Hey Mike, just wanted to say thank you like everyone else. In the beginning of my learning adventure, your videos helped me out the most and made it seem doable. Eventually I got my business going (It took a lot of mentorship, studying and banging my head)... there were lots of trial & errors, but If I paid close enough attention and studied up on your videos, I found a lot of answers in your videos. Fast forward, i don't know everything - but business is doing just fine and sticking to my wheelhouse i have had a lot of happy customers. Want to thank you for helping me get going, even when you don't even realize it. Recently encountered a 19 Wrangler (Push to start flip prox w/ sip22 blade) and couldnt find the can hi or lo behind the glovebox, but gateway module was right behind OBD port so i went with 12+8 on that one. Customer was in a rush so I didnt spend much time, but i couldnt find the wiring pair behind the glovebox on that one.
So does connecting to the 12+8 do the same as connecting to the hi low...? Can you do one or the other...? Or do you have to use the brute force cable on some vehicles...? Thank you.
@@gb7886 yes both do the same thing. The 12+8 plugs directly into the gateway module (2 plugs). The gateway module is sometimes easy access. It is the easiest way. When the gateway module is hard to access (behind instrument cluster or radio), you instead talk to the gateway module using the canbus hi/low with the brute force. Anywhere there is a canbus harness, you can tap into the hi/lo and communicate. Sometimes they are behind glovebox, sometimes kick panel, sometimes behind headlight switch, sometimes in headliner. So SGW 12+8 is my preferred method cause its plug n play easy. But canbus brute force tap is best when the SGW is hidden deep in the vehicle.
Muy buen video Mike. Tengo que hacer una smart key para una 2020 Ram 1500. Me pregunto que cable necesitaré. Ese que acabas de mostrar, el ADC2011 o el 12+8 FCA. Te agradecería mucho si pudieras ayudarme con esto. Muchas gracias y saludos.
Great video, I've been able to successfully make remotes this way with my x100 pad 2. However we have this 2018 Chrysler 300 at our shop and when we opened the door the alarm was set and the customer lost the keys. Now due to the alarm being activated I can't get the pin code or communicate with the vehicle. Is there way to deactivate the alarm and use the x100 pad 2 or am I going to need another scan tool? Thank you
Hi, nice and very clear video... I have a quick question, though, i have 2021 ram 1500 classic, i found the star connect and tap the two wire you showed but cant get the pin. I think it 5 rolling pin for this model not 4.
I just unlocked a used 2020 Ram key and programmed it with the smart pro. I will try the Autel next time, yea forget that brute force cable and get the AD cable. 👍
es differente para different maquinas como para el autel se connecta al obd y el connectador de estrella..cuando usas el autopropad solo se acupa connectar el brute force cable
Hola amigo ese mismo cable adaptador se puede utilizar con im608 pro o cualquier scanner te pregunto por qué el im608 pro trae un adaptador pasaresido pero tiene 6 cable y no especifica cuál usar
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
I got XHorse products after I starting watching your channel. I got a Key Tool Max Plus , just finally ordered the 12+8 bypass cable for that black box , so I can get my PIN number for 2018 Ram 1500 Big Horn. Problem is finding that black box (I believe it’s called FCA). I looked all over online and it seems that black box (to hookup the 12+8 bypass cables) seems to be just about anywhere. From the left by the steering column to the middle behind the radio or the far right passenger side under the glove compartment. If you got any advise I would appreciate it. Thank you for the awesome & educational videos!
The reason for connecting your key programmer to the star connector and not to the OBDII connector is because of the gateway module, isn't it? Thank you
HELLO, COULD YOU TELL ME WHICH KEY PROGRAMMER IS THAT YOU ARE USING AND WHAT DO YOU THINK OF THE XTOOL D8 PLEASE I KNOW VERY LITTLE ABOUT EITHER OF THESE TOOLS BUT I DEFINITELY HAVE THE NEED FOR ONLY ONE OF THEM THANK YOU?
Yes u can! Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
If I am using an XHorse Key Tool Max Plus with the 12+8 bypass cables, on a 2018 Ram Big Horn . To program a couple new key fobs. You got any videos or tutorials for that? I have looked online for locations on that black security box called FCA, to plug 🔌 the 12+8 bypass cables into. But numerous sites & videos show that the FCA black box could be anywhere from the left side to the right side to behind the radio to behind the dashboard. Is there a way to find out exactly where the FCA black box is without tearing the 2018 Ram 1500 Big Horn apart?
