Another spot on video. I must stop watching them though... I keep buying new stuff to attach to this radio seeing everything you post makes it easy to get it working. Now it's a $200 Kyosho (Money-Pit) Mini-Z (and the FlySky plug in bit).
Hi you make grate videos on the noble thy have helped me out, now I'm having a problem got a fhss module for my miniz but fallowing al your update tutorial wen i going to bind i got a message module not inserted o module fail have updated to the 3 lates firmwares algo gon thinthe hobby shop they Open a new module and still having tha same masaje last nite i open the remote and check the part where you insert the module used a multimeter afte removing the battery and check for continuty between the bord ande part that holds the module all six points shoin god conection to the main board i dont know what els to look for
@Tomzak11 so you should be in the latest firmware 2.0.102 but if your getting an error it's most likely that something is not connected to the bottom port that the frm005 plugs into or the frm005 is not pushed all the way in, have you checked the port connection inside the grip to the board?
Just subscribed since your videos are super useful. Little question though, you said you chose the non fcc, version because you have no range issues, is the fcc version limiting the power output for the noble? Edit: just read it in fa website the fcc version has 20% more range.
Yeh more range as it runs higher power but you get less battery life, it's also not legal for use anywhere other than USA states that fall under FCC rules for RC ground transmission, if you want crazy range you can use the range extender with both nb4 and noble pro :)
Hope you can help. I just upgraded to the FW2.0.100 firmware but when re inputting my models back into the NB4 none of them work with the receivers. Any ideas? Using another non updated NB4 still works perfectly.
Also what version did you come from if it was below 2.0.93 you will need to update your receivers firmware if you look through my playlists for the NVR receivers you will see how to do each one :)
@@WTFRCCars It was from 2.0.93. So if I move the model list from one controller to another via Flysky assistant I have to rebind every model? Spoils the point really.
Another spot on video. I must stop watching them though... I keep buying new stuff to attach to this radio seeing everything you post makes it easy to get it working. Now it's a $200 Kyosho (Money-Pit) Mini-Z (and the FlySky plug in bit).
Hi you make grate videos on the noble thy have helped me out, now I'm having a problem got a fhss module for my miniz but fallowing al your update tutorial wen i going to bind i got a message module not inserted o module fail have updated to the 3 lates firmwares algo gon thinthe hobby shop they Open a new module and still having tha same masaje last nite i open the remote and check the part where you insert the module used a multimeter afte removing the battery and check for continuty between the bord ande part that holds the module all six points shoin god conection to the main board i dont know what els to look for
It's a strange one I've set a good few of these up with people but never seen that message, what firmware do you have installed ?
Fist the 2.0.102 FCC then normal, then I downgrade to 2.0.99 normal then 2.0.100 then 2.0.101 ant then black to 2.0.102 all having the same massage
@Tomzak11 so you should be in the latest firmware 2.0.102 but if your getting an error it's most likely that something is not connected to the bottom port that the frm005 plugs into or the frm005 is not pushed all the way in, have you checked the port connection inside the grip to the board?
Yes all is working check connection module is well inserted we have Trude 2 diferente module both gets no connection
@Tomzak11 after you updated the radio did you get the prompt to update the rf module?
Great video. But my assistant doest see My remote? It says no operation
Try another usb cable not all have the data ports connected
Thanks for the help
No worries :)
Just subscribed since your videos are super useful. Little question though, you said you chose the non fcc, version because you have no range issues, is the fcc version limiting the power output for the noble?
Edit: just read it in fa website the fcc version has 20% more range.
Yeh more range as it runs higher power but you get less battery life, it's also not legal for use anywhere other than USA states that fall under FCC rules for RC ground transmission, if you want crazy range you can use the range extender with both nb4 and noble pro :)
For once the FCC rules aren't a bad thing. lmao
Hi,
Does the RM005 module need to be inserted at all times? Mine disconnects with the Readyset when removed.
Yes if you want to run the ready set then it's using the rm005 to transmit to the rtr if you remove it then it can't connect
Hope you can help. I just upgraded to the FW2.0.100 firmware but when re inputting my models back into the NB4 none of them work with the receivers. Any ideas?
Using another non updated NB4 still works perfectly.
You need to re bind when you restore the memories :)
Also what version did you come from if it was below 2.0.93 you will need to update your receivers firmware if you look through my playlists for the NVR receivers you will see how to do each one :)
@@WTFRCCars It was from 2.0.93.
So if I move the model list from one controller to another via Flysky assistant I have to rebind every model?
Spoils the point really.
Yeh you have to re bind as the receiver binds to the controller so other controlled can't interfere with it :)
Yes