Excellent video, answers a lot of my questions. I've definitely got to get one of these saws. I actually had a dream last night that I bought exactly this saw and loved it, then your video appeared today. I have no choice...😊
Love the video! I grew up on job sites following my dad around as I grew from a toddler to late teen. He was a master carpenter. I mastered the circ at an early age, but I was always cautious of the table saw. Though I have used one for years, I have always hated ripping and sectioning plywood with the table saw, especially solo. So much can go wrong moving the panels over a stationary blade. For safety reasons alone, I can justify the track saw. It’s a lot of money, but my fingers are irreplaceable.
Bought a TS55 about two years ago. It's still in the box with the receipt stapled around the systainer handle. Hasn't made a single cut. Been too intimidated to use it. First project coming up next weekend!
I go way back to the mid 80’s during college working in a cabinet shop up in North Ga. We were setting jobs when the Atlanta suburbs were staring to boom. Table saw was king back in the day (along with the radial arm saw LOL). I’ve had a track saw system for a skill circular saw in my basement shop for 20 years. I broke down and bought the Milwaukee track saw kit recently and wow what a tool. I love it!
Sedg I have a 18 volt track saw have put a new blade it is the thinner blade and cut great not a problem going near edge of material but other cuts not good as riving knife won't follow. Andy in UK
Another great video Sedge. My wife is increasingly getting frustrated with your channel as I keep buying all the tools you review and demonstrate on here. Case in point, I just went out and bought the track saw, and then there was the Domino a few weeks before that, and so on etc.. 😀. Keep up the great work. (watching from Sydney Australia)
Can you talk about your dust extraction set up? It looks like you have the workstation and the dust separator but what are those drawer looking things at the bottom.
My dust extractor is an old CT55 with the CT cyclone and WCR 1000 Work Center ...the drawers on the CT55 and are actually doors and provide some storage options...The CT 55 has long ago been discontinued ... it was the big brother to the CT22 and CT33 ... it still works awesome !!!
I use the Festool trac saw for all the hard wood lumber I mill, and the best sequence is to join one wide face and then rip a straight edge because that’s how you square it and true it at the same time 😅
On the HK saws how tight should the lateral tolerance be? Because the track needs to return smoothly but if it’s too loose it chews up the splinter guard
how would you cut a 45 for a mitered edge trim? Same way you cut for the waterfall? I guess there are two ways, lay the piece flat and tilt the saw, or stand the piece up (as it's a small width) and 45 the fence? (For the record, I gave up on the accuracy of my table saw, and transitioning to my tracksaw 100%)
I have noticed that my track cuts a slight bend in the cut when I join to tracks together and they are touching. I solved this by leaving a slight 1mm gap between the tracks. I think the short sides of the tracks butted together can cause a kink when they are tightened.
Thanks for the video and tips! I am about to buy a track saw (still hesitating between TS55 & TSC55 though). I still have a quick question regarding the bevel cuts (I have to do 45 degrees cuts in the near future): Do you always trust the setting of the saw or do you verify the angle before the cut, with a digital protractor on the blade for instance? Is the scale on the saw trustful enough for good accuracy with assemblies?
I trust the scale...20 years ago when I bought my first track saw I always would use gauge blocks to check the angle...now I trust the scale ... never has failed me... I use a TS60 at home now ...
Looking for a tip. I seem to find my cuts are not a perfect 90 if my board is not at least as wide as the rail. Sometimes I put a board of similar thickness under the rail but this isn't always possible. Any help appreciated. (love the tips in this video)
Great Tips. Sometimes half way through the cut the saw becomes harder to push as if there is an obstacle. I stop, go back few cm and start again and it goes very smoothly again! Never been able to know why.. any idea? Am I doing anything wrong?
So here's a question. Why do Festool and Makita have their short tracks at 1400 instead of 1500? This leaves only 90mm overhang both ends when cutting a 1220 sheet.
Thanks for your answer. I may as well throw another question at you. Are there any down sides to using Makita tracks with Festool saws? They are half the price here in NZ.
Here's to another 20! 🍻 This channel is always my first stop when a refresher is needed. Thanks, guys!
