Thank you Craig for that great explanation, it helped me a lot. I have to admit, the best advice was to get a good data cable. None of my existing ones worked and so I got a real short data cable and that did the job. Everything worked like you described it. Thank you again and keep your videos coming.
Thanks for the thorough walk troughs. If I hadn’t seen your video I might have had a brick named Noble NB4 Pro right now🥶 I did the former update with the assistant, it went well that time thankfully. You’re right about loading model memory - the second attempt loaded correctly, although the assistant crashed both times. Subbed! 😉
Yeh I do these vids to help people avoid the issues nothing worse than looking forward to a nice new update only to make a mistake and get a very expensive paper weight, glad ya liked it and welcome to the channel lots more vids to come :)
My nb4 has been great so far.. my plan is to move to the pro after this season so probably late winter early 24. Hopefully by then the new software will be more worked out and user friendly.
@@WTFRCCars right, I got the nomenclature wrong, I was speaking of Assistant .. my bad. My nb4 is fine and meets my needs presently. Hopefully the assistant will get better by then.
Amazing job again Craig. Yes it was scary using assistant on the 1.0.2 firmware. Glad we have a safer way now. Do we know the difference of the 1.0.3 vs 1.0.2 yet?
Craig, Thank you for this incredibly helpful video! Going step by step and being thorough is so important in a video like this. I look forward to your video for updating the receivers as well. I've many FGR4-GYB units to update. When re-binding after installing the models back to the Noble pro, will all parameters (epa, exp....) need to be reset? Thank you!
I have a Noble Pro running firmware 1.0.2 std from dec-23-2022, I have tried to update the receiver with the latest from the Noble assistant but it doesn’t see my receiver when I plug it in. Any suggestions 😢. Any help would be appreciated
Is it possible to get the nb4 to have the same updated display with the gauge and better telemetry. I updated it and its still the same apart from some new alert features.
@@WTFRCCars Had a go on the NB4 last night to test out the feel. Really nice bit of kit. Only minus is the roller dials on the side are right where my thumb rests. I'm sure they are useful for crawler drivers etc but for racers they are not required and slightly off putting comfort wise - are they removable?
I use them all the time for racing as I have my dual rates on them, the steering dual rate is really useful for indoor touring car racing as the track conditions change through the heats as more compound gets laid down on the track you need to reduce the steering dr to stop grip roll :)
I am trying to update tp the new firmware with the stock cable I get to the part where it asks if i want to update then it turns off then on and says do not operate during updating then when i try to say start update nothing happens?
So it’s been 5 mins and the assistant won’t connect to server.. I’ve added it to my acceptance list in my firewall I’ve tried to run it as administrator and it just won’t connect any advice?
Thank you Craig for that great explanation, it helped me a lot. I have to admit, the best advice was to get a good data cable. None of my existing ones worked and so I got a real short data cable and that did the job. Everything worked like you described it. Thank you again and keep your videos coming.
Happy to help mate and glad ya got sorted :)
Thanks for the thorough walk troughs. If I hadn’t seen your video I might have had a brick named Noble NB4 Pro right now🥶
I did the former update with the assistant, it went well that time thankfully. You’re right about loading model memory - the second attempt loaded correctly, although the assistant crashed both times. Subbed! 😉
Yeh I do these vids to help people avoid the issues nothing worse than looking forward to a nice new update only to make a mistake and get a very expensive paper weight, glad ya liked it and welcome to the channel lots more vids to come :)
@@WTFRCCars Highly appreciated that is😄 Wonder why FlySky don’t notify on their page, or via the assistant app?
Yeh assistant v1 was great I like the functions of assistant v3 but it need a serious re design I don't like how it works at all :(
Thanks for making this video, the assistant is frustrating, and the update is kinda sketchy, but it works following these instructions!
Yeh the updater software is solid just assistant v3 need a lot of work
Fantastic! Thanks so much for doing this. Your videos are so easy to follow and also full of good information. Thanks so much!
Really glad ya like em :)
Thank you for your incredibly helpful videos on the Noble Pro!
Thanks so much I should have lots of noble pro vids over the next few weeks :)
My nb4 has been great so far.. my plan is to move to the pro after this season so probably late winter early 24. Hopefully by then the new software will be more worked out and user friendly.
