DCS: AH-64D | Getting Airborne
Вставка
- Опубліковано 5 лют 2025
- Have questions? Please see our FAQ at:
forums.eagle.r...
NOW AVAILABLE!
www.digitalcom...
Planned remaining videos:
Landing
Controls Setup
Defensive Systems
George AI
Cold Start
In this DCS: AH-64D video, we’ll explore flying the 64. We’ll discuss how to taxi, takeoff, also called picking up or “pulling pitch”, and basic trim. We’ll dive into landing and the attitude and altitude hold modes in later videos.
We’ll begin today’s lesson in western Iraq. I’m on the ramp with all the systems set up and ready to go. We’ll discuss the startup procedure in the final video of this series. - Ігри
New Apache pilots tend to stare at the symbology when hovering instead of, as you pointed out, just look outside and hover. At night however that symbology is gold.
What's the difference between aerodynamic trim and nose to tail trim? Is the former not applying any counter torque with the pedals or what is it?
@@thomasmaier7053 trim in an aircraft doesnt mean it’s going straight. The nose can be canted off center of the flight path.
Hey Casmo. What's your take on the launch sound effect from the previous Hellfire tutorial vid. The irl footage I've heard sounds faster, sharper and "rips". The sim footage sounds hollow, deeper with more base. Which do you recall?
@@thomasmaier7053 Aerodynamic trim = aircraft's body is aligned with the air moving around it, instead of where the aircraft moving in relation to the ground. AFAIK this means less strain on the body of the aircraft and more efficient travel, since the nose is basically pointed at the relative wind direction.
Nose to tail trim = aircraft's body is aligned with where you're moving in relation to the ground. You're moving "straight", like you would in a car, but you're exposing more of the body of the aircraft to the oncoming air, causing more drag.
@@shd4618 I think it’s fine. It’s a video game. 🤷🏻♂️
Finally, the return of "what's that X doing there?" :)
Ooohhh yes!
Can we please take a moment to appreciate how beautiful DCS has become in 2022? Ok, so I love the Hind and I love the Apache even more. This was the chopper I've always wanted to see in DCS and now there it is, finally. On top of it all, we will get the Mirage and the Phantom this year. How cool is that, actually? In these difficult times ED still manages to make us smile and enjoy ourselves. Outstanding work, ED. 👍
Mirage and Phantom this year??
Steady on now.
I'll think of 2023 just to avoid disappointment 😁
Let's not forget the Eagle ! Phantom was slotted for this year and Heatblur had already been working on before the announcement 🤙
I occasionally watch UA-cam videos of Janes Longbow. I loved that game and put so many hours into it. I returned to playing sims when ED released LOMAC and really got hooked with the Black Shark in 2008. It is amazing to see how far military flight sims have come, with DCS setting the benchmark. Thanks to developers like ED and Heatblur, who keep pushing the envelope. It is the stuff of dreams!
Ya I jumped on to fly a fun little mission over the Caucasus with the Su-25t for old times sake. It feels SO smooth and looks so good now.. I dont know if its because ive been playing on Syria for a long time, or because they updated the Sim, but either way its never felt better in VR
hell yeah bro
"What's that Mirage doing here?" was the moment I needed to see in this video! :D
I think I haven't notice something ?
@@ekushisu_ Just as video starts ( 0:30 ) there's a mirage taking off. And Wags is like "huh, a mirage". This is a tease of some mirage update probably, because i don't think those are f1's (could be wrong). Also this is a throwback when Wags teases new aircraft in his new videos by pretending to not know that the aircraft, he put himself into the mission, are there.
@@janzodak1759 f1 mirage went to eagle dynamics yesterday for testing...so yes they would be f1's
@@janzodak1759 Yeah seems casual dcs players well known Mirage 2000C to me.
@@janzodak1759 Yeah the don't look like F1, although I could also be misktaken. However, this Wags always teasing us; I hate/LOVE him.
the fact that we’re getting a take off tutorial means Its getting close real close. Super excited
two weeks
just 1 more year till release!!!!
Last video will be start up. We are less than a week.
