Cool build. Please include more B-roll/a little more video of the completed projects going forward. I feel like you typically do but this one seemed really quick.
Love it! I worked for a special fabrication shop in Vegas for years, we would have done the whole thing with sheet metal, 22ga and 11 ga, then wrap it in Formica to get a wood look. I would have galvanized or chrome the sheet metal. With those shapes a metal finish would be really cool looking. You can also use a combination of metal and MDF for more depth. We used to stack MDF on our metal frames. It looks amazing and I understand why you got frustrated. I am impressed you made it through the build! Most shop guys I have worked with would have given up!
I'm sure many people have mentioned this, but, use the original Gorilla Glue in your kerfs because it expands as it dries and will fill all the voids and make it really strong. Super cool project by the way.
Congratulations on the baby girl! That's so exciting! As for this build, I know it was a huge pain but dang does it look beautiful! It turned out awesome. I admit I love the AI builds. And personally I liked the fish table build even if others didn't. I can't think of a project you've done that I haven't liked to be honest. You inspire me a ton.
I appreciate the honesty and frustration on this a lot. I'v felt that on a bunch of my projects. Always love the reveal of course, but appreciated seeing that even the pros don't know what they're doing all the time. And all the guys holding the cabinet up at the end until a genius finally decided a stool and some blocks of wood could do it too was priceless. Would have loved a bit more detail on the reveal as well!
Honestly, I'm not sure what Chris does (design and Ai wise) can be taught, but I would love to see a video or two with a focus on his thought process and how he comes up with designs based on your requests John.
This is one of the coolest cabinets I have ever seen in my life. Absolute 11/10, love it!! Pity the final reveal wasn’t a full minute long 🙃 Cheers for sharing this one mate!
You could have used bendi-ply instead of using all the kerf cuts and the laminate a veneer on top. Simplifies quite a bit. Columbia forest products is a great source for this kind of material
it sure is a lot more expensive than kerf cutting some mdf. veneered bendiply is for pieces that are fully in view, front and center. curved corners on a bar, stuff like that. using it for curves in cabinetry that you're going to cover up with a face frame is kind of a waste.
It’s really not that expensive. A little less than your typical 23/32 ply. And it was painted. Put a piece of VT laminate on it and paint it. The time savings in the shop is well worth the money. I use the stuff quite regularly. Kerf cutting some like that needs to be reserved for solid wood.
@@keithpovec6462 well if time is all you have and money is tight or you just want to get some more budget tips into your prosumer level edutainment video.. it'll do
I know this had to be wayyyy more frustrating than we even saw given the time of year and your personal life, but it was obvious to everyone that it was hard and you stuck with it to finish content for us. We appreciate that and we appreciate you and your team. It looks cool and can be modified later after you’ve looked at it for a bit. It’s a fantastic version 1.0! Now sit back and enjoy your accomplishments while you and your team take time to relax with family!
Would love to see multi part series on stuff like this. Get more in depth and milk the content too. Gives you more time to spend on the project and actually show us that full process.
I this i chewed all my finger nails off while watching this...cant even imagine what it must be for you legends to build this! One of the best, if not THE BEST media center/entertainment centers ive ever seen in a long,long time!! You guys are legends of design, fun and showing what is actually doable! Congratulations of the 3rd baby, best of wishes to the mom! :D
I love it, I feel like you will have to build a funky looking conference table to have the team around. Adding led’s would be cool if they had that futuristic pulsing light effect
John, congrats on the baby girl. That’s awesome news. Hands are gonna be full. As for this build. Can we get a little reveal in the next video. Would love to see a little more of the finished product.
Fill the kerfs with fiberglass resin mixed with chopped strand and cabosil. Mix enough cabosil till it’s like peanut butter. Use a spreader to push it in to the kerfs and smooth out the curve. Oh, make sure you add the mekp before the additives.
You guys did a good job staying motivated I know the drag on can get difficult. Awesome that you brought the vision to life that's what kept me engaged in the video. Keep up the good work and congratulations on your 3rd!
I can’t explain how much I love your videos. You are so genuine and don’t give a rip. You show the mistakes and show your frustrations but then you can see the love and passion you have for the craft ! Just ordered a pair of shop shades for work! Keep grinding!