Buenos días muy bueno tu Vídeo y de mucha ayuda una pregunta cuando remplaza todo el conector de start dash c9 se tiene que programar algo para que encienda el carro ? Muchas gracias de ante mano
How are you, great greeting, thanks for sharing, your videos are very cool.. You use the 12 + 8 cable.. Only two red and black cables are connected for programming, do not use the OBD2 port, thanks, this programming is can use the Autel im608
When i picked up my basic two years ago it didnt have the update.. Wich basically came out last year .. and if you saw the old Autopropad vehicle list coverage website page you would see that it says yes .. old style not new style key.. but yes i saw the video by Autopropad.. so yes your correct my apologies
@@MYKEYSAUTOMOTIVE ok i will let u know what happens when i take it dodge dealership cause they keep saying they dont know if they will be able to reprogram the same key if the problem was wiped from the key fob
It came with out icons but i sent it in for a repair and they fixed and replaced my software..when i checked it had icons ..but this is on my autopropad full version ..the one in this video is the basic ..has no logos :((
Bumblebees and Christmas trees! Hence: Yellow and Black wiring....(Can Low) ...and Red and Green wiring...(Can High) match those colors up, and Ur Good!
I Believe I Remember You Had A Video On You Using The Autel 608 Pro With The Brute Force Bypass Cable& I Had To Suscribe Or Something.. When I Finally Got The Machine& Am Ready I Can't Find The Video.. Will 608 Pro Pair With Brute Force Cable?
So when i use a adc 2011 cable do i unplug obd2 cuz yesterday it failed for 2023 caravan ... didnt have 2023 carvan in im508 options so i acted as if it was a pacifica same key also....?
Lishi only ! Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Everytime I use my Adc 2011 cable with my Autel im508 to do 2018 & up dodge charger or challenger r/t or scatpack it it tell me password reading not supported but when I do the 2018 2019 or 2020 dodge Ram 1500 trucks whick I’ve done many proximity keys for it always reads the password & programs the key successfully so is the rfh hub blocked on the higher performance Chrysler vehicles?
Lishi only ! Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hy miky I've tried this cable with my IM508 and the other cabl ADC but never worked for me? I've to keep using the 12+8 cable. Any other salutation or back probe?
Many times I have found myself watching the videos you produce to help me get the job done. I really appreciate all you do. Thank you!
You are so welcome
Hey Mike, just wanted to say thank you like everyone else. In the beginning of my learning adventure, your videos helped me out the most and made it seem doable. Eventually I got my business going (It took a lot of mentorship, studying and banging my head)... there were lots of trial & errors, but If I paid close enough attention and studied up on your videos, I found a lot of answers in your videos. Fast forward, i don't know everything - but business is doing just fine and sticking to my wheelhouse i have had a lot of happy customers. Want to thank you for helping me get going, even when you don't even realize it. Recently encountered a 19 Wrangler (Push to start flip prox w/ sip22 blade) and couldnt find the can hi or lo behind the glovebox, but gateway module was right behind OBD port so i went with 12+8 on that one. Customer was in a rush so I didnt spend much time, but i couldnt find the wiring pair behind the glovebox on that one.
Hey im Glad your doing good keep up the great work! Blessings to you and your family!
So does connecting to the 12+8 do the same as connecting to the hi low...? Can you do one or the other...? Or do you have to use the brute force cable on some vehicles...? Thank you.
@@gb7886 yes both do the same thing. The 12+8 plugs directly into the gateway module (2 plugs). The gateway module is sometimes easy access. It is the easiest way. When the gateway module is hard to access (behind instrument cluster or radio), you instead talk to the gateway module using the canbus hi/low with the brute force. Anywhere there is a canbus harness, you can tap into the hi/lo and communicate. Sometimes they are behind glovebox, sometimes kick panel, sometimes behind headlight switch, sometimes in headliner. So SGW 12+8 is my preferred method cause its plug n play easy. But canbus brute force tap is best when the SGW is hidden deep in the vehicle.
THANK YOU SO MUCH EVERY OTHER VIDEO SHOWED
THE Y CABLE STYLE AND THIS IS THE ONLY VIDEO I FOUND TO USED THE CABLE I BOUGHT...
Glad I could help
yu arethe best one so far in UA-cam, thanks a lot for your videos.
ThAnk you Allen
one of the better informative videos i ve seen great job
Great video! Lots of useful info and no bs.
Glad it was helpful!
Muy buen video Mike. Tengo que hacer una smart key para una 2020 Ram 1500. Me pregunto que cable necesitaré. Ese que acabas de mostrar, el ADC2011 o el 12+8 FCA. Te agradecería mucho si pudieras ayudarme con esto. Muchas gracias y saludos.
Same for hellcats or do I gotta connect to the obd?
