water light comes on and nothing happens - but there is water in the tank … I know the pump is working because the steamer water works when I turn the dial - Thank you
I think it's clogged somewhere. If the machine notices that no water is coming through then the error message lights up.
@@yt.myworks I cleaned the coffee spouts with a toothpick - can you tell me how to check the others lines ?
I’m definitely a novice at this but I’m trying ! Thank you
Nice! How did you remove the door?
You need to pull out the long piece of metal. See my video in min. 08:30.
Do you offer maintenance service? My machine needs service. It has began to leak water underneath the machine. It still makes coffee but I don’t want to buy a new one. Please advise.
Mine was leaking water underneath - turns out the boiler was leaking inside and left many calcium deposits inside the machine [hard water] which eventually created corrosion and a failure ... I think the boilers have a flaw in these machines.
@@patdarisme6626 and what did you do? Or do you know the solution? Bc mine is the same …
Did he reply if he does maintenance???
Not sure if my reply is too late for you, but I have the ESAM2800 Caffe Corso machine (slight cosmetic difference, but the same inside). had the same issue - leaking water inside when making a coffee. My issue seems to have been with item 64 generator in the exploded view (see link above). Tube L-190 (item 40) was completely clogged up with coffee remnants. I disconnected that and cleaned it out, re-assembled and it is now working correctly with no leaks.
@@andyclarke6110 Thank you so much for this advice. I have bought a newer model but I like the old one better. I will try to fix it and gift my new one to my daughter.
Hallo was hälst du von der Maschiene würde mir eventuell den gleichen kaufen....
Das ist eine gute Maschine aber ich würde lieber zu einem "ECAM" Modell greifen. Besser aufgebaut und nicht viel teurer.
@@yt.myworks Vielen Dank werde mir den ECAM 22.110.B bestellen....Lasse Abo da
Moja kobieta otworzyła zaparzacz gdy ekspres był włączony w górnej pozycji, da to się jakoś złożyć bez serwisu?
Nie do końca rozumiem w jaki sposób go otworzyła?! Proszę posłać zdjęcie jeżeli to możliwe....
Zapytam, może akurat będziesz znał odpowiedz 😊 moj ekspres Magnifica elegance po włączeniu do prądu wyświetla wszystkie diody, po chwili gasną i swieci tylko jedna czerwona... co może być przyczyna ?
Cześć, czy próbowałeś przeprowadzić "Reset" ?
4 đèn thay nhau nháy. Tôi hỏi trên google thì thấy báo đó là lỗi chưa lắp cối ép. Nhưng tôi đã tháo ra và làm. Nhưng vẫn bị nháy 4 đèn
Có thể đai ốc trục chính đã bị mòn và cụm phanh không tìm được vị trí ban đầu. Hãy thử áp dụng mẹo bảo trì từ video khác của tôi, có thể nó sẽ hữu ích: ua-cam.com/video/-BPGEyW5RVA/v-deo.html. Nếu không thì cần phải sửa chữa đường truyền.
Do you know where the model number can be found?
There is a sticker with the type designation under the machine
The lights still flash in sequence from left to right
Great video. Do you have a list of the sizes all o-rings for the brewgroup? Thanks!
Hello, I have made a list of the O-Rings I use. A suitable sealing set can be found in the video description.
1. Große weißer Ventilkörper
DI 4,3 x SD 1,78mm → 2x
2. 30mm Hülse
DI 6,0 x SD 1,78mm → 2x
3. Lange transparente Hülse
DI 4,7 x SD 1,78mm → 1x
DI 6,7 x SD 1,78mm → 2x
4. Anschluß-Reccord zur Heizung
DI 5,0 x SD 2,0mm → 4x
5. Schlauchdichtungen
DI 4,0 x SD 2,0mm → 4x
6. Brühgruppe inkl. Brühkolben
DI 34,9 x SD 4,2mm → 3x
@@yt.myworks Thanks for your reply. In your video you use 4,75mm for the 'Lange transparente Hülse' instead of 4,3mm. So is both possible?
@@og-0110 I have different suppliers but 4.75 is better 👍
To są dedykowane o-ringi czy uniwersalne? Mogą się w jakimś stopniu różnić? Np. Grubość 2 zamiast 1.78?
Polecam uszczelki w jakości EPDM lub VMQ. Rozmiar 1,78 mm to w DeLonghi standard który należy zachować. Średnica natomiast może minimalnie się różnić. Podane tutaj rozmiary są mocno zbliżone do oryginalnych.
Ktoś bardzo nie dbał, u mnie wygląda to o wiele lepiej, wiadomo części bez dostępny nie są idealne, ale kto nie smaruje ten nie pije kawy 😁
A co dokladnie smarowac oprocz zaparzacza ?
Zalecam przesmarować śrubę przekładni. Do tego nadają się smary które dedykowane są do urządzeń kuchennych.
3.45 what was that ? What kind of oil?
This is a food-grade silicone lubricant, you can get for little money on Amazon or eBay.
Fake fake