Congrats on a baby girl! Love this build. Wish I could’ve seen more of the final results in better details though. Thanks for all the great content in 2023 and looking forward to seeing what you got in 2024! Merry Christmas and happy new year John and crew. Cheers!
I would suggest using Wood Polymer Composite(WPC) boards to get dynamic curves for the shelves without kerfing. Kerfing reduces the material integrity and makes the bend fragile. WPC boards, Once heated to around 110 C, can be bent to confirm to flowing shapes and does not spring back. You can use a heat gun with foaming templates to do so. You can achieve flowing shapes too.
Congratulations on your next little baby girl arriving in 2024. Unit turned out as all your furniture does, brilliantly. My only thing is that with the white finish, you can't make out all your hard work carving out the front. Merry Christmas John to you, your staff but most importantly, your beautiful family 🎄🎅
By cutting all of those little relief cuts you weakened the board to invite failure. The bondo was a brilliant idea, however there is a plywood that is only 3 layers thick and so bends easily in one direction, it's cally bendy ply or something but it is super flexible to make curves out of but is only 3/8ths or a little thinner, perhaps 11/32nds or something. So by using two layers you can glue them in a form, best to put a thin layer of cloth in between the two layers or fiberglass if you have it and it will be super strong after it dries. It's texture is finely cracked and will need filling and sanding like any cheap plywood. I love these designs, I noticed that it modeled the spaces after bone's hollow end growth. A clever design, thinking outside of the box. Good job.
John you could not have planned the timing any better at all thank you for the laughs and the awesome shut u build! P.S. That is a badass entertainment center! Y'all should start doin building and installing those
@John_Malecki I'm a huge fan of your channel and congrats on number three!!!!! Try using AI to design a baby cradle. That would be a cool family project! Happy New Year!!!!
CONGRATULATIONS ON THE BABY GIRL AND THANKS FOR THE BABY SHOW AND SHARING AN INTIMATE MOMENT LIKE THAT !! THE WORLD IS FULL OF UGLINESS AND A NEW LIFE IS SUCH A WONDERFUL THING. AFTER ALL, AI CANNOT HAVE BABIES CAN THEY !! SO TWO"s UP TO AI FOR ONCE. AM SICK OF HEARING ABOUT AI ! !! AND OH YEAH ! !! NICE PARABOLIC TV UNIT. CANT BELIEVE THE PRICE OF MDF THOUGH? WOW ! !!
This is so cool, not only from a content standpoint. This is really a testament to your ablities as a craftsman. I can see a clients tapping into these skills to make something amazing for years to come
Kind of a lame reveal. You didn’t really give us a chance to see it up close, which is a shame because it looks pretty cool. Not sure if you’re just being dramatic when you act as if you didn’t like this project, but I much prefer watching these ideas come to life than the stupid copy cat TikTok ones or the pallet of returned tools. You and the team have amazing creative abilities and craftsmanship, show us more of that.
Kinda expected some camera panning and angles, not a single frame. Guess the editor needs coffee fully in his blood too. Cool build anyway. I would never attempt that.
@@adamnickel I don’t like leaving negative comments either, but I felt like for all the work that went into this, and for the sheer frustration evident, that even if they didn’t like it, that they could’ve given us a little more time to admire it. And I think that’s what we’re saying here. I get the feeling that it was wayyyy more work and effort than expected and the team wasn’t proud of the final result so it didn’t get its time to shine in the reveal. Or the time crunch was just too much. It happens. I think we’re all still grateful for the effort and content though. …and I hope after some time to relax and just stare at it a bit they’ll find a way to improve it so that it makes them happy and Then we get a nice reveal!
Hey I’m always encouraged by John and his team, and we didn’t say anything he would disagree with. I know life is tough and we need all the positivity we can get, but a bit of complaining is what pushes people to do their best work. This was a great build, we just missed having the bow on top.
Congratulations on your 3rd child! I loved the build, don't care much for the look myself. Good to know AI still isn't that smart. Merry Christmas and Happy New Year.
I realy love it! It is so original. Never seen anything similar. I was trying to find inspiration for my own tv stand and this hits perfect. Thanks for it.
Love the project. For your Shop Shades, think about adding some for those us us that need bifocals as we age. Love the look of the but need a 2.5 magnification pair. Just a thought. Thanks
Wow that was a ton of work. Looks great. Question - why didn't you have your CNC do the carving? Maybe the midjourney picture wasn't detailed enough to model the depth?