Still five videos left... hard to think that will happen for a release this Friday.
@@nexus888 yeah , I though just start up was left but there are a couple. Chomping at the bit over here
I have never been more excited for something. My wife and children will miss me.
thats nice
Nobody will miss me when i get shot down over Syria. 😭
@@Topper_Harley68 skill issue
Teach your wife how to work the second seat and your kids to watch and report on your gauges! 😉
I've sat in a Mirage F1. I haven't sat in an Apache. I'm so grateful that both are coming....thanks guys. Awesome work.
I've sat in the apache at Oshkosh but not the mirage 😃😃
@@thelmaviaduct Biggest airshow in the world!
@@thelmaviaduct no in Wisconsin. Late July.
@@thelmaviaduct Oshkosh, Wisconsin..USA :D
Now were just waiting for the startup video :)
Wags getting distracted by the Mirages taking off, in mid-tutorial, is the most relatable content ever.
squirrel!
Wonderful video Matt. Many thanks indeed. Kind regards, Nick
My pleasure!
Is this "Nick from Eagle Dynamics?" 😄😄
This is genuinely making me so happy! THANK YOU for the years of effort that must have been behind the licensing and coding to make this a reality!!! Can't wait to take to the skies.
I just sat through a whole series of how to set up the controls for, perform a cold start for, and how to get airborne with an AH-64D and I don't even have DCS. This was very interesting to watch and I'm blown away at the complexity of the aircraft in DCS! Watching the entire process on getting this simulated beast airborne was very entertaining and I feel like I learned a lot, even though I'll probably never use the info. It certainly gave me a greater appreciation for the complexity of these machines. Keep up the good work!
I really love the light humour thats crept into these videos, the "words are hard" text that popped up mid tutorial had me chuckling all day. Thanks for the great work Matt and all of ED in these darker times, a smile can make all the difference to one's soul
Nice demonstration and addition of text. The sounds of the Apache are astonishing. 🚁
For starting out, if the PERF page is providing accurate data, simply increase collective (power) until you reach the predicted hover torque. Takes the guesswork out of coming up to a hover. Apache pilots will hover at 5'. Kiowa pilots will hover at 3'. As Wags mentioned, in Hover mode symbology, full saturation of the velocity vector is at least 6 KTS. In Transition mode, full saturation is at least 60 KTS. The aircraft sits at a 40 KTS attitude on the ground. So... if you feel like doing a perfect 3-point landing, hold about 2/3 saturation of the velocity vector (40KTS ground speed) in transition mode while doing a roll-on landing. Obviously, wind has a say in things, but for the most part, it works every time. Useful for those single-engine landings where a runway is available.
Is that the "power check"? I read in the manual that you should conduct a power check prior to take off but I have no clue what that is and how to do it and it's not described in the manual
@@boggy8557 Well, we're supposed to do some form of performance planning before the flight, so we know if the machine is behaving as expected. Chapter 7 of the operator's manual is full of fun charts to derive data, and then you find out if your loadout is suitable for a particular mission on a particular day when environmental data is entered into the equation. The PERF page is supposed to come close to what the manual would tell you, but as of a few years ago, it wasn't 100% aligned with the book data. Power Check is mainly verifying Go/No-Go data. If you're pulling more than expected, you may not have enough power to do certain maneuvers, etc. For the purpose of the game/sim, the PERF page should suffice. If predicted IGE hover power is 62% torque, you should see 62% in the upper left corner of the HDU at a 5' hover. If that's the case, you can assume the rest of the PERF page is good (or good enough for an unclass'd sim).
@@robk5943 Thank you so much for the detailed reply, that's awesome! The other thing I was wondering about was how do Apache pilot's fly a traffic pattern when learning to fl the Apache on the conversion course? I have been searching for info on this but google has been useless...
