Sweet! I thought I was the only re-purposing bastard out there...thanks for doing the hard part - my super-shelter-eco-logic is destined for my tiny home machine shop...great job! 🤙
Perfect! That's exactly what I wanted to learn, now that our Shelter Logic cover is torn-up; it lasted at least three years, so not bad but time to make it permanent. Thank you for the tutorial, screw hole mishaps and all!
Thanks for doing this video. I have a 10x10 shed and was wondering about cladding it with something strong, as I also get a lot of snow in the winter. So far I’ve been going out after the snow storms and taking the snow off with a long handled floor broom. Like you said, eventually the UV rays will ruin the cover anyway, so I want to get it done as soon as I can. I not getting any younger.🙃
Thanks for the video, David. I have a 12 x 25 and the middle has ripped from stem to stern. This is a great solution for repair and a longer lasting shelter for our boat. May I please know where you obtained the corrugated aluminum? I'm in Ontario.
Hi, thanks alot It has served me very well. We have a local Mennonite distributor where I purchased it. It was much cheaper than big box suppliers and they custom cut.
Have the screws backed out of the pipe from movement at all ? I've been thinking of doing this and maybe using PL400 or something to help hold the metal sheets to the pipes and help keep the screws from backing out. Thoughts ?
Nice easy renovation for the shelter logic. I too have done same but have a bigger one I'm thinking of cladding with milled boards. Has yours had any significant snow fall on it yet ? Great content and you've earned yourself another sub 😄
Hi there thanks alot for the sub, aswelli subbed to your channel and look forward to watching. I haven't had any heavy snow on it yet but I am installing a pole in the center just incase. My neighbor has 2 big ones and they've held up really well.
@@offgridDAVID thats great to know. We've had snow on ours before but we dont get the figures you guys get. Hoping it will be rigid enough, been watching another guy on youtube and he braced his with 3x2s or 4x2s to add some rigidity. Anyways, great content buddy and appreciate the sub.
how do you stop condensation on the ceiling? I did this and in the winter there is so much condensation dripping from the ceiling I cant keep anything dry.
Hello there. I haven't ran into than problem here but if you install a vent on front and back the airflow will likely help regulate the temperature and reduce condensing.
I have a large Quonset shop and condensation was an issue. To combat this you will need a radiant barrier on the inside, but you need an air gap of 1/2” or so between the building metal and your radiant barrier. This air pocket will regulate the temp of the metal to be more consistent stopping most of the condensation.
I did this with a harbour freight 10x17 put it on a framed floor and covered it with 8' and 12' 28ga galvanized sheets 😂 stood up to 4 northern Michigan winters
HOWdy O-G-L-a-S-P, ... I know you are already DONE drilling your HOLES through the PIPE & into your Sheet Metal WALLS ... but You could have GUARANTEED "perfection" by drilling a small "pilot-hole" from the INSIDE / OUT through the PIPE 1st & then through the Sheet Metal 🙂 ... COOP the WiSeNhEiMeR from Richmond, INDIANA ...
Sweet! I thought I was the only re-purposing bastard out there...thanks for doing the hard part - my super-shelter-eco-logic is destined for my tiny home machine shop...great job! 🤙
Haha thankyou. Heck no I repurpose where ever possible. This super logic is still as strong as it was when built I'm quite happy with it.
Perfect! That's exactly what I wanted to learn, now that our Shelter Logic cover is torn-up; it lasted at least three years, so not bad but time to make it permanent. Thank you for the tutorial, screw hole mishaps and all!
Hey thanks alot. Glad it helped. It's been up 3 winters and still going strong.
Thanks for doing this video. I have a 10x10 shed and was wondering about cladding it with something strong, as I also get a lot of snow in the winter. So far I’ve been going out after the snow storms and taking the snow off with a long handled floor broom. Like you said, eventually the UV rays will ruin the cover anyway, so I want to get it done as soon as I can. I not getting any younger.🙃
Haha no are not my friend. I put a center post in for the winter months . I had 3 ft of snow on it and help up fine. No leaks
You can add some metal studs as supports in the ceiling.
Thanks for the video, David. I have a 12 x 25 and the middle has ripped from stem to stern. This is a great solution for repair and a longer lasting shelter for our boat. May I please know where you obtained the corrugated aluminum? I'm in Ontario.
Hi, thanks alot
It has served me very well. We have a local Mennonite distributor where I purchased it. It was much cheaper than big box suppliers and they custom cut.