Great video, I've been able to successfully make remotes this way with my x100 pad 2. However we have this 2018 Chrysler 300 at our shop and when we opened the door the alarm was set and the customer lost the keys. Now due to the alarm being activated I can't get the pin code or communicate with the vehicle. Is there way to deactivate the alarm and use the x100 pad 2 or am I going to need another scan tool? Thank you
Try disconnecting the battery for 12 hours
I have the same problem on a jeep renegade cant deactivate alarm
Hi, nice and very clear video...
I have a quick question, though, i have 2021 ram 1500 classic, i found the star connect and tap the two wire you showed but cant get the pin. I think it 5 rolling pin for this model not 4.
You might be right .. or possibly not connected correctly
The smart pro cable plugs in directly works great, also I did a 2020 Ram with im608 but you can’t use unlocked keys must be factory brand new
Is that the chrysler bypass cable for xtool? If not Could you provide a link for the cable you're speaking about
thraxamill 79 it’s the smart pro Chrysler cable it’s $55 and can be used on any programmer American key supply is sold out try UHS Hardware
@@qicpic007 Thanks..... just to be sure is this the item no.?ADD-ADC-2011
thraxamill 79 yes that’s it works with the im608 and auto pro pad for me
I just unlocked a used 2020 Ram key and programmed it with the smart pro. I will try the Autel next time, yea forget that brute force cable and get the AD cable. 👍
Does it work for autel im 608 ?? I'm working on 2021 ram promaster 2500 , thanks
Aquí empezó mi carrera como cerrajero thank you
Gracias a ti bro !
Thanks for the video, I used Lonsdor k518 it's very good too, it's taken me less than 10 minutes.
Good machine! Heard nothing but good things about the lonsdor
Will this work with the km100
No
Maybe with bruteforce cable or 12+8
Thanks for the reply
But yes i have the km100 and the brute force cable same one in the video i just haven’t tried it
Hey did you try using it
MUCHAS GRACIAS por esta importate informacion Pregunta .no tieness videos en Espanol
Hola juan como estas!! Mandame un email lilroxx001@yahoo.com
Para programar llaves perdidas, se conecta cable al puerro obd2 o se sigue haciendo desde el conector del Video?
es differente para different maquinas como para el autel se connecta al obd y el connectador de estrella..cuando usas el autopropad solo se acupa connectar el brute force cable
Very nice explanation, blessings
Glad it was helpful!
Hola amigo ese mismo cable adaptador se puede utilizar con im608 pro o cualquier scanner te pregunto por qué el im608 pro trae un adaptador pasaresido pero tiene 6 cable y no especifica cuál usar
Si!
@@MYKEYSAUTOMOTIVE hola amigos de my keys que color se ocupan en el cable adaptador de im608 ??
Excellent video. Thanks!
Thank you for the support!!
Hello mate. Good to see you again.
Thanks For the video that help me a Lot
Glad it helped
Thank you for this video! It helped me a lot! I look forward to seeing more!
Thank you for watching! Im glad you liked it !! Take care!!
Can you do a similar procedure using XHorse devices to make another key fob for a 2018 Dodge Ram 1500 ?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
I got XHorse products after I starting watching your channel. I got a Key Tool Max Plus , just finally ordered the 12+8 bypass cable for that black box , so I can get my PIN number for 2018 Ram 1500 Big Horn. Problem is finding that black box (I believe it’s called FCA). I looked all over online and it seems that black box (to hookup the 12+8 bypass cables) seems to be just about anywhere. From the left by the steering column to the middle behind the radio or the far right passenger side under the glove compartment. If you got any advise I would appreciate it. Thank you for the awesome & educational videos!
I gotta connector from the junkyard so I could just plug it into the star connector thought that might help you out.
Thank you !! Yes sir!! Indeed thats a great idea!!
Thanks you siempre de gran ayuda, good bless you bro.
Gracias a ti Marco!! Bendiciones cuídate!!
The reason for connecting your key programmer to the star connector and not to the OBDII connector is because of the gateway module, isn't it?
Thank you
Yes
Im so glad i have witech..
🙏🏼 thank you
can someone please explain how to unplug the green plugs going into the obd star connector please
Thank you very much brother. You are awesome
Thank you im glad you liked this video!!
HELLO, COULD YOU TELL ME WHICH KEY PROGRAMMER IS THAT YOU ARE USING AND WHAT DO YOU THINK OF THE XTOOL D8 PLEASE I KNOW VERY LITTLE ABOUT EITHER OF THESE TOOLS BUT I DEFINITELY HAVE THE NEED FOR ONLY ONE OF THEM THANK YOU?
I only reply to members!! My apologies!