Thanks !!!
I bought my first tracksaw 2 days ago, a Festool TS60. It gave me 'the best cut I have ever seen'!
Great to hear!
Sedge you are a hero!
Just doing what I like to do.....Thanks
Excellent video, answers a lot of my questions. I've definitely got to get one of these saws. I actually had a dream last night that I bought exactly this saw and loved it, then your video appeared today. I have no choice...😊
Glad it was helpful!
Well at least it wasn't a saucy dream about Sedge or Big D 😄
Milwaukee Track saw is cheaper should consider it dude.
Thanks for all the great Festool tips... I'm using my tools much more effectively and am definitely more productive!!
Thanks Joe...🙏
Love the video! I grew up on job sites following my dad around as I grew from a toddler to late teen. He was a master carpenter. I mastered the circ at an early age, but I was always cautious of the table saw. Though I have used one for years, I have always hated ripping and sectioning plywood with the table saw, especially solo. So much can go wrong moving the panels over a stationary blade. For safety reasons alone, I can justify the track saw. It’s a lot of money, but my fingers are irreplaceable.
Thanks for sharing!
Thank you for this Tips Guys , Thumbs up and see you next Sunday Video .
Greetings from Wonderful Country Austria .👍
Thanks for watching! Next Sunday's video is going to be WICKED !!!
Bought a TS55 about two years ago. It's still in the box with the receipt stapled around the systainer handle. Hasn't made a single cut. Been too intimidated to use it. First project coming up next weekend!
That's awesome! It's a great tool and I'm sure you'll get lots of use out of it!
I go way back to the mid 80’s during college working in a cabinet shop up in North Ga. We were setting jobs when the Atlanta suburbs were staring to boom. Table saw was king back in the day (along with the radial arm saw LOL). I’ve had a track saw system for a skill circular saw in my basement shop for 20 years. I broke down and bought the Milwaukee track saw kit recently and wow what a tool. I love it!
cool
Love your videos Sedge! Great tips and tricks. Looking forward to my first beers with the boys this Friday!
Rock on! see ya BWTB
I am leaning towards buying a track saw instead of a table saw for safety reasons, and this video has reinforced my buying decision.
cool.....glad I could help...
Just bought one for that reason myself!
Thanks for the great video! Word of the day - undulations. Cheers!
Thanks for watching!.....undulations !!!
I always learn something with your videos. Thank you. Kerf cutting! My first exposure to, now I know!
Happy to help!
You are a legend man!
awwww gee !!!🤣 Thanks
Impressive! Many Thanks!
🤙
Great tips! Loved it. THanks! Once you go haaaadwood, you ain't going back !
You got that right!
Wicked great!
⚡⚡⚡👍
Sedg
I have a 18 volt track saw have put a new blade it is the thinner blade and cut great not a problem going near edge of material but other cuts not good as riving knife won't follow. Andy in UK
ok
Another great video Sedge. My wife is increasingly getting frustrated with your channel as I keep buying all the tools you review and demonstrate on here. Case in point, I just went out and bought the track saw, and then there was the Domino a few weeks before that, and so on etc.. 😀. Keep up the great work. (watching from Sydney Australia)
Glad to help !!!!! Thank You !!!!🤙
The SEDGE!!!!
The Warren !!! 😂
Can you talk about your dust extraction set up? It looks like you have the workstation and the dust separator but what are those drawer looking things at the bottom.
My dust extractor is an old CT55 with the CT cyclone and WCR 1000 Work Center ...the drawers on the CT55 and are actually doors and provide some storage options...The CT 55 has long ago been discontinued ... it was the big brother to the CT22 and CT33 ... it still works awesome !!!
@@sedgetoolthanks sedge! Those additional drawers look nice! Too bad they discontinued that design.
I use the Festool trac saw for all the hard wood lumber I mill, and the best sequence is to join one wide face and then rip a straight edge because that’s how you square it and true it at the same time 😅
ok
I have the mafell mt55 which has a scoring function, just flip a switch and it will score about 2 mm.
