2018 Ram Security Bypass Cable Install
Вставка
- Опубліковано 27 сер 2024
- Installing the needed security bypass cable needed on all 2018 and newer Chrysler products. Cable is needed for obd port access for alfaOBD, obd flashers, and other obd programs
UPDATE JUNE 2022: original cable that i used failed. i have installed the other one.
if your looking to purchase one this is a good quality one here: www.zautomotiv...
The best zip tie and wire cutters! no more cut up arms: www.mcmaster.c...
Follow me on Instagram @talbot_industries
thanks for the informative video comrade. and nice g56 manual trans ram truck! they are rare. cheers!
Hey man, I really appreciate this vid. 2018 Ram 2500 here, just put 35's on it and the tire pressure threshold has been driving me crazy. Lil research and I find out about AlfaOBD and OBD Link. grad the part and purchase the program for my laptop. Get everything in, go step by step with vid...I get the "Procedure complete, but status us unknown". For some reason I think that maybe the program and my laptop aren't compatible, so I run to walmart and grab a cheap android tablet. Get home and go to DL the program......windows version and android version are sold separately. F-it, this crap is making me crazy every time I start the truck.......still doesn't work.
I do some more research, your vid pops up. Ordering the cable now. Just wanted to thank you for taking the time to make the video, really helps guys like me.
Thank you again
The Blind Mechanic
(i'm not really blind, but I mind as well be when I try to fix sheeet)
glad this was able to help and hope you get your truck all set!
Thanks for Video. Perfect! And those zip tie cutters are the best!
How about a link for purchasing the cable you like?
It is in the show notes
Thank you for taking the time to film and upload this video.
No problem im glad it helped. if you need anything else let me know!
I just did a cluster swap on my 2018 2500 Tradesman. I thought I could just use alfaobd to change my mileage and hours. Will the single wire one work with what I am doing? Edit: I see your update with the correct harness.
This will not work on a 2018 Ram Ecodiesel, just in case anyone needs to know. I just confirmed that with Thoroughbred Diesel (in your link). Thanks for the video though.
If this doesn't work on 2018 ram ecodiesel do you know witch one would work. I
Thats great man!
As far as I am Concerned I bought the truck its my truck, not the dealerships or manufactures or the banks its mine. And if I want to drive it into a wall and total it, that is on me and no one else. If I want to do a module bypass or module delete so I can reset my tire pressure sensors or my owe repairs. As long as I am not doing any changes that are now illegal (EPA) changes. I should not be controlled by anything or anyone on my owe vehicle. My thoughts on this, I could give three S**ts what the dealer thinks.
I completely agree with you!
Thanks for the video. I am hoping to purchase an OBD module to install the trailer tmps sensor option that comes in the newer models 2021+. Being a 2018 Ram which utilized 3g service to operate is there any worry of someone hacking into these vehicles? I am resistant of purchasing their darn doggie and signing up with a different cellular carrier just for the luxury of the navigation system when I can used my cell phone instead.
Do u read locked pcm with the bypass 1st before u put in the unlocked pcm then use the diablo tool into the bypass and go from there?
The one you don’t like...the z automotive one. It’s stuck on my obd port 🤦🏽♂️
Will this work on a 2018 ram 2500 6.4L gas truck? If so, what is the link to order the correct bypass cable.
yes www.zautomotive.com/product/z_obd_t_long/
Installing that new cable does not work anymore Ram stopped wiring all the extra ports on the white box so you can't plug it in to anything that works.
I got one for my ram off Amazon and I can't connect to my truck
Where did you buy the bypass cable?
Thank you good video
When I installed my OEM brake controller I had to put the Security Gateway Overide module into the port behind the LCD. Does your setup alleviate the need to do that?
i am unsure. sorry
Stupid question. I need to take my 2018 ram 1500 back to dealer. I need to remove the security bypass. How does the bipass clip work (the one thatgoes into the green area) to remove the bipass cable that connects . I dont want to break the connector of the bipass cable. I tried pushing the clip down and pulling back and its wedged in there. Maybe im doing it wrong. Any help is appreciated.
njhotroder the clip in the module under the dash youll see a square part of the connector with a tab inside. That tab your going to push towards the body of the plug. So not towards the square prt but towards the rest of the plug. Hope this helps
I’m not sure really what all would have to be taken out if one would have to take their trucks to the dealer for service but, is it really necessary to leave all this stuff plugged in after programming? I have a Limited trim model so uh, there’s not a whole lot of adjusting I need to do other than a few things so, I could probably knock out all that I would need to do in probably an afternoon.