غير جيد اشتري جهازlanch...or....maxam808
So ANY dodge under 2018 doesnt need thoes bypass cables right? You can jus do it through the OBD port correct?
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
Wait what? It was just a question.
If the security alarm is armed / or going off can all keys lost still be preformed ?
I have the T-Ninja 1000 programmer, Will the star cable work with my machine or do they make one for it? Thanks
With most programmers yes it will work!
do you have to remove panels to get that green connector piece out??
Yes
You are the Best!
Thank you Alan! Your the best!🙏🏼❤️💪🏻🥇
Sir I'm buying xtool 12+8 cable adapter...sir will it work with xhorse mini obd ?
It should
Do you know where’s the one for the ram 1500 2020? Thanks
Yes
Hola amigo
Donde puedo comprar ese cable ??
Gracias!!
Americankeysupply.com
Uhshardware.com
Locksmithkeyless.com
Can you buy this brute force cable for the Autel im508 or im608? I have the 12+8 SGBC but I heard the brute force is easier
Yes u can!
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Thanks this video saved me.
Brother thank you!!
Can i use km100 with out obd
What's you're thoughts on the $450. Autek programers? Also you're thoughts on the "new" Xhorse table plus?
I heard autek is ok but i would def go with autopropad or autel
If I use the km100 do I need to plug in obd port on dodge or can I just plug the Vci into adapter
If I am using an XHorse Key Tool Max Plus with the 12+8 bypass cables, on a 2018 Ram Big Horn . To program a couple new key fobs. You got any videos or tutorials for that? I have looked online for locations on that black security box called FCA, to plug 🔌 the 12+8 bypass cables into. But numerous sites & videos show that the FCA black box could be anywhere from the left side to the right side to behind the radio to behind the dashboard. Is there a way to find out exactly where the FCA black box is without tearing the 2018 Ram 1500 Big Horn apart?
To be clear, I can reflash the pcm with HPTUNERS??
Im not familiar with hptunees
Buenos días muy bueno tu Vídeo y de mucha ayuda una pregunta cuando remplaza todo el conector de start dash c9 se tiene que programar algo para que encienda el carro ? Muchas gracias de ante mano
Great video mike saludos Ventura ca
Hola Luis!! Gracias!! Cuídate!! Bendiciones Amigo!!
Hi my friend best video I've seen with step by step instructions great job👏👏,My question is can I use a (used) key fob?
No sir you cannot use a used key fob
How are you, great greeting, thanks for sharing, your videos are very cool.. You use the 12 + 8 cable.. Only two red and black cables are connected for programming, do not use the OBD2 port, thanks, this programming is can use the Autel im608
Yes!🙏🏼🙏🏼❤️❤️
Hi The full version of Autopropad can do the 2020 ram new style key or not?
Not new key style
So the uhs lies they have a video promming a 2020 ram new key style?
@@jzgarage7630 send me link
When i picked up my basic two years ago it didnt have the update.. Wich basically came out last year .. and if you saw the old Autopropad vehicle list coverage website page you would see that it says yes .. old style not new style key.. but yes i saw the video by Autopropad.. so yes your correct my apologies
ua-cam.com/video/mS__t7Wysys/v-deo.html
could you use a 2011 cable instead?
can this also be done with the chrysler 12 x 8 bypass cable thru gateway module
Can u reprogram the same keys that came with your car cause some1 tried to take my car and my fob does not work
Yes
@@MYKEYSAUTOMOTIVE ok i will let u know what happens when i take it dodge dealership cause they keep saying they dont know if they will be able to reprogram the same key if the problem was wiped from the key fob
Are there Tokens or a subscription for the Xhorse?
No sir!! For xhorse no tokens!
Thanks bro , youre the best!!
Thank you Dennis! I try! Lol have a great new year!!
@@MYKEYSAUTOMOTIVE feliz año nuevo para ti y toda tu familia !! Dios te bendiga!
Hey quick question how did you get all the fancy manufacturer icons on your autopropad been wanting to know
It came with out icons but i sent it in for a repair and they fixed and replaced my software..when i checked it had icons ..but this is on my autopropad full version ..the one in this video is the basic ..has no logos :((
@@lsimson ok you lost me send an email where?
Mike what does the "Resync Available" part refer to right next to the notes in minute 9:00?
Thats when you change a module .. that lets you resynce new module on vehicle...
@@MYKEYSAUTOMOTIVE Cool. Thank you brother!
Amigo sabes si un 2004 Lexus IS 300 trae el codigo de la llave en el cilindro de la puerta
Si en el pasajero!