The firmware seems fine just assistant for both nb4 and pro needs work
@@WTFRCCars right, I got the nomenclature wrong, I was speaking of Assistant .. my bad. My nb4 is fine and meets my needs presently. Hopefully the assistant will get better by then.
Yeh the nb4 is definitely still a fantastic tx and I really hope they do sort out assistant v3 :)
@@WTFRCCars thank you again on all the great info you put out on this product, I can honestly say that it has helped me immensely!
No worries 😁
Amazing job again Craig. Yes it was scary using assistant on the 1.0.2 firmware. Glad we have a safer way now.
Do we know the difference of the 1.0.3 vs 1.0.2 yet?
Just the kyosho but that ain't been released yet had to be removed :)
Craig, Thank you for this incredibly helpful video! Going step by step and being thorough is so important in a video like this. I look forward to your video for updating the receivers as well. I've many FGR4-GYB units to update. When re-binding after installing the models back to the Noble pro, will all parameters (epa, exp....) need to be reset? Thank you!
So long as you restore from your assistant back up all you need to do it re bind :)
Hi Craig thanks for the great videos, my problem is I am a Mac user and I see no downloads for mac.
Assistant v3 isn't working for Mac's but flysky are working on the mac version
thanks craig this helped me
Glad to hear it
I have a Noble Pro running firmware 1.0.2 std from dec-23-2022, I have tried to update the receiver with the latest from the Noble assistant but it doesn’t see my receiver when I plug it in. Any suggestions 😢. Any help would be appreciated
I'd update the transmitter 1st 1.0.5 is the latest for the pro then update the receivers :)
Spill the beans... is there a new update coming for the NB4?
I couldnt say even if i knew could i...
@@WTFRCCars NB4 UI needs help... its capable of so much more! Honestly they would sell a lot more units with a fully customizable UI.
they said they will not let nb4 user down on their Facebook page
@@PhilDugre thank you buddy
And I very much doubt they will let the nb4 users down :)
Thanks!
No worries:)
Is it possible to get the nb4 to have the same updated display with the gauge and better telemetry. I updated it and its still the same apart from some new alert features.
No only the noble pro can run this firmware
What a nightmare. Great looking transmitter all the same.
It's not as bad as it looks but they really need to sort out assistant v3
@@WTFRCCars Had a go on the NB4 last night to test out the feel. Really nice bit of kit. Only minus is the roller dials on the side are right where my thumb rests. I'm sure they are useful for crawler drivers etc but for racers they are not required and slightly off putting comfort wise - are they removable?
I use them all the time for racing as I have my dual rates on them, the steering dual rate is really useful for indoor touring car racing as the track conditions change through the heats as more compound gets laid down on the track you need to reduce the steering dr to stop grip roll :)
I am trying to update tp the new firmware with the stock cable I get to the part where it asks if i want to update then it turns off then on and says do not operate during updating then when i try to say start update nothing happens?
Using the software updater or assistant v3 ?
So I don’t use the noble assistant to update? Just got a pro and want need to update
Thanks that went flawless because of you again!
I just use assistant to back up and restore the memory I don't trust it to do the update :)
hello if i buy the nb4 pro us version, can i change by updating the firmware in eu ? Then is it regular for Europe correct? Thank you Fabrizio
No it will only update to EN not EU firmware
Just got my noble pro, do I have to do the update firmware? Thanks
If it's not on the latest firmware then I would update it :)
Ok thanks
So it’s been 5 mins and the assistant won’t connect to server.. I’ve added it to my acceptance list in my firewall I’ve tried to run it as administrator and it just won’t connect any advice?
It's really slow I've had it take over 10 min at times
@@WTFRCCars dear god they need to fix that shit!
@KingRc72 yep been telling em for ages
@@WTFRCCars well it’s been half an hour now and it’s still not connected guess I’m not updating my noble pro…
@KingRc72 Just download the updater not assistant and do it that way or do you need to back up your memories?
can i back up from nb4 pro and upload to nb4 pro+
its say not computable do you want Continues
Yeh it will warn you cos it's a different tx but it will work fine
Where do we get the updater software?
All the links are in the video description :)