Armor for motorcycle commuters - TRIPLEFLEX || CE Level 2 protection by SAS-TEC

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • A COMPREHENSIVE COMPARISON OF SAS-TEC ARMOR
    There are so many motorcycle armor options on the market, how do you choose the one best for your safety needs? What's the most comfortable, invisible, and lightweight CE Level 2 armor on the market? We have you covered with the Phantom Tripleflex lineup by SAS-TEC. From joint protection (knee, hip, shoulder, elbow) to back protectors, watch this video to compare our CE approved level 2 (and level 1) options available now. These crash pads are an amazing solution for all sorts of street riders, especially commuters and cross country travels who want thin armor without sacrificing impact protection. Leave the bulky stock armor in the past and upgrade yours today! There are so many new offerings for 2024, and we have the broadest selection in the USA.
    Shop SAS-TEC on Great Lake Supply Co. → greatlakesuppl...
    Learn about Level 1 vs Level 2 Protection → greatlakesuppl...
    FOLLOW ME
    Instagram @starknakked → / starknakked
    Instagram @greatlakesupplyco → / greatlakesupplyco
    Website/blog → www.meghanstar...
    GET A FREE MOTO RENTAL WITH TWISTED ROAD
    www.twistedroa...
    DO YOU LIKE THIS CHANNEL? SHOW SOME LOVE
    Patreon: / meghanstark
    PayPal: www.paypal.me/...
    Venmo (@lavendersurprise): venmo.com/code...
    Your support allows me to improve the quality and content of my videos and to upgrade my gear.
    ABOUT ME
    Hello! I'm Meghan Stark, a web developer, writer, and motorcycle enthusiast living in Milwaukee, WI. I've been riding on the street since 2016 (in the dirt long before then) and currently own a 2017 Ducati Scrambler Cafe Racer.
    FTC Disclaimer
    This video is not sponsored
    MUSIC
    Mark Generous - C38 - thmatc.co/?l=0...
    Mark Generous - Autopilot - thmatc.co/?l=B...

КОМЕНТАРІ • 51

  • @MeghanStark
    @MeghanStark  Рік тому +6

    Thanks for watching and great to see you! Check out Great Lake Supply Co. for all of the SAS-TEC armor mentioned → greatlakesupplyco.com/collections/motorcycle-armor

  • @OneDownGeneUp
    @OneDownGeneUp Рік тому +11

    Hey all, my husband and I both have a set that we purchased from Great Lake Supply Co and we LOVE IT! Best armor we’ve ever had.

  • @KeViNMCMXXCIX
    @KeViNMCMXXCIX Рік тому +9

    It's being sold here in The Netherlands, it's truly great protection!

  • @craigwalsh2970
    @craigwalsh2970 6 місяців тому +2

    Good information. Most videos are nothing more than a replay of the manufacturer’s talking points.

  • @michelevolz7769
    @michelevolz7769 Рік тому +6

    Ty for the info for direction of the pads

  • @davidgolden40
    @davidgolden40 Рік тому +5

    Great video, Meghan. Very clear explanation of CE level 1 and level 2 armor and pointing out the differences. Info I always wanted to learn more about and finally did. Thanks!

  • @Leoholmes
    @Leoholmes 9 місяців тому +4

    Oooh, the fabric on the outside. I never knew that?

    • @GoldeneBremm
      @GoldeneBremm 5 місяців тому +1

      I'm sure of two things.
      1. That's not how the manufacturer intended it.
      2. It doesn't really matter.

  • @MrMrMckinley
    @MrMrMckinley Рік тому +3

    Just pre-ordered the ultra-thin triple flex few days ago/buy all my SAS-TEC armor from you. Great video/a topic that is lacking information!
    Hands down the most comfortable armor; as you said, you barely even notice the level-1 are there. Only downside is that they are prone to cracking in-between the 'nodes'/not the most durable armor, but that's a trade-off worth making IMO for how comfortable they are.

  • @henryslager9406
    @henryslager9406 3 місяці тому +1

    Now that there are so thin and flexible level 2 protectors, there should be a level 3 certification for better protection.

    • @jameslovesboba
      @jameslovesboba Місяць тому

      Right, I feel like it will hurt more than thicker protectors

  • @adrianhollington6331
    @adrianhollington6331 7 місяців тому +2

    Thank you! At last someone says which way round the armour goes! Even buying garments with the armour and no info.

  • @dasautogt
    @dasautogt Рік тому +2

    Yes! It was very comprehensive, thanks M.. Interesting, I'll definitely be buying these when next up for armour. 🙏

  • @chriscarbaugh3936
    @chriscarbaugh3936 Рік тому +1

    I like how there are a number of options. 👍

  • @AveryCloseCall
    @AveryCloseCall Рік тому +1

    Thank you very much for this. Really good video. As a writer I spent at least it doesn't hours before landing on the SAS pads myself. It's also weird but I do some mediaeval armoured combat as well, and a begun experimenting with using these pads in that setting. Knowing that the level one back protector is the same thickness as the level 2 joint protectors is really helpful information, because it means I can buy those and cut them to different shapes. Thank you very much.

  • @Dr.Sarcasm
    @Dr.Sarcasm Рік тому +1

    Hey Meghan. Just throwing this out there, but have you thought about doing a video about how you started your company? I think it could be an inspiration to some people.

  • @FeedOnSpeed
    @FeedOnSpeed Рік тому +1

    loved how informative this video was!