@@boggy8557 If you mean Aircraft Qualification Course, or Transition Course, it's the same as learning to fly any other helicopter. I transitioned from UH-60's and the only immediate difference I noticed was that landing on the tailwheel first (for aerodynamic breaking during a roll-on or single-engine landing) was a no-no in the Apache. My IP thought it was funny, though. Patterns are rectangular with an upwind, crosswind, downwind, base, and final legs. Most traffic patterns are performed to facilitate emergency procedure training, so we try to achieve the desired airspeed and altitude on the downwind as soon as possible. Then, throw in a simulated malfunction, and hopefully end up on the runway with the greasy side down a few minutes later.
@@boggy8557 Also, Force Trim - in the form of a mag break to hold the cyclic and pedals - is always on. Some transitioning seat-of-your-pants pilots (OH-58D) made a habit of holding the trim release button, but I tried as best I could to break them of the habit. Interrupting the force trim also interrupted the tech that can make mediocre Apache pilots looks like Chuck Yeager. Keeping it interrupted just had the opposite effect, but also took the "fight" out of the flight controls. I learned to set it and forget it, then use pressure/counter-pressure against the mag break resistance. I taught it, too. Drastic control position changes warranted major trim interrupts, but in a traffic pattern, not really. And, you don't need to interrupt the force trim to move the up/down stick, which helps. If your heading and airspeed are good and you only need to come up ten feet to be within standard, just pull up slightly on the collective and leave everything else alone. The altitude will change, but the airspeed and heading will remain mostly unchanged. Seat-of-your-pants pilots had to change everything when making small adjustments like that. Not the case in the Apache. Some habits are hard to break, though.
Sure has come a long way since LOMAC! Glad to see you're still involved Wags.
Thank you Matt, good demonstration.
As a side note, there are 26 moments (counted) in this video where I will be spinning out of control, flipping, crashing, breaking, swearing, blaming the ground crew, the list goes on.....
So yeah, looking forward to it.
@@nooneathome1433 not possible to crash an apache you'll be fine
@@chronos1081 "not possible to crash an apache"
Yes it is. My apache is now parked in the hanger alongside the Ka-50, Mi-24P, SA342, Mi-8,
UH-1H. All have the same flight characteristics, Slightly raise collective....spin flip crash.😂
@@nooneathome1433 scas makes it basically impossible unless you are damaged lmao
Phenomenal, Wags. This is going to keep all of us early access folks very, busy...thanks to the team for getting the ED EA manual out too, for some extra homework. We've got some cool stuff to distract ourselves with this year, Mirages among them...
"what those mirage doing here"
Oh oh, I know what you're doing here, Matt !! 😉
I really can't wait for the apache and the Mirage F1 ❤️
Another great video from Jedi Master Wags. Less explosions (on both sides) but still fun to watch. With all these videos coming in such a short time frame now the word "imminent" seems to have wormed its way into the base of my brain. hehe
I'm still very much learning to fly the 64 and my no means an expert. But even I can easily hover and fly the aircraft. Next to the Ka-50, it's much easier to fly than any other DCS helo.
Wages thanks for detail tutorial videos looking forward for the apache release
Most interesting thing I saw was the SCAS authority boxes around the control positions. This is going to be a big help in getting people to understand how the SCAS works.
SCAS authority? Tell me more!
@@Dreamshadow1977 The SCAS (Stability and Control Augmentation System) works behind the scenes to keep the aircraft stable and to permit the various hold modes to function. It has +/- 10% authority on each axis (except pitch, where it appears to have 20% forward authority). Those grey boxes on the control indicator are centered around the physical control positions, and show where the SCAS could drive the actual command to the rotor heads. It's transparent to the pilot since the SCAS commands are essentially superimposed on the cockpit control positions with no feedback to the stick.
In game, on the control indicator, the red X's appear to denote the trim position, the white diamonds show the control positions, and the green +'s show the SCAS command within the grey SCAS authority boxes.
I've been waiting for this since Jane's AH-64D Longbow in '96, one of my first sims I ever bought.
Haha that Mirage sneak peek, such a tease!
This is awesome and I look forward to another video tutorial on flight in the Apache! Thank you for your time on this video.
I'm pretty eager to get into this sky blender. Looks like you've got another winner in this module. And I suspect this module will eventually be as deep as the A-10C. Good work ED. And yes, I've been flying the Ka-50 a lot recently to try and remember helicopter tactics.
