Sedge and Big D, thanks for the shout out this morning!! We are proud to have earned a place in the legend’s shop…. But Big D looked a little left out, anyone think we should show him some love with a couple of pieces of kit for his shop?
@@groundeffect236 Not at all... It can be a little confusing with all the options. Most folks will start with the tool holder or what we call SYS-FIT Racks... Once you've added your SYS-FIT Racks to the cart, then bop on over to the SYS-PLT Mount Collection and you will see a selection of different mounting plates for your specific system... Have a Systainer and wanna hang something from the front of it, pick the SYS-PLT Systainer3 Mount (will work with TLOC as well) or in your case want to hang some thing from the MFT, select either the SYS-PLT MFT Maximus or Minimus mount. The Maximus mount uses both the upper and lower extrusion support, along with 4 fasteners to provide the most robust (yet removable) attachment to the MFT. Our TRK, HCH or ROS rack are perfect candidates for the Maximus as they are typically going to be supporting the heaviest stuff (tracksaw track, vacuum hose, ROTEX, etc). If you are hanging a smaller sander, one of our clamp (MRC or FCE) racks or our rail square (RSH) then the MFT Minimus is going to be great.
Order placed, used the link for Sedgetools so hopefully the transaction was linked for him. Shame you were out of the 50x100mm half height grays, will need to keep an eye on when they come available again.
This is how I did it. Get yourself a tape labeler machine, I use the Brother P-Touch. PT-P300BT. It uses an IOS app so you have hundreds of fonts and it saves your print history. For the bins if the bins aren’t full I adhere a 1/2” white label to the inside lip. If it’s full I put them on the outside in addition so I know ar a glance what’s in the individual partition. For the top of the outside clear lid I was planning on using 1/4” 6mm transparent with black ink. You can label 🏷️ the inside lip and the outside lip of each of the boxes (1/2” white labels blank in) and put the labels on the outside of the clear lid 1/4” transparent label and won’t obstruct your view.
Thanks Sedge & Big D, it's the after market add-ons that really make it all work together. Some you can make yourself, and some you can get from the 3D community or other vendors. Great job in highlighting options.
Hello everybody , the 3 d stuff is awesome . Thanks for sharing this Sedge ,and the scraper is Super. I am in my garden and make Barbecue and looking Sedge Videos . Greetings from Paradise of Earth Vienna , district twelve .
Hi @sedge great video as always. Just wondering if you have any plans for doing a video on cms router table set up. I know you have mentioned it a few times on the Festool live videos. May be it’s on your schedule already but just wanted to check anyway. Thank you for taking time to do these videos.
How do you even sharpen such a thick scraper? I know you've made some very good vids on that topic. For regular scrapers. But for this one it surely is different, right?
I used my AccuBurr on this one but AccuBurr has a new on that I am thinking of getting to use on the Blue Spruce scraper. It is design to work on the thicker scraper blades that you use in a Stanley #80.
My dad had me sort buckets of inch bolts and nuts as a child. Because of that I can pick out a thread size by looking at it. And I’m getting better at metric but not as good as Minnie
Dear Seddge i need a help information . Why i have in the Domino Systainer Reserve Flaps ? Can you make a Video about this . In the Manual i read this : Remove one of the Stop latches 9-1 Fig 9a. Attach one of the accompanying stop latsches 9-2 to the Dowel jointer Fig 9 b . Thess stop latches are narrower and allow you to make more accurate adjustments . What do they mean by that? Greetings from Austria . Milan
Sedge and Big D, thanks for the shout out this morning!! We are proud to have earned a place in the legend’s shop…. But Big D looked a little left out, anyone think we should show him some love with a couple of pieces of kit for his shop?
Thanks..... for sure !!
Hey! I was looking on your site for the MFT table accessories, but couldn't find them. Am I doing a stupid?
@@groundeffect236 Not at all... It can be a little confusing with all the options. Most folks will start with the tool holder or what we call SYS-FIT Racks... Once you've added your SYS-FIT Racks to the cart, then bop on over to the SYS-PLT Mount Collection and you will see a selection of different mounting plates for your specific system... Have a Systainer and wanna hang something from the front of it, pick the SYS-PLT Systainer3 Mount (will work with TLOC as well) or in your case want to hang some thing from the MFT, select either the SYS-PLT MFT Maximus or Minimus mount. The Maximus mount uses both the upper and lower extrusion support, along with 4 fasteners to provide the most robust (yet removable) attachment to the MFT. Our TRK, HCH or ROS rack are perfect candidates for the Maximus as they are typically going to be supporting the heaviest stuff (tracksaw track, vacuum hose, ROTEX, etc). If you are hanging a smaller sander, one of our clamp (MRC or FCE) racks or our rail square (RSH) then the MFT Minimus is going to be great.