  • @nulla9601
    @nulla9601 4 місяці тому

    1:16 Wow, thank you so much. I indeed was wearing them the wrong way around.
    When I removed them I did see it says "Outside" on the non-textured side meaning it should point outwards, I completely missed that.
    - Wearing the Pando Moto base layers with the Phantom air protectors (level 1, thinking of upgrading to level 2).

  • @trentgress8187
    @trentgress8187 9 місяців тому

    Received my first set of these and like them so much I ordered 2 more set for other gear!

  • @trentgress8187
    @trentgress8187 9 місяців тому

    Great review! I just ordered a set of these off your website. Can't wait to get them but hope I never have to test them!

  • @SuperLamoto
    @SuperLamoto 8 місяців тому +1

    Thank you for the información

  • @AndrewChristopherEnriquez
    @AndrewChristopherEnriquez Рік тому

    awesome, my current jacket has all the level 1 sastec armor and i absolutly love it, but iwould like to uprade, im glad youre carrying it, plaus id like to pick up some stuff for moto jeans too !

  • @RickMidds
    @RickMidds Рік тому

    Very informative video.
    I just ordered a few sets of Sas-Tec armor from you on Monday. 😉👍

  • @dc5duben96
    @dc5duben96 4 місяці тому

    great breakdown

  • @socialzed6551
    @socialzed6551 4 місяці тому

    Hey I had just one question, is there something for the lower half of the body that acts like a sleeve, the same way your mesh jacket does??
    Im new to motorcycle riding.
    Thank you, great video. Very informative!

  • @Oiboman
    @Oiboman 4 місяці тому

    How many of the MotoGP riders use this? I did the old test with a frying pan using all this clever protections...hitting knees, elbow, shoulders. I don't want to be comfortable, I want to be protected! I will stick to the hard shell protection

  • @charitysketches
    @charitysketches Рік тому

    just started the process, I'm a vespa rider and I still worry about someone not paying attention!!!

  • @fiorehd
    @fiorehd 4 місяці тому

    I’m sorry, I bought all of them, they’re really lightweight but I don’t know if they’ll really protect me in case of a accident, also most these pants or jackets with inserts is not standard to fit any kinda armor protection, I really don’t recommend them, they don’t let me ride comfortable, I’m 6.2 tall -250 pounds riding a softail, now I’m gonna to spend more money and time to get something that really works

  • @cloud9847
    @cloud9847 7 місяців тому

    I just ordered some armor from your store. I've had it less than 7 weeks I believe and once is already cracked and ripping. They've been installed in a Leather Jacked the Merlin Gable. I'm pretty disappointed because I have another set on order due to come in this Monday.
    It's good stuff but man...already cracking and ripping and hasn't seen anything close to a wreck or fall.

    • @MeghanStark
      @MeghanStark  7 місяців тому

      Hi there, that's unusual! What direction did you install the pads? The fabric side should face the road and the textured side should face the body. The opposite direction puts strain on them. We can absolutely send you a replacement pair for the ones that are cracking, go ahead and email us a photo.

    • @cloud9847
      @cloud9847 7 місяців тому

      @@MeghanStark I'll do that today. I had fabric side facing out. Thank you for the reply!

    • @cloud9847
      @cloud9847 7 місяців тому

      @@MeghanStark Thank you for such a quick reply! I will take some photos and send an Email today as soon as I can.

  • @steveaga4683
    @steveaga4683 4 місяці тому

    Can it come with Velcro?

  • @free_range_jeeper9899
    @free_range_jeeper9899 16 днів тому

    I though level 2 kN limits were around 9-12 max?

    • @MeghanStark
      @MeghanStark  15 днів тому

      It depends on the protection zone. It sounds like your referencing the numbers required for CE level 2 back protectors, which are more strict than joint protection

  • @rob.granger
    @rob.granger 6 місяців тому

    Can you notch the level 2 elbow armor?

  • @irarabesc
    @irarabesc Рік тому

    Does anyone know some knee protectors that use these thin SAS-TEC L2 pads? Can't find anything.

  • @play150
    @play150 9 місяців тому

    Is it fine if it cracks? some of mine have cracks in them :/

  • @lylemacdonald6672
    @lylemacdonald6672 Рік тому

    Are the sizes and shapes universal across jacket and pant manufacturers? If not can they be cut to fit or will that defeat their purpose? I would love to upgrade with these products.

    • @MeghanStark
      @MeghanStark  Рік тому +1

      You should always measure the pockets that you have available because there will be variations across manufacturers. That being said, these do work for a large variety of jackets and pants! I recommend looking at the exact dimensions on our site and estimate a bit of extra room for the protector's depth.

  • @randypower
    @randypower Рік тому

    Do these harden on impact?

  • @den_525
    @den_525 25 днів тому

    bumpy side facing out or inside ?

    • @MeghanStark
      @MeghanStark  25 днів тому

      That should actually be facing inside! Fabric side facing out, "elements" facing towards the body according to SAS-TEC

  • @seazv
    @seazv 7 місяців тому

    What side go close to the skin?

    • @MeghanStark
      @MeghanStark  7 місяців тому +2

      The textured side (also called the elements). The fabric side faces the road. I go over this at 01:24

  • @dimos15
    @dimos15 Рік тому

    nice

  • @benderbender1233
    @benderbender1233 Рік тому

    🤘😘🤘
    kn0t in2 it but g0nna watch it anyways!
    🤗