How to Replace CV Axle Shaft 2005-2010 Chevrolet Cobalt

Поділитися
Вставка
  • Опубліковано 16 чер 2022
  • Buy Now!
    New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAXS00191
    This video shows you how to install a CV axle shaft on your 2005-2010 Chevrolet Cobalt. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
    This process should be similar on the following vehicles:
    2005 Chevrolet Cobalt
    2006 Chevrolet Cobalt
    2007 Chevrolet Cobalt
    2008 Chevrolet Cobalt
    2009 Chevrolet Cobalt
    2010 Chevrolet Cobalt
    Tools you will need:
    • Pry Bar 1aau.to/ocv/1AXAA00020
    • 14mm Socket 1aau.to/ojN/1AXAA00015
    • 15mm Socket 1aau.to/ojN/1AXAA00015
    • 18mm Socket 1aau.to/oei/1AXAA00043
    • 19mm Socket 1aau.to/oei/1AXAA00043
    • 30mm Socket
    • Brake Caliper Hanger 1aau.to/oJ/1AXAA00084
    • 1/2 Inch Air Impact Gun 1aau.to/oau/1AXAA00252
    • Air Chisel 1aau.to/oj/1AXAA00270
    • Ratchet 1aau.to/okN/1AXAA00016
    • Socket Extensions 1aau.to/ojN/1AXAA00015
    • Torque Wrench 1aau.to/ogc/1AXAA00044
    • Brake Grease
    • Brake Parts Cleaner
    • Cloth Rags 1aau.to/oa9/1AXSS00035
    • Copper Anti-Seize
    • Rust Penetrant
    • Center Punch 1aau.to/o6/1AXAA00055
    • Hammer 1aau.to/ocw/1AXAA00091
    • Magnet - Extendable
    • Wire Brush 1aau.to/oaE/1AXAA00079
    Subscribe: / @trq
    Check out our playlist:
    Chevy Cobalt 2005-2010 1st Generation: • Chevy Cobalt 2005-2010...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 18

  • @TRQ
    @TRQ  2 роки тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @oldandornery
    @oldandornery 8 місяців тому +1

    Thank you for the video, Sir! It's been 10 years since I've had to change a CV joint, but I have to do so now. I came across your video on the Google machine, and now I have 100% confidence to do the job. 1,001 Thank You's to you, Sir!

  • @user-fc8gn2rj2b
    @user-fc8gn2rj2b 6 місяців тому +1

    Thank you carnal, I did that job watching your video, thank you very much, greetings from here in Pennsylvania!!

  • @TerrenceWFunk-ex6qd
    @TerrenceWFunk-ex6qd Рік тому +2

    Wow, incredibly thorough, paced, but easy to follow / learn. I will definitely be back to watch more vids from this guy.
    Dauphin, mb

    • @TRQ
      @TRQ  Рік тому

      +Terrence W. Funk Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

  • @richmeier
    @richmeier Рік тому +10

    How did it magically get a new wheel hub bearing assembly?

  • @rajendramodusu5980
    @rajendramodusu5980 Рік тому

    Superb super easy one of its kind video

  • @zanescanlon8743
    @zanescanlon8743 4 місяці тому +1

    What’s the name of the female connection into the transmission, and how is the best way to remove it

  • @jimgarthoff6319
    @jimgarthoff6319 Рік тому +3

    What is the name of the short shaft that goes into the transmission before the cv axle?

  • @realmearthheaven6576
    @realmearthheaven6576 10 місяців тому

    Good info. I will say though that car is deeply rusted.. I wouldn’t trust the struts or tie rods 😬

  • @punkrockloser7
    @punkrockloser7 2 роки тому +2

    Not being picky but the next tech is going to get screwed with all the red loctite..
    Hes going to have to heat the caliper bolts, strut bolts and axle nut.
    Otherwise job well done.

  • @tylerdurden9748
    @tylerdurden9748 Рік тому +2

    do you drive through acid everyday?

  • @pedrogarrido4105
    @pedrogarrido4105 Рік тому

    Do you guys know if this pair of axles works for a 05 2.0 s/c chevrolet cobalt?

  • @ntamichael9343
    @ntamichael9343 Рік тому

    Great job! I am working on a 2016 cobalt today, front shaft, also one of the front passenger side caliper is getting hurt, will need to check it out, oil change, and some bushings.

    • @DeltaH-9
      @DeltaH-9 Рік тому +10

      No such thing as a 2016 cobalt.

  • @matthewfire6161
    @matthewfire6161 3 місяці тому

    Really kinda agonizing to see a wire brush, even if its copper, brushing onto the brake caliper piston boot/seal like that. Lol

  • @abdelmajidamal145
    @abdelmajidamal145 8 місяців тому

    🇲🇦🇲🇦👍🇲🇦🇲🇦