OK
On the HK saws how tight should the lateral tolerance be? Because the track needs to return smoothly but if it’s too loose it chews up the splinter guard
I just put a very loose tolerance so it does not have slop and still slides back smooth... I think that might be a good video ..Thanks Matt !!!!
Does Festool make a pigtail for the TS saw. I have to tilt saw 45 degrees to connect plug it
They do not
Why not, there has to be more that can use it. You said you have large hands on the video.
Great tips Sedge!👍 You gotta have a shawp blade to cut hodwood lumba. 🤣
You got that right!
how would you cut a 45 for a mitered edge trim? Same way you cut for the waterfall? I guess there are two ways, lay the piece flat and tilt the saw, or stand the piece up (as it's a small width) and 45 the fence? (For the record, I gave up on the accuracy of my table saw, and transitioning to my tracksaw 100%)
Make sure you keep your palm down on the base as you are ripping 45 bevels for waterfalls....
I have noticed that my track cuts a slight bend in the cut when I join to tracks together and they are touching. I solved this by leaving a slight 1mm gap between the tracks. I think the short sides of the tracks butted together can cause a kink when they are tightened.
Yes they can !!
Thanks for the video and tips! I am about to buy a track saw (still hesitating between TS55 & TSC55 though). I still have a quick question regarding the bevel cuts (I have to do 45 degrees cuts in the near future): Do you always trust the setting of the saw or do you verify the angle before the cut, with a digital protractor on the blade for instance?
Is the scale on the saw trustful enough for good accuracy with assemblies?
I trust the scale...20 years ago when I bought my first track saw I always would use gauge blocks to check the angle...now I trust the scale ... never has failed me... I use a TS60 at home now ...
Good video! Thx. However, one question.... so, your workshop wall is made out of festool rails :D?
Yes, it is
The table….sweet
cool
Hi, I recently bought a festool ts 60. The cutting depth button does not show correctly. How can I fix it?
I do not know.... I would suggest calling or emailing Festool service.
Looking for a tip. I seem to find my cuts are not a perfect 90 if my board is not at least as wide as the rail. Sometimes I put a board of similar thickness under the rail but this isn't always possible. Any help appreciated. (love the tips in this video)
The only thing I can think of is putting similar thickness boards under the rail...sorry .....
Great Tips. Sometimes half way through the cut the saw becomes harder to push as if there is an obstacle. I stop, go back few cm and start again and it goes very smoothly again! Never been able to know why.. any idea? Am I doing anything wrong?
When this happens to me over the years I have switched to the 28 tooth universal blade ....... hope this helps
Duh. Thats how you zero this thing fast. Thank you sir.
Glad to help
Setting the depth was something I’ve always struggled with. I mean… I get it. But I’ve never seen the zero out thing. That would be much quicker.
awesome ....
1. I've seen a festool branded rail square from UK. Is it built to a different spec or tolerance than the TSO? If not, why produce it?
I do not know ....
How do I purchase a dog hole table like I see in these videos
amzn.to/4fG9Geh
So here's a question. Why do Festool and Makita have their short tracks at 1400 instead of 1500? This leaves only 90mm overhang both ends when cutting a 1220 sheet.
there is enough forward and aft to crosscut a sheet of ply with the 1400mm Rail
Thanks for your answer. I may as well throw another question at you. Are there any down sides to using Makita tracks with Festool saws? They are half the price here in NZ.
From Canada, question that has not been adressed: how to adjust the speed dial of the saw?
It’s on the left hand side of the saw , it goes from 1-6 .
Hope that helps you, from Cowichan Bay 🏝️🇨🇦
@@troyqueen9503 Thank you for your comment: I knew where the speed dial was located, my question was about how to settle it.
The speed dial is for different materials ..I always slow the saw down when I am cutting plastics.....
@@sedgetool Thank you Sedge, so I suppose cutting 15mm baltic birch plywood must be done at full speed?
Hey!!!
Hey !!!
I don't know what hadwood or lumba is
ok
my man has a 20k wallworth of festool rails, I am torn having to spend 400$ on another rail that is just a few inches longer T_T
ok
Burned cuts and worktable damage pro!
ok
8986 out
ok
Can anyone understand this guy😅
I can !😀