Stunning work, guys!!! 😃 Congrats on the baby, John & Sarah!!! 🎉 (But it's probably time to stop this. 😬) Anyway, stay safe there with your families! 🖖😊 Merry Christmas and happy new year!
can your shop shades be turned into perscription glasses? next A.I. project should be one of those ultimate all in one work benches with all the tools built into it.
Congratulations ! On the new baby Girl ! As far as ideas how about building a crafters table on a budget ? you know like those ones that fold into themselves ? I still love the series novice versus professional ... Have a Merry Christmas all of you Guys !
This is awesome. It's awesome that you and your team are willing to be uncomfortable in order to creative with the build you do. I haven't seen this much agony and frustration since your kitchen remodel
This is absolutely wild and came out beautiful! Love your content. I thought this would be a cool project to do until I realized I should probably also have that $1000 3M respirator for the mdf shaping.
Awesome project, that was a lot of work. I have an idea that I want to build myself, it is an advanced project that will challenge me beyond my skill level. I want to build a game/puzzle table, to seat 6 people, be a hexagon, have a top that raises up to store an unfinished puzzle on a piece of hard board, while using the table for something else, have 6 drawers for game pieces, cards, poker chips, ect., and 6 pull out shelfs for sorting puzzle pieces. Add drink holders, and a chess/checker board in the middle. I have not worked out a plan yet. If you are looking for a project I would love to see you do this build.
Congratulations!🎉 A baby girl!🩷 Your build turned out great! That looked like it was a tough one. I think a demonstration on how strong your safety glasses are would be a good segment in a video. You could stick a bullseye on the inside and shoot them with a BB gun. Make it a competition.. which ever one of your guys is the best shot wins a prize.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
That was a very "don't look to closely at this" ending 😂😂
Cool build. Please include more B-roll/a little more video of the completed projects going forward. I feel like you typically do but this one seemed really quick.
I can feel the stress of working for John through the phone
Love it! I worked for a special fabrication shop in Vegas for years, we would have done the whole thing with sheet metal, 22ga and 11 ga, then wrap it in Formica to get a wood look. I would have galvanized or chrome the sheet metal. With those shapes a metal finish would be really cool looking. You can also use a combination of metal and MDF for more depth. We used to stack MDF on our metal frames.
It looks amazing and I understand why you got frustrated. I am impressed you made it through the build! Most shop guys I have worked with would have given up!
That's AWESOME! I'm going to save your suggestion.
I'm sure many people have mentioned this, but, use the original Gorilla Glue in your kerfs because it expands as it dries and will fill all the voids and make it really strong. Super cool project by the way.
Congratulations on the baby girl! That's so exciting!
As for this build, I know it was a huge pain but dang does it look beautiful! It turned out awesome. I admit I love the AI builds. And personally I liked the fish table build even if others didn't. I can't think of a project you've done that I haven't liked to be honest. You inspire me a ton.
I appreciate the honesty and frustration on this a lot. I'v felt that on a bunch of my projects. Always love the reveal of course, but appreciated seeing that even the pros don't know what they're doing all the time. And all the guys holding the cabinet up at the end until a genius finally decided a stool and some blocks of wood could do it too was priceless. Would have loved a bit more detail on the reveal as well!
Honestly, I'm not sure what Chris does (design and Ai wise) can be taught, but I would love to see a video or two with a focus on his thought process and how he comes up with designs based on your requests John.
This is one of the coolest cabinets I have ever seen in my life. Absolute 11/10, love it!! Pity the final reveal wasn’t a full minute long 🙃
Cheers for sharing this one mate!
Because it wasn't good
You could have used bendi-ply instead of using all the kerf cuts and the laminate a veneer on top. Simplifies quite a bit. Columbia forest products is a great source for this kind of material
it sure is a lot more expensive than kerf cutting some mdf. veneered bendiply is for pieces that are fully in view, front and center. curved corners on a bar, stuff like that. using it for curves in cabinetry that you're going to cover up with a face frame is kind of a waste.
in Europe we have flexi plywood and flexi mdf without veneered definetly make this job much easier .@@ruben9912
It’s really not that expensive. A little less than your typical 23/32 ply. And it was painted. Put a piece of VT laminate on it and paint it. The time savings in the shop is well worth the money. I use the stuff quite regularly. Kerf cutting some like that needs to be reserved for solid wood.