Mirage F-1! Woot! It's going to be a busy time in DCS.
Sadly when looking closer those were M2000c's
Edit: nevermind I was wrong lol my bad
Looks very nice to fly! Cant wait to hop into this beauty!
Yes sir! I would like to get airborne in the AH 64
Even though I can follow this tutorial to the letter, I am find the amount of torque required for ground taxi, hover taxi, and flight differ based on the map and weather conditions as you detailed which is what is so cool about this helicopter module! Thank you for the symbology tutorial as well it helps me understand what the aircraft is doing. Even though I find myself reacting to what I see the aircraft actually doing outside the window lol. I managed to get airborne a coupe of days ago. But I find myself tilting on the right side even with the rudder trim locked slightly to the left, be it may not far enough to the right. But that too I will learn what the sweet spot is that I managed the first time I got it. Although my landing was a bit rough I pat myself onthe back for not exploding her lol! But that is another Tutorial I will have to study! For now its practicing hovering and taxing and flight!
I remember moving Apaches and Blackhawks around in the Army. But the funniest thing was when you were NOT on the movement team and you're just doing what you're doing, and suddenly there is this loud *BANG*, because the tow team forgot to unlock the tail wheel pin and that sound tell the whole hangar that they just sheared the pin in spectacular fashion. It usually got a laugh from everyone in the area and made the faces red of the tow team. haha
Indeed, getting the locking pin lined up may throw a few folks.
Great vid. Sounds are amazing. Thanks for your time, Wags.
Really well done video wags, and some good flying too. I can tell you've spent some time with Casmo! :D
Getting there, but she really is an easy helo to fly.
Too tired to start digging into the pocket sized quick start guide, but this will do for tonight's nighttime viewing.
Even though I've only ever messed with rotary in DCS as a novelty, I can see why I absolutely had to get this one. It might just be the most ambitious consumer flight project to date.
I'm also amused by the instruction Wags is passing on to us from the SMEs. This stuff is obviously not just randomly made up and is presented in a really good format. Apache is going to be a whole new experience.
ooOOOoooOOOoo!! These are comming thick and fast & now the startup. AH-64D confirmed this week ;)
Source?
This week????
Not happening, calling it now.
The Release is an the Horizont! 🤩
Awesome Video Wags. Just a note around 3:40 you mentioned that because the translating tendendy you should apply right cyclic and if I remember right the huey and apache need left cyclic to counteract that.
Nope, left.
Hover taxi practice:
"Let's go ahead and slow down by pushing up the nose reducing the collective... (Apache slams on runway) and we're down." Haha
SO ready for this! Can't wait!
WEVE BEEN WAITING FOR THIS!
man i cant wait for this thing! ill be taking a vacation from work lol
"Words are hard." 😆😆😆 Good on ya, Matt ✌
What is nose-to-tail trim vs true trim?
Thanks for your work Matt W, great job of the whole team!
I can't wait to fly this, I'm so excited!
Can't wait to get a hand at the Apache. I been flying it in Arma 3 for weeks
You know what they say about seeing Mirages in the desert. ;)
the only think that sparks joy lately. DCS
omg it looks so beautiful!! I can't wait to fly this!!
Is breaking the tail wheel lock pin modeled? Can't wait to get out the ol' Philips screw driver to replace that dang thing again.
I would like to get airborne soon too.. so hard to wait
Read the description ;) HYPE IS REAL!
Nice instructional video Matt. Great to see. Out of interest which map and airbase is this??
Ruwwayshid in western Iraq. H3, H3 Northwest, and H3 Southwest are to the north, and H4 is off to the west. These are all part of the upcoming Syria map update.
@@MattWagner Awesome really looking forward to more Syria map
@@MattWagner - awesome, thanks Matt. I’ll look forward to that update.
It's going to take me longer to watch these tutorials in their entirety than I actually have to play dcs😄
I just love your Easter eggs, Wags! So, how far along is the Mirage F1?
