Audexen 7" LED Headlights with DRL Halos Installation Tutorial and Review: Jeep Wrangler JK

Поділитися
Вставка
  • Опубліковано 28 лип 2024
  • These LED Headlights from Audexen are no joke when it comes to aftermarket headlights for 2007-2018 Jeep Wrangler JKs. Let's face it, the factory halogen bulbs especially on older Jeeps do not perform well at night. These are the closest-looking headlights to Jeep's new factory LED light package. As if I haven't mentioned it enough in the video, these headlights are BRIGHT putting out 3,000 lumens on low-beam and 6,000 lumens on high-beam! I forgot to mention in the video that these are anti-flicker headlights, and the H4 to H13 adapter is included in the box so no need to buy extra adapters. You can buy just the pair of headlights on Amazon, or there is also an option to purchase the headlight/foglight combo. I'll leave the link to both down below. Thank you for watching and subscribing to our channel:)
    Audexen 7" Headlights:
    www.amazon.com/Headlights-Hea...
    Audexen 7" Headlights/Foglights Combo:
    www.amazon.com/dp/B0869LLGCC/...
    Music: "The Tide" - Russo on Artlist.io
  • Авто та транспорт

КОМЕНТАРІ • 24

  • @betweenthepines4000
    @betweenthepines4000 Рік тому +5

    I’ve had these lights for over 2 years on my JT’s. They are the best aftermarket “cheap” headlights on the market. I ran trucklite “rigid” light on my JK and they were underwhelming for the price. I don’t hesitate to recommend these lights to others.

  • @lNgemarsson
    @lNgemarsson Місяць тому

    When I was your age a car like that would be something that I only could dream of.

  • @1910FruitgumCompany
    @1910FruitgumCompany Рік тому +1

    I just installed mine on my wife's 2016 Jeep Rubicon... It had the halogen headlights.. WOW what a difference!!! She said it was like night and day...

    • @dougcoleburn1579
      @dougcoleburn1579 Рік тому

      any modifications needed? I have seen a few comments on other pages of lights being too big. Thanks

    • @1910FruitgumCompany
      @1910FruitgumCompany Рік тому

      @@dougcoleburn1579 it was pretty straight forward.. plug and play.. the DRL's had to be cut into the center line of the tirn signal as the install shows...

  • @KyleSVT
    @KyleSVT 2 роки тому +1

    Looks great. I put those in my brother in laws gladiator

  • @ericolesen846
    @ericolesen846 Рік тому

    Like the look. What product did you select for the fog lights?

  • @marcinbednarz2901
    @marcinbednarz2901 Рік тому +1

    Do I need to buy new backets to install these headlights?

  • @laurenfisher-rowing
    @laurenfisher-rowing 10 місяців тому

    I’ve spliced it, wiring looks good but no change. I still have headlights and main beam. Anyone have any ideas?

  • @franciscofernandez2576
    @franciscofernandez2576 7 місяців тому +1

    What h13 to H4 adapter are u using

  • @ryanhooker3724
    @ryanhooker3724 Рік тому

    Is your driver side low beam on the inside or the outside

  • @deckgun31
    @deckgun31 Рік тому +1

    In video, showing your installation, you connected to the center wire of the harness for the DRL. But, I didn’t see you connect the turn signal light wire. My issue is my DRL does not operate unless you turn on the headlights, or if the parking brake is set. If the parking lights are on, or the HL switch is off, the high beams are on. If I turn the HL switch all the way on, the low beams come on. And the high beams function normally when activated.
    The two additional wire connections (from the headlight harness) are wired as follows: the DRL wire for both lights is connected to a fuse tap in an accessory plug (M14) on the fuse block. The turn signal for the halo is wired to the turn signal harness.
    I want the halos to operate separately during the day, without the high beams being on all the time. Any suggestions?

    • @dougcoleburn1579
      @dougcoleburn1579 Рік тому +1

      most likely need to wire to fuse box with a key on circuit.

  • @luke2956
    @luke2956 Рік тому +3

    What year model is this jeep? I'm looking at getting a set, but I've heard that people have some trouble fitting them in the buckets in 2015 JK's, and have to make some minor adjustments with a dremel or something.

    • @jramos20
      @jramos20 7 місяців тому

      Same here. Currently installing and nobody seems to reply on all the videos I've seen lol

    • @luke2956
      @luke2956 7 місяців тому

      @@jramos20 hey man, just to let you know I installed them in my 2015 and all is fine. No modification was necessary. The retaining ring clamps them in place perfectly fine.

  • @steveb611
    @steveb611 Рік тому

    How did you get the LED ring to stay on by itself? I have a 2015 Jeep. JK it'll only stay on when it's in park. Soon as I put it into gear the headlights come on during the day with the LED ring

    • @missioncustom5415
      @missioncustom5415  Рік тому +1

      That is strange, I did not run into that problem when installing these but I tapped into the turn signal wiring so when I turn the headlight switch by the steering wheel one click (between off and headlights) just the ring lights up.

  • @user-lu3ns1nn6s
    @user-lu3ns1nn6s Рік тому

    Why does mine have a yellow and red cable for the halo ? Yours only have a yellow cable

    • @missioncustom5415
      @missioncustom5415  Рік тому

      The red cable might be there so you can use the halo as a turn signal, mine didn't have that feature.

    • @pogi103
      @pogi103 Рік тому

      @@missioncustom5415 is it possible to have that feature if I just put another cable? or no?

  • @overland_3j
    @overland_3j Рік тому +1

    does this fit on JL 2020?

    • @missioncustom5415
      @missioncustom5415  Рік тому

      Yes! The JL uses 9-inch headlights, so there is a bracket you have to purchase if you want to install these on a JL:
      www.amazon.com/Inch-Headlight-Black-Mounting-Bracket/dp/B08CJZ4R5B

    • @overland_3j
      @overland_3j Рік тому

      @@missioncustom5415 thanks man, I got it already just trying to figure out how to install the DRL