@@keithpovec6462 well if time is all you have and money is tight or you just want to get some more budget tips into your prosumer level edutainment video.. it'll do
13:56 and that is why i love working with metal.
i can drop a finished part as many times as I want and can just grind it all out
I know this had to be wayyyy more frustrating than we even saw given the time of year and your personal life, but it was obvious to everyone that it was hard and you stuck with it to finish content for us. We appreciate that and we appreciate you and your team. It looks cool and can be modified later after you’ve looked at it for a bit. It’s a fantastic version 1.0! Now sit back and enjoy your accomplishments while you and your team take time to relax with family!
I think it'd be cool to have AI design a desk. Congrats on the new addition!
Congratulations for the new addition to your family! What a blessing🫶
Aww, congratulations on girl number three! I’m a third daughter and learnt all about woodworking & design from my dad. Love the final design!
Would love to see multi part series on stuff like this. Get more in depth and milk the content too. Gives you more time to spend on the project and actually show us that full process.
I this i chewed all my finger nails off while watching this...cant even imagine what it must be for you legends to build this! One of the best, if not THE BEST media center/entertainment centers ive ever seen in a long,long time!! You guys are legends of design, fun and showing what is actually doable!
Congratulations of the 3rd baby, best of wishes to the mom! :D
Now I want to see a "parabolic TV console unit center" That would be super interesting.
I love it, I feel like you will have to build a funky looking conference table to have the team around. Adding led’s would be cool if they had that futuristic pulsing light effect
John, congrats on the baby girl. That’s awesome news. Hands are gonna be full.
As for this build. Can we get a little reveal in the next video. Would love to see a little more of the finished product.
@12:29 lol that was super! Great project!
Fill the kerfs with fiberglass resin mixed with chopped strand and cabosil. Mix enough cabosil till it’s like peanut butter. Use a spreader to push it in to the kerfs and smooth out the curve. Oh, make sure you add the mekp before the additives.
You guys did a good job staying motivated I know the drag on can get difficult. Awesome that you brought the vision to life that's what kept me engaged in the video. Keep up the good work and congratulations on your 3rd!
Congratulations on the baby . The entertainment center is awesome, keep up the great work and God Bless you guys and your families. ✌️ 😊👍🙏🏼
I can’t explain how much I love your videos. You are so genuine and don’t give a rip. You show the mistakes and show your frustrations but then you can see the love and passion you have for the craft ! Just ordered a pair of shop shades for work! Keep grinding!
I also told my wife that what I want to be when I grow up is to work in your shop with all the guys!
Congrats on a baby girl! Love this build. Wish I could’ve seen more of the final results in better details though. Thanks for all the great content in 2023 and looking forward to seeing what you got in 2024! Merry Christmas and happy new year John and crew. Cheers!
I would suggest using Wood Polymer Composite(WPC) boards to get dynamic curves for the shelves without kerfing. Kerfing reduces the material integrity and makes the bend fragile. WPC boards, Once heated to around 110 C, can be bent to confirm to flowing shapes and does not spring back. You can use a heat gun with foaming templates to do so. You can achieve flowing shapes too.
Congratulations on your next little baby girl arriving in 2024.
Unit turned out as all your furniture does, brilliantly. My only thing is that with the white finish, you can't make out all your hard work carving out the front.
Merry Christmas John to you, your staff but most importantly, your beautiful family 🎄🎅
By cutting all of those little relief cuts you weakened the board to invite failure. The bondo was a brilliant idea, however there is a plywood that is only 3 layers thick and so bends easily in one direction, it's cally bendy ply or something but it is super flexible to make curves out of but is only 3/8ths or a little thinner, perhaps 11/32nds or something. So by using two layers you can glue them in a form, best to put a thin layer of cloth in between the two layers or fiberglass if you have it and it will be super strong after it dries. It's texture is finely cracked and will need filling and sanding like any cheap plywood. I love these designs, I noticed that it modeled the spaces after bone's hollow end growth. A clever design, thinking outside of the box. Good job.
This is very Art Nouveau looking. As a mixed media artist, I would have just used chicken wire and plaster to create the face frame. Beautiful piece!