Supposedly it’s complete- the devs submitted it for review
Whered you read that? Excitingg
@@chikokishi7030 hoggit on Reddit
When I press "R CNTL Enter" I only get the cross image on the left. How do you get the other indicator on the right side to appear? I am using VR.
A tail drawing heli, a fairly unique bird. Lifting it off the ground onto a hover for the first time will be interesting for the first time. On the downside, I don't have anything in the cockpit to stick my finders into, like on the Hinde. There is no fan, although there is that S hook off the the left ...
Finally a tutorial where I can say "Okay, understood everythig!" I'm so glad that I will start learning this module as pilot and my multicrew buddy will be the CPG first 🤣🤣. I can't wait until release...
And OMG that beast sounds badass!!!
Left boot, near rocks, far rocks…that’s got Casmo written all over it. 😂
I tried learning how to fly the KA-50. It took half and hour just prepping for taking off. I finally gave up, no longer even try to fly a Heli.
Worth a wait
Outstanding! So excited!
So, when i got this right. The Apache basicaly uses the same trim as the KA-50? Hold Button, navigate and when youre done and want to hold your current path/pitch/roll you just release the button?
Great video! I can't wait to have fun with this helicopter! Just a question Wags, do you have any plans for the AH-64A in the near future which I really like too?
Awesome video Wags, can we expect the next lesson this weekend? Thanks
Yes, landing.
@@MattWagner Sounds good I'm looking forward to it! Thank you for such an impressive module!
Hey wags, quick question will the Apache be getting the IR jammer function in dcs or would that be under the radar jammer category? Thanks!
That would not be accurate for the year/block.
Thank you, sir.
Thanks Wags :) Gettin' closer!
Slide to the left! Slide to the right! Criss-Cross! Criss-Cross! Cha-Cha Real Smooth!
You guys need to have the acceleration que move with the cyclic while the aircraft is on the ground too. The acceleration que is live indicator of the cyclic postion. Also there's no altitude indicator for msl. Only agl. It's annoying having to reference a flight page for my altitude when a real hdu displays msl and agl.
Wags it would be great if you say what button or the name of the function as it is on options to try to follow what you are doing, otherwise is almost impossible or time-wasting.
Currently in the Apache course and genuinely curious if that’s how other people’s symbology looks in the HDU. It took me like 5 helmet adjustments and eventually a smaller helmet just to barely fit the entire display into my eyepiece. If it was as condensed as this video shows that would be so much better for your scan. And we’re not supposed to go into the maintenance function of ihads to shrink it. I hate spending so much time on run ups making sure I can see all four corners in my eye
The magnetic lock will save my wrist! I use that TM T.16000 joy stick that the spring in that is just a bit to strong for long helicopter play.
I had to modify mine by taking it apart and zip-tying the spring a bit to make it more loose. Worth a shot, and AAR in f16 / etc is much easier now as well! Search youtube and you'll find the video I'm talking about. Hope that helps!
Looks great!
Can we blast targets while we are on the ground or is there a weight on wheels switch that prevents us from being a hero?
im so pumped for this
Got a new hotas and pedals in the mail just for this module.
J'ai vraiment hâte de la piloter ce AH-64 ;)
Wow, I just cannot trim this bird, Wheres the Force Trim RELEASE SWITCH you mention, I can't locate it in the cyclic settings anywhere, Love your vids Matt
ua-cam.com/video/HmjNjNDp0JA/v-deo.html
A technique for visual hovering is to concentrate your view at 45 degrees either left or right of the nose. From there, you can see both lateral and longitudinal drift pretty well. From the 45 you also only need to move your head 45 degrees to either the nose or the side, instead of 90 degrees from the nose to the side. Obviously, you can switch which side you are focused on or move your head as needed to avoid obstacles! BWT, doesn't the AH-64 have wheel brakes to slow a ground taxi?
Yes it have wheel brakes but they 99% using the cyclic to slow down or stop and then they press the brakes and put parking brake on position. I mean yes you can use brakes but cyclic is the right way for this.
Wait.... you hold it?? Does trim set when you let off of the button? I've been adjusting pedals and LOS then pressing once and releasing the button which seems to work?