@@billplaisance6387 you would want to take out the bipass cable man. They can put in the computer that u messed with the ecu and warrenty can be voided if u run into a prick service underwritter. Dont risk it. Remove it. Like i did. U have been warned
Just curious but why is it the place that sells the cable that you are using, says that cable only works with the diesel pickups? I’m just trying to find out what works and what doesn’t work but I emailed the manufacturer of that cable that you were using and they said that that cable was only for programming the ECU on the 2500 and 3500 diesel pickups so, what gives?
take a look at this link www.americankeysupply.com/pages/everything-you-need-to-know-about-the-chrysler-security-gateway
i dont think it matters. only issue may be length of the cable reaching to module however all the rams have it under the dash on the driver side
Talbot_Industries hmm, I don’t know. I’m just repeating what they told me. But I am curious though, how does the cable you used work if it only plugs into one of those modules under the dash when the other cable plugs into both?
@@billplaisance6387 less is more? not sure but i can assure you it works.
Will this work on a 22 2500 6.4 gas Laramie 4x4 CC Short bedI want to use it just for lowering my tire pressure. What all will I need using an iPhone. Thank you 4 ur help
2018 and up needs the bypass cable. im not 100% sure the 5th gen have the connections in the same location. alfa obd does not support iphone unfortunately
I need to do all that just to program a new key fob? I ask because I’m not mechanically inclined.
if your truck is a 2018 or newer yes you will need the security bypass in order to program
Where can I purchase the cable that you like and what company does it come from and under what name thank you
Michael Staffieri www.thoroughbreddiesel.com/68000u/?gclid=Cj0KCQjw0brtBRDOARIsANMDykbr5hMsnj6exQIuUF-RMLBwpdCQYg6EXcunNkd6YWGdAHYeERaZqB0aAnUdEALw_wcB
I just called this company and they said it won't work on my 2018 6.4
@@71davidRedneck i personally do not think that the cable is gas/ diesel dependent. 2018 truck have the security module regardless of engine
Question.... when you talked about unhooking all this for service at the dealer- what all has to be unplugged/removed from the truck? Will the dealership not be able to communicate with my truck’s computer with all this plugged in? But I have a 2018 Limited 1500 so I’m assuming this is the same on mine?
@Bill Plaisance they should still be able to connect to it but there is always the chance they may have issues. i look at is as if the know it there they will have the suspicion that you have been into the computer. if you were to unhook it just remove the harness that was installed.
I’m a certified Chrysler technician, if you still have warranty on your vehicle there is a chance that a bypass will void the warranty. This video shows the bypass being pinned into a BUS bridge ( star connector), the actual module is a security module designed to keep your warranty intact and unauthorized (not certified Chrysler personal) out of the vehicles system. My advise would be to wait until your factory warranty has expired before messing around with the electrical system. If the bypass isn’t installed correctly or if it does not work, this may result in a no crank no start condition as the vehicle security gateway is doing what it is designed to do. Hope this helps anyone thinking of installing this or a similar device in their vehicle.
@@stephenpacheco7873 so there's a chance if something is wrong with the bypass, the cable or just not being hooked up right that it can keep my truck from starting? Thats certainly a bummer of a possibility but what about people with lifetime warranties through mopar mvp? My factory bumper to bumper warranty ended back in December so the warranty I paid for at signing will be for as long as I own it.
@stephenpacheco7873 I have a question for you my truck is out of warranty and I have an engine light on and I can't reset the codes with my snapon computer how do I get in to do so if it's locked .legit question
@@JeremyHellums-jx2qi so, do you or do you not have one of these security module bypass cables? Either way, your Snapon code reader should be able to access the codes on your computer. I have a little Bosch brand OBD II code reader that worked just fine with my truck before I even put one of these bypass cables in here.
Where did you order the bypass cable in the video? And do you know if it’s just your vehicle and only need the one plug for the CAN module? I’ve looked at another one for my 18 ram 1500 but it has two of the CAN module plugs
ive seen cable with 1 and 2 plugs. there is a link in the description to one that ive used and works well
@@Talbot_Industries I was hoping you had a link to the one you used in the video as I like how clean and simple it is
@@robertj5663 that one came in a kit as part of something else and i have bot been able to find it separate. however that one failed this summer and im now using the other one.