This was insane. Builds are getting tougher for sure! Well done.
12:24 the whole time I was thinking BONDO!! Thanks Sam!
Congratulations to you & Sarah. 3 beautiful baby girls.
dang it's rare to find an awesome UA-cam like this one
John you could not have planned the timing any better at all thank you for the laughs and the awesome shut u build!
P.S. That is a badass entertainment center! Y'all should start doin building and installing those
Congratulation on the baby! I imagine you guys spend a lot of time in there so making it nice is definitely worth it in the end!
IT looks badass!! Great jobs guys!! And Congratulations to you John and to your wife!
@John_Malecki I'm a huge fan of your channel and congrats on number three!!!!! Try using AI to design a baby cradle. That would be a cool family project! Happy New Year!!!!
Holy crap. John I've watched your channel for years. This may be the most complicated build yet. You are a wood God.
Absolutely awesome, Congratulations on number 3
This turned out so cool!
Congratulations to you and your wife ❤ hope you, your beautiful family, and everybody have a wonderful Christmas 🎄
Amazing build... Congratulations on the entertainment center and the new girl!!! 🙂
Cracks me up how often I hear John say “I don’t know what I’m doing” when he’s doing a better job than most people could lol
CONGRATULATIONS ON THE BABY GIRL AND THANKS FOR THE BABY SHOW AND SHARING AN INTIMATE MOMENT LIKE THAT !!
THE WORLD IS FULL OF UGLINESS AND A NEW LIFE IS SUCH A WONDERFUL THING.
AFTER ALL, AI CANNOT HAVE BABIES CAN THEY !! SO TWO"s UP TO AI FOR ONCE.
AM SICK OF HEARING ABOUT AI ! !!
AND OH YEAH ! !! NICE PARABOLIC TV UNIT. CANT BELIEVE THE PRICE OF MDF THOUGH? WOW ! !!
Dude, super cool project and looks amazing. Even though it wasn't 100% the way you wanted it, you learned and improved with every mistake.
Good job and congratulations on the baby girl!
This is so cool, not only from a content standpoint. This is really a testament to your ablities as a craftsman. I can see a clients tapping into these skills to make something amazing for years to come
Congratulations on kiddo number 3! May she be healthy and happy! Merry Christmas ya all
Kind of a lame reveal. You didn’t really give us a chance to see it up close, which is a shame because it looks pretty cool. Not sure if you’re just being dramatic when you act as if you didn’t like this project, but I much prefer watching these ideas come to life than the stupid copy cat TikTok ones or the pallet of returned tools. You and the team have amazing creative abilities and craftsmanship, show us more of that.
Kinda expected some camera panning and angles, not a single frame. Guess the editor needs coffee fully in his blood too. Cool build anyway. I would never attempt that.
Agree what was the point of the build without the reveal
Lots of complaints from a free video…
@@adamnickel I don’t like leaving negative comments either, but I felt like for all the work that went into this, and for the sheer frustration evident, that even if they didn’t like it, that they could’ve given us a little more time to admire it. And I think that’s what we’re saying here. I get the feeling that it was wayyyy more work and effort than expected and the team wasn’t proud of the final result so it didn’t get its time to shine in the reveal. Or the time crunch was just too much. It happens. I think we’re all still grateful for the effort and content though.
…and I hope after some time to relax and just stare at it a bit they’ll find a way to improve it so that it makes them happy and Then we get a nice reveal!
Hey I’m always encouraged by John and his team, and we didn’t say anything he would disagree with. I know life is tough and we need all the positivity we can get, but a bit of complaining is what pushes people to do their best work. This was a great build, we just missed having the bow on top.
Congratulations on your growing family and your coming baby girl!
Congratulations on your 3rd child! I loved the build, don't care much for the look myself. Good to know AI still isn't that smart. Merry Christmas and Happy New Year.
Awesome! That Ai design is insane!
And congrats on the baby girl!
Looks amazing great job. Congratulations to you and your wife on the new baby 🎊🍾🎉
13:57 I felt that in my soul
CONGRATULATIONS on girl #3!!!
Top quality content yet again.... Love it
Congrats on your wife's pregnancy, hope your family the best for the future. Merry Christmas and a Happy New Year from the UK
Sick design. Congrats on the baby girl!