@@forged3dthanks. Did it!
Order placed, used the link for Sedgetools so hopefully the transaction was linked for him. Shame you were out of the 50x100mm half height grays, will need to keep an eye on when they come available again.
This is how I did it. Get yourself a tape labeler machine, I use the Brother P-Touch. PT-P300BT. It uses an IOS app so you have hundreds of fonts and it saves your print history. For the bins if the bins aren’t full I adhere a 1/2” white label to the inside lip. If it’s full I put them on the outside in addition so I know ar a glance what’s in the individual partition. For the top of the outside clear lid I was planning on using 1/4” 6mm transparent with black ink. You can label 🏷️ the inside lip and the outside lip of each of the boxes (1/2” white labels blank in) and put the labels on the outside of the clear lid 1/4” transparent label and won’t obstruct your view.
wicked cool
Thanks Sedge & Big D, it's the after market add-ons that really make it all work together. Some you can make yourself, and some you can get from the 3D community or other vendors. Great job in highlighting options.
Right on
That nut and bolt sizer is great! Thx for sharing!
You bet!
Now that Grabo Box is an awesome IDEA! Ill have to add to my Festool sys box collection!
wicked cool !!!
Hello everybody , the 3 d stuff is awesome . Thanks for sharing this Sedge ,and the scraper is Super.
I am in my garden and make Barbecue and looking Sedge Videos .
Greetings from Paradise of Earth Vienna , district twelve .
Wicked Cool !!!!
Looking good Big D!
Right on
Great Video as always! Packed with REAL useful information!!
Much appreciated!
Nice stuff! I need to come out of retirement to get some of these. Thanks for sharing!
Any time!
That was helpful. I was thinking about but haven't yet put my GRABOs in a systainer.
cool
Great intel on new items!! You always cost me money (lol)... But, so worth it!! 👍👍
Thanks Joe ...
My SST Identibolt Pro arrived yesterday > GREAT Quality!!
Hi @sedge great video as always. Just wondering if you have any plans for doing a video on cms router table set up. I know you have mentioned it a few times on the Festool live videos. May be it’s on your schedule already but just wanted to check anyway. Thank you for taking time to do these videos.
Looks like som great projects!
They are!
Hockey pucks for bench cookies.
cool
How do you even sharpen such a thick scraper? I know you've made some very good vids on that topic. For regular scrapers. But for this one it surely is different, right?
I used my AccuBurr on this one but AccuBurr has a new on that I am thinking of getting to use on the Blue Spruce scraper. It is design to work on the thicker scraper blades that you use in a Stanley #80.
My dad had me sort buckets of inch bolts and nuts as a child. Because of that I can pick out a thread size by looking at it. And I’m getting better at metric but not as good as Minnie
🤣
Dear Seddge i need a help information . Why i have in the Domino Systainer Reserve Flaps ? Can you make a Video about this . In the Manual i read this :
Remove one of the Stop latches 9-1 Fig 9a. Attach one of the accompanying stop latsches 9-2 to the Dowel jointer Fig 9 b . Thess stop latches are narrower and allow you to make more accurate adjustments . What do they mean by that?
Greetings from Austria .
Milan
Those extra flaps are if through wear and tear they start to misalign...... I will try to do a video on this in the future..
@@sedgetool Thank yor Sedge . For the information 👍👍👍👍👍👍👍👍🙋♂️🙋♂️
@ $99 the Thread Checker system is actually not a bad deal. Have you seen how much the kit on a rope cost from Woodpeckers?
I have both....
Can’t find the web site for the Forge 3 D products.
Use this link Larry ....forg3d.store/sedgetools
4:30 too bad it will not work with the new Sys³ systainers as you cannot slide anything into the card holder from the top anymore 😕
Works perfect with Gen3 systainers .. There is a little notch at the top and they fit Perfect !!!! Forged 3D has thought of everything !!
@@sedgetool ha, thanks! Now I need to excuse myself and go file off the excess tabs on my 3D printed clamp holder ☝️😄
Great video but something off with the fps of the video. Gave me a headache watching the jitteriness when the camera guy would pan left and right
we will work on that !!!
I think you mean thread Checker? A thread chaser is a different tool
Awesome tool though👍
Yep ... Thread checker is correct.....Thanks !!