@@Talbot_Industries what was the purpose for yours? Im needing the bypass as I am about to tune my truck. But I talked to Z and they said they don’t recommend using the one you have cause it might not bypass all items needed so they only recommend the module plug that goes behind the radio.
@@robertj5663 ive used it for tuning, flasher modules, alfa obd
Can I put this cable on a 2022 ram 3500 dually? I’d like to update the fuel tank size to the larger 50 gallon aftermarket
i dont have any experience on the 5g trucks so not 100% sure. sorry
Nive vid man
I purchased the cable from your link. Oups! it does not work with a 5.7 hemi engine. I spent $116.00 for nothing,$ 33.00 for the cable $ 52.00 for shipping $ 18.00 for duty fees. WOW and nothing works. You should take the time to try before you say it works regardless of engine, dont you think ?
Can u return it?
Hello, with this bypass I can reflash with HPTUNERS??
yes i dont see why not
I wish this would work for locksmith, can’t even program keys without doing a 12+8 bypass to security module. And when it’s behind the infotainment it’s a just a bitch. Dodge use to be one of the easiest to do, loved getting the calls up 2017 then this shit starts. Fuck you dodge
I am a former locksmith looking to start a mobile unit in town. Seeing these newer Dodge videos 2017+, I won't touch them. Of course with practice and everything I'm sure it's not that bad, but some say you have multiple locations as to where the port needed to tap into could be. And I'm all about getting in and getting out, not hunting around a vehicle for a port. I'll stick with only do 16-17 and down. I realize I'll miss out on some calls but until it's evident that those are the vehicles that I'm missing the most $$ on, I'll say pass and move on to the next job.
Will the Ezlynk bypass cable work the Alfaobd mx+ or do I have to buy another bypass cable
it will work
where did you buy this first cable ????? i need one thanks easy install not to much to remember
i believe this one came with my ez link. i actually just swapped over to the other one which doubles as a splitter to free up my obd port. either style works
@@Talbot_Industries many thanks for your reply . Your awesome for replying and prompt . I will try this 👍👌👋
Why are you installing it to stay forever? Just plug one end into the existing OBD and plug the other to your tuner and plug the single thing into the green and tube your truck. Once the tune is on the truck you don’t need to keep this in your truck? It’s only for when you are tuning. Why are you installing this to stay in the truck like all the time? I’m confused? It takes 30 seconds to install it quick and tune the truck and then take it out. That way the dealer would never see it
ok thanks for this! I was wondering the same thing. But was afraid I was missing something. I guess if you are plugging in OBD's all the time. But for tunes.
GR1REAPER... I know it's been awhile since you asked this, but I thought I'd jump in and answer. It is not necessary to keep the bypass cable hooked. It is only needed when making the truck computer changes. This guy is keeping it hooked up in case he wants to make other changes at another time. Nothing more. I am sure he remove it when he is satisfied with all changes or he has to make a service run. Hope this helps.
So if you have 2 trucks you only need 1 cable ?
would you want to sell the other security bypass cable
Where you bought both adapters
link in description
Where did you buy the bypass cable please
this is the one i use now www.zautomotive.com/product/z_obd_t_long/
Is this bypass cable only for diesel trucks ? I have a 2018 power wagon
it should work on 2018 models regardless of engine configuration
@@Talbot_Industries is it the same to program A Jeep Wrangler with the Alfa obd
@@71davidRedneck to my knowledge all 2018+ Chrysler products will need the bypass cable. however the location of the module may vary by model
My Jeep is 2015. My question is the step by step instructions the same for jeep
@@71davidRedneck 2015 will not need a bypass cable
this kills the security on the vehicle !!!!
Where can I buy the cable you used ?
cale keeler www.thoroughbreddiesel.com/68000u/?gclid=Cj0KCQjw0brtBRDOARIsANMDykbr5hMsnj6exQIuUF-RMLBwpdCQYg6EXcunNkd6YWGdAHYeERaZqB0aAnUdEALw_wcB
Where can I buy the cable for a 1500 with a 5.7 Hemi?
teon39 can buy from link above. Cable should be the same for 1500-3500. Only needed on 2018 and up
They told me it won't work for my 2018 6.4