Congratulations for the baby girl!
So great! It has a combination Gaudi Cathedral and Hobbit House vibe to it!
I think this is a fun theme.
You're not just rewriting something AI made, you are creating a physical object which takes time and skill.
Congratulations on baby girl!!
That thing is BAD ASS!!!! And congrats
Congratulations on your daughter. Merry Christmas
Looks nice. Definitely not like out of the box. Congratulations on the baby 🎉
Absolutely Insane!
Just ordered a pair of shop shades. Currentley building up my own furniture shop in the Netherlands , specialized in midieval styles and techniques
Wonderful result thank you
I realy love it! It is so original. Never seen anything similar. I was trying to find inspiration for my own tv stand and this hits perfect. Thanks for it.
Congratulations on the new baby coming!
should be a sewing station as it looks pretty much like a sewing machine. Congrats on the baby girl!!!
Congratulations on the bew baby the console looked like a ton of work. Pretty cool in the end
Love the project. For your Shop Shades, think about adding some for those us us that need bifocals as we age. Love the look of the but need a 2.5 magnification pair. Just a thought. Thanks
Phenomenal Project!!
Wow that was a ton of work. Looks great. Question - why didn't you have your CNC do the carving? Maybe the midjourney picture wasn't detailed enough to model the depth?
looks awesome dude i love it
Congrats for your 3 Girly Girl wish you all the best of luck and Health
For the next build a kinetic sand art table would be cool!
Dude, congrats on the baby!!!
Stunning work, guys!!! 😃
Congrats on the baby, John & Sarah!!! 🎉
(But it's probably time to stop this. 😬)
Anyway, stay safe there with your families! 🖖😊
Merry Christmas and happy new year!
Gotta go until they get a boy!
can your shop shades be turned into perscription glasses? next A.I. project should be one of those ultimate all in one work benches with all the tools built into it.
Congratulations ! On the new baby Girl !
As far as ideas how about building a crafters table on a budget ? you know like those ones that fold into themselves ? I still love the series novice versus professional ... Have a Merry Christmas all of you Guys !
Wery cool!
P.S.
For curved surfaces, thin plywood is suitable, no cutting lines are needed.
Congrats on the girlie 🎉
Congrats john! I might try to build that bottom cabinet. I learn alot building modern furniture trying new techniques and wacky shapes. Nice vid!
This is awesome. It's awesome that you and your team are willing to be uncomfortable in order to creative with the build you do.
I haven't seen this much agony and frustration since your kitchen remodel
Congratulations! 🎊 🎊
10:00 Could strengthening it with a tape help bending it without snapping it?
This is absolutely wild and came out beautiful! Love your content.
I thought this would be a cool project to do until I realized I should probably also have that $1000 3M respirator for the mdf shaping.
I'm commenting 3 min into the video and I already want it!
Looks sick! Great execution
Merry Christmas guys and Happy Holidays you guys and your family and enjoy
That looks pretty awesome!! Congratulations about the new bundle of joy. You now need a hoodie that says Girl Dad!
Wow, almost at 1 million, congratulations!
That was an insane build. You should have AI design a crib now for the new baby.
let's get this to the top
Congratulations for the new addition to your family!
22:18
I was waiting for the Ross Friends meme..."Pivot, Pivot, Piiiiivot"!
Awesome project, that was a lot of work. I have an idea that I want to build myself, it is an advanced project that will challenge me beyond my skill level. I want to build a game/puzzle table, to seat 6 people, be a hexagon, have a top that raises up to store an unfinished puzzle on a piece of hard board, while using the table for something else, have 6 drawers for game pieces, cards, poker chips, ect., and 6 pull out shelfs for sorting puzzle pieces. Add drink holders, and a chess/checker board in the middle. I have not worked out a plan yet. If you are looking for a project I would love to see you do this build.
Good work, really adds to the office. Like it
Yes, finally. A new episode and I liked the fish table too, would like to see other designs if possible
Congratulations!🎉 A baby girl!🩷
Your build turned out great! That looked like it was a tough one.
I think a demonstration on how strong your safety glasses are would be a good segment in a video. You could stick a bullseye on the inside and shoot them with a BB gun. Make it a competition.. which ever one of your guys is the best shot wins a prize.