I could not tell the size of your shed and how many panels it took. Great job and great idea.
Hi and thankyou friend . So it's 8ft wide by 10 long. It took 7 panels at 3ft wide and 12ft long to have a foot over hang on each end.
great job, have you heard about burning the wood a little and putting used motor oil with diesel mix to keep it from rotting.
@@otrotland5377 I've researched the wood burning preservative method and believe it would work great.
Have the screws backed out of the pipe from movement at all ?
I've been thinking of doing this and maybe using PL400 or something to help hold the metal sheets to the pipes and help keep the screws from backing out.
Thoughts ?
@@steveg1122 Hello there, no they haven't at all. It's still very solid and doesn't leak. Has served me quite well
@@steveg1122 I have very high winds and heavy snow loads. Its still doing great 👍 .
Nice easy renovation for the shelter logic. I too have done same but have a bigger one I'm thinking of cladding with milled boards. Has yours had any significant snow fall on it yet ? Great content and you've earned yourself another sub 😄
Hi there thanks alot for the sub, aswelli subbed to your channel and look forward to watching. I haven't had any heavy snow on it yet but I am installing a pole in the center just incase. My neighbor has 2 big ones and they've held up really well.
@@offgridDAVID thats great to know. We've had snow on ours before but we dont get the figures you guys get. Hoping it will be rigid enough, been watching another guy on youtube and he braced his with 3x2s or 4x2s to add some rigidity. Anyways, great content buddy and appreciate the sub.
@@offgridDAVID update on how it held the snow?
@@brucewebber3412 hi. It held up great. I put a post in the center and had no movement or leaks . I was really impressed.
how do you stop condensation on the ceiling? I did this and in the winter there is so much condensation dripping from the ceiling I cant keep anything dry.
Hello there. I haven't ran into than problem here but if you install a vent on front and back the airflow will likely help regulate the temperature and reduce condensing.
I have a large Quonset shop and condensation was an issue. To combat this you will need a radiant barrier on the inside, but you need an air gap of 1/2” or so between the building metal and your radiant barrier. This air pocket will regulate the temp of the metal to be more consistent stopping most of the condensation.
Plastic on floor, gotta keep moisture out also and vents
Did you use self tappers to screw into the frame?
@@heffptbo hello 👋 yes I used 1"1/4" roofing sheet metal screws. They went in no problem.
@offgridDAVID great video..I will do this next time!
@@heffptbo Thanks for tuning in. Once the first sheets up it's smooth sailing.
Only thing I don't like are the sharp edges pointing out... I wonder if you can cut them flush and put some kind of L flashing over the corners.
My friend did that and it seemed to work fine
I did this with a harbour freight 10x17 put it on a framed floor and covered it with 8' and 12' 28ga galvanized sheets 😂 stood up to 4 northern Michigan winters
and then failed?
@@brianbailey462 no, i was referring to it had been up for 4 years. Just looked out the window still there
@@ktanner11 very cool! thx for the update
That's what I'm tok'in aboot!
You know shelter logic sells different covers at different price points. The standard one you get with it is only another 300 to replace. 4:30
“Only another 300”
Ya let me waste a week’s worth of grocery money for another shitty tarp that will die in under 6 months too
What is the best way to anchor this down?
Hi. I used 4 full sand bags ber side and it has never moved an inch. I placed them on the bottom support inside.
@@offgridDAVID Thank you.
I need to do that to mine
I'm quite impressed that after 4 years it's still working great 👍
looks epic
Thankyou
greatr build... it needs a window on the back just for light
Totally 👍
I did this same thing 12 years ago...
Good little sheds
I was going to do something like but the cost for the cover was way to high, in the $1,000.
HOWdy O-G-L-a-S-P, ...
I know you are already DONE drilling your HOLES through the PIPE & into your Sheet Metal WALLS ...
but
You could have GUARANTEED "perfection" by drilling a small "pilot-hole" from the INSIDE / OUT through the PIPE 1st & then through the Sheet Metal 🙂 ...
COOP
the WiSeNhEiMeR from Richmond, INDIANA
...
Call shelter logic. They will sell you a new tarp for that model
Ecology is pretty close to ecologic so that's probably why.
Glad you didn't get into that.....how about the price of plywood now???? FFS!!!
The world's gone mad 😠
I will never buy another one
Like a 12 year old did it
Very…subpar 😂
But hey what do I know