Saber Tactical Chassis for the FX Crown AirGun Installation
Вставка
- Опубліковано 15 вер 2024
- In this video we install the Saber Tactical Chassis on our MK1 FX Crown air rifle in .25 caliber.
The first part of the video covers what comes in the box when you buy the Chassis.
The second part describes how to remove the Crown action from the original laminate stock. (2:14)
The third part covers installation of the Chassis. Installation requires a mix of metric and SAE Allen wrenches. A total of six bolts are used for the installation. (7:17)
The fourth and final part of the video goes through the main features of the Chassis. (22:02)
The Chassis has so many features it’s hard to remember to mention them all. Forgotten in this video is a mention that the folding butt stock has several quick detach sling attachment points. Also forgotten but pictured several times is a 1/4 inch threaded hole in the rail that permits attachment to a standard photo tripod.
For more information about the gear seen in this video, check out these links:
Saber Tactical Chassis for FX Crown
sabertacticali...
Available at retailers worldwide
For more information about the Crown platform
fxairguns.com/
Available at retailers worldwide
Aztec Optics 5.5-25X50
utahairguns.com/
www.aztecoptic...
Neewer Carbon Fiber Tripod
www.amazon.com...
Vanguard Alta BH-300 Ball Head
www.amazon.com...
Very helpful, I have a saber crown from Utah Airguns and actually had to take it apart to install gauges, made things easier!
Glad I could help.
Hi PJ. Thanks for the video I found it very helpfull. Lee Watts put me onto this video. Thanks again. 👍
Glad it was helpful!
What a brilliant , informative video this was .
I received my chassis today and searched and this made life so easy .
👏👏👏👏👏👏
Thank very much!
Thanks for this very detailed explanation. My Crown is also one of the original ones that came into the USA. So your video will be very helpful when I take the Sabre plunge.
Awesome. Glad it helped.
Awesome job thanks
Thank you!
Looking forward to gettin* mine, very cool chassis and air rifle
We have two now on the team and can't fault them.
Awesome video brotha 👌 thanks for sharing bsafe
Thanks Chris.
Thanks again, PJ. I got my chassis delivered today so tomorrow, my plan is to get going on the installation. I am going to load your video on my computer and take it step by step. There was nothing in the box to explain how to do this (maybe Saber Tactical has something on their website, I don't know ) so your video will be my go-to source for getting it done.
Glad I can help.
Thanks super excellent video
So damn nice
It is. 100% awesome!
Is the blue stock for sale?? 😁😁
@@TheEastside47 nope. Never. But thanks for the offer!
Have to say this is the best instructional video I have ever watched. I only have one question what chassis does the FX Crown Continuum use, if you know. otherwise I will try to contact the mfg.? Again awesome video! MAN !!!! Thank You.
This Chassis will fit the original, MKII and Continuum models. Basically it's made to fit all existing Crowns.
On your blue wooden stock, did you mount the forearm picatinny rail or was it done by someone else? I’m interested on how it was mounted? Wood screws or inserts? Any pitfalls?
Thanks
A friend was able to tap holes and put in inserts. He's good at that sort of woodworking stuff and it's been perfect.
Very nice looking unit which appears to be well constructed as all the ST products I've seen are. That's the good news. The bad is it's TDH (too damn high). It's out of the range of most Crown owners at 600USD delivered. At 400 I think it would be good value. The two points I believe are lacking are 1) a cutout to enable the HS to be adjusted while in the stock. This is an obvious oversight that could easily have been incorporated with little or no effort or tooling. The second is the lack of a bench riser/stabilizer in the butt plate. This would have taken a little more engineering but at $600 bucks I would think you'd get it all. Don't get me wrong, I'd love to have one, but being a Crown guy (i have several) I have to pick and choose where my money is best spent and this piece, albeit very nice, is more a vanity piece than any type of an upgrade.
I can't speak to the business side of things as I'm not privy to things like manufacturing costs, etc. I've suggested the cut out.
By riser I'm assuming you mean some kind of monopod? They make two ($150/$250) if that's what you mean, they are pricy though!!! Should be included with this setup.
Why one could not place the AR grip block before the Crown action is placed?
Good question. It's because the grip block covers the first screw that attaches the Chassis to the action.
@@WiscAirGunners thanks for the explenation, I had to ask or my head would be grinding why this was. Hope to own a Crown MKii in a saber tactical one day, all is depending Christmas and the kindness of the Wife :).
Where did you buy the rear block for the grip, I can't find it, is it included with the chassis?
Yes it was.
Can you fine tune the hammer spring without pulling the action?
No, just like in the laminate, wood or soft-touch stocks you have to take it out to make that adjustment.
It possible to fit a 580cc bottles in that configuration? Great video 💪
I think so!
@@WiscAirGunners thanks 🇵🇷
What’s the best all around length barrel for target or hunting in the 25 cal. Crown mark ll. Thanks
Hard to go wrong with the 600. I think 700 is too long for the field.
This is off topic but I am interested in the Chassis down the road. I also have a first generation Crown (.22) 600mm before the AMP reg and can't seem to get the FPS up high enough to shoot slugs effectively like a 23 or 26gr, What is the Hammer Spring Tensioner adjuster screw? Can this increase power?
It's under the stock in front of the power wheel. You have to take the action out of the stock to make the adjustment, and yes, you will be able to up the velocity by upping regulator pressure and increasing the hammer spring pre-tension. You will sacrifice range on the power wheel when you increase pre-tension, but for slugs you will need to make the sacrifice.
thanks for the video .. is there any other position we can install the safery switch?
You can reverse it 180 degrees. Then it goes up (safe) and back (fire).
Dimana beli popor Saber technical nya bos?
Coba MKM Corp. di Jawa Barat. Mereka adalah dealer untuk DonnyFL dan mungkin bisa membantu.
So i have a brand new fx crown mk2 with saber tactical chassi. I have a problem with the safety swithch. The original was safe up and fire to the right. The saber tactical is the other way around so on fire it gets in the way of the trigger. Anyone know if there is possible to get different safety swithes from saber?
I set my down (safe) and forward (fire).
What model is the accu tac bipod?
It's the SR5-G2.
Will it fit a fx streamline
I don't think that it does.
👍👌😍
Thanks