Hey everyone, Wags here from Eagle Dynamics. In this tutorial, we are going to talk about hovering, and go over taxiing ... what's that Mirage doing here? ...In this tutorial, we are going to talk about the AA capabilities of the AH64 Apache Helicopter.
I saw mirage F1. I am in heaven.
my torque is at 80-90% at a hover and i dont khnow why, ive tried starting up cold and starting hot and it doesnt seem to fix it. Can someone help?
Probably way too heavy, OAT too hot, or high MSL.
0:30 POV: The F1 steals the show xD Just kidding
Those are m2000c's though....
Edit: Whoops
Nope, Mirage F-1.
@@crazygmanssimstuff it s a mirage F1. And judging by the antena on the tail and the bump on the chin it s either a F1CT or a F1CR. So they re AI (for now at least)
@@spartan-ml7nk apparently those are just different skins Aerges said they were coming out with just the F1-CE first then the F1-EE, F1-BE, and F1-ME
@@crazygmanssimstuff yes, however, they make different AI model. And this one is a CT/CR, you can tell by the antena on the upper part of the tail and the bump under the chin of the aircraft.
0:33 "What is this Mirage doing there"....yeah why is there a F-1 Mirage huh? Haha. Looking forward to it though!
It’s in testing right now so it’s coming real soon
@@RW-zn8vy Yeah ik, looking forward to it!
HI Matt, great video as always and super excited for the Apache. I know this might be covered in the George A.I. video but will George be capable of takoff, taxi, nav and landing? Thanks :)
Yes, please wait for the George video.
Well I would love take off and fly around but for some reason when I lift the collective and the wheels unstick the damn thing only goes backwards....it appears the input from the joystick is ignored. Yes I did ctrl/enter to put that box thing in the corner and yes according to that everything is fine ...but Im still only taxiing/flying backwards. Can you fire hellfires backwards?
Please watch the section on trim here: ua-cam.com/video/ZGLLDXKecsc/v-deo.html
This is my first helo and I don't understand how to get up in the air. when I practice, I am at about 6 feet but I can't get any higher, how do you do that?
Can you do a wither video on the trim button on cyclic more in details ?. Because, I saw that it has att hold and altitude hold. So I dedicated video for trim that would be great.
Thanks
Yes, once all the trim and hold modes are complete.
Wagner please put in an AI or AP mode to help new players control the spin during hovering. A lot of us do not have pedals and it's almost impossible to control this thing without them for hovering. I think it's sort of crazy this wasn't considered in development. You probably want to put a disclaimer up that pedals are highly recommended or required to use this module.
We said we are, and in the meantime it hardly impossible. You can find many many videos of this. It takes practice.
What was the difference between the two types of trim he applied at the end?
Amazing demo. A liked that exhale voice when You finished doing hover demo :-D. But I've just realized, that when You release the Apache, it's gonna be in beta for some time, right? :-((( Isn't it possible to release the new modules for non-beta version as well? Pretty please.
thank you for such a great video - how do u switch off the hmd
press i
@@MattWagner THX
I LIKE THAT S-HOOK by the top left.. lol
At 7m18 on this video we can briefly saw a CH-47 Chinook, do you think it's a kind of teaser ? My dream is one day to have this modules.
Saw that as well...
Ground textures are looking older by the day Matt, great work on the ah64 thou.
looking forward to!
Is there an auto hover button like in the blackshark??? Please tell me there is :)
forum.dcs.world/topic/296319-devs-for-the-sake-of-being-the-pilot-please-add-auto-hover/
LOL - is the Chinook a teaser for something coming in the future??
Just a common US Army helo in the background.
I’m glad I don’t have to pay for each heli I’m going to crash. I have problems with hover in any heli I played, but I can’t wait to crash this one here, been waiting since Jane longbow back in the day to fly an Apache 🤩🥳
0:30 "SQUIRREL!!"
-Wags
Lets place bets on how many people are going to think the tail wheel is broken, once they can't re-engage it LOL
Astronomical.