@@MYKEYSAUTOMOTIVE para quitarlo hay que removerl el panel de la puerta ? Porque ese no sale como los toyotas
@@danielf1016 si los carros mas viejitos se acupa quitar el panel... los mas nuevos se quitan con un tornillo!
Bumblebees and Christmas trees!
Hence: Yellow and Black wiring....(Can Low)
...and Red and Green wiring...(Can High)
match those colors up, and Ur Good!
I Believe I Remember You Had A Video On You Using The Autel 608 Pro With The Brute Force Bypass Cable& I Had To Suscribe Or Something..
When I Finally Got The Machine& Am Ready I Can't Find The Video..
Will 608 Pro Pair With Brute Force Cable?
The connector bypass cable plug won’t work with xtool ik618, it has to be there cables or 12+8 cable
Buenas tardes compañero me podrás dar los colores de los cables a los q debo de conectar el cable rojo y negro q trae el adaptador
El alambre rojo va ir a el alambre verde/blanco y verde y el negro va ir al amarillo/blanco y azul
Thank you so much by the information
So when i use a adc 2011 cable do i unplug obd2 cuz yesterday it failed for 2023 caravan ... didnt have 2023 carvan in im508 options so i acted as if it was a pacifica same key also....?
ESO es alo que le llaman colgarse de la red can?
Este es el módulo estrella... .. cual maquina usas . con el autel is differente..
And please how can I get the brute force power connector please
Lishi only !
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Nice job!
Thank you sir!!!🙏🏼🙏🏼🙏🏼
Como sabes donde se encuentra la cajita verde
Daniel!! Como estas!! Solamente buscandola!!
Great video thanks!
Thank you Gary im glad you liked it!! Take care!!
I’m trying get a new key program but the locksmith say he can’t read the 4 digit code how he suppose to do it ?
???
Everytime I use my Adc 2011 cable with my Autel im508 to do 2018 & up dodge charger or challenger r/t or scatpack it it tell me password reading not supported but when I do the 2018 2019 or 2020 dodge Ram 1500 trucks whick I’ve done many proximity keys for it always reads the password & programs the key successfully so is the rfh hub blocked on the higher performance Chrysler vehicles?
Hi
Is this auto propad basic ?
Yes sir with brute force bypass cable
if you need internet wifi for read a pin code
Excelente video gracias por compartir
Gracias a ti amigo!! Cuidate ! Bendiciones!!
Hola
Que programador uso para nissan 20pin code
Autopropad
Good video, thanks
Thank you Ronnie!!! Take care!!
Nice video and thank you bro
Thank you for watching!!🙏🏼🙏🏼🙏🏼
Thank you very helpful
hola donde puedo comprar ese cable..?? gracias.
Why you don t use a câble 16+32 ?
Hello greetings friend! 👋🏽 for priority commenting please join our members only club! Thank you!!🙏🏼❤️
Please bro how can I do some two pin red and black
Lishi only !
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Thanks a lot
thank you
Thanks a lot... Appreciate your efforts. Keep up the good work.
Thank you! God bless you!
Dodge neon 2018 Where can I get its port
Canbus cable i have
Can bus interface
Not sure tbh
Do a 2021 Dodge Charger
Is this auto basic propad ?
Yes
Awesome video, helped me i was confused with the directions, Thanks Bro!
Np! Glad i can help!
Just want to confirm, only 2018+ and newer required a cable correct?
2017 Dodge Ram doesn't need one?
That is ........ correct
whre can i buy this tool?
Uhs
Is that the only cable required
Hello has anyone been able to read the pin code of a ram 2500 2020? If so what system was used.
Awesome 👍
MR HAROLD KEYS!!?? Is that you!!??
Hi sir, where can I contact you please?
Lilroxx001@yahoo.com
@@MYKEYSAUTOMOTIVE thanks, I have just sent you an email
@@MYKEYSAUTOMOTIVE hermano no tiene un numero donde pueda llamarte por favor
Exelente explicación yo entiendo ingles puedo hablar pero. No escribir me fayo eso en la escuela 😅😅😅
😅😅🙏🏼🙏🏼🙏🏼🏆🏆🏆
احسنت
🙏🏼🙏🏼
This is how they're taking hellcats
Not worth the jail time
Hy miky I've tried this cable with my IM508 and the other cabl ADC but never worked for me?
I've to keep using the 12+8 cable.
Any other salutation or back probe?
Man i really dont know what to tel you my friend said it worked perfect with his im608 pro could be an update issue.
@@MYKEYSAUTOMOTIVE what do you mean update issue u mean I've to update my tool?
Automatic identify never works for me
:((
Se piede leer el pin con upa
No
Tienes que connectar al modulo estrella
jeep wrangler 2019 need help