Worlds Biggest RC Car gets GIANT Engine (5x power)
Вставка
- Опубліковано 14 жов 2024
- We fit a giant engine into the worlds biggest and baddest Rc car - the Primal RC Game Over Monster Truck.
🚗Win Truck here ($6,300 cash alternative) raffall.com/36...
Win one of my other cars raffall.com/ke...
Buy Game Over Truck Here primalrc.com/k...
Taylor Engine www.taylorrc.c...
Perfect Pass Servos www.perfectpas...
Yes Mate Channel / @yesmatercmann
🎓Kevin's 11 steps to work from home - eBay Powerseller Blueprint kevtalbot.clic...
👕Game Over Clothing teespring.com/...
🚗My RC UA-cam Channel - / @kevintalbotrc
🧡INSTAGRAM / talbotkev
❤️TICTOK / kevtalbot
💙FACEBOOK / kevintalbotvideos
💚RUMBLE rumble.com/use...
🚗Kev's RC Basher School - kevin-talbot.t...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Most videos are RC Cars, business, Amazon FBA, eBay, Monster truck, Cars, insurance, cryptocurrency and other topics.
subscribe!!
#Kevintalbot #rccars #rc
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
🚗Win Truck here ($6,300 cash alternative) raffall.com/362583/enter-raffle-to-win-game-over-taylor-71-engine-6300-alternative-hosted-by-kevin-talbot
Project worlds fastest primal raminator?
I wish these trucks weren't so expensive, I've always wanted one since they came out. I've never entered any of your giveaways. Are they secure? Or will I get blown up with spam? Thanks Kev🤟🏼
Hey Kev. For the extended hexes, just take a Dremel and grind a little flat spot on the center of the pin so it can't escape past the set screw.
❤❤GOTO PRIME THE ALLOY WITH THE CORRECT BONDING PRIMER BEFORE GOING WITH YOUR BLACK PAINT.
Me
I have 20 years experience tuning 2 stroke engines. The key is to start with the base tune given by the manufacturer. From there you would adjust the idle first as the low side will affect the high side tune. After you get it to idle nicely without stalling, hold it in the air/ take the wheels off, hold wide open throttle and adjust the high side rich until you hear the engine change rpm (starting to bogg). Then adjust back lean just to the point where it picks back up. That's the sweet spot. It's also a good idea to mix your fuel a little rich (oil) as the only down side is a bit of a mess, not enough and you will burn up the engine. Same if you run the engine with too lean fuel settings.
@@nick-bh5qs this right here. Patience is key as well for proper low side tuning, it needs to sit at idle for a bit, listen for a change in rpm with the throttle in the closed position, then apply WOT. If it quits right away, it’s too lean, stumbles then revs-too rich. Get the throttle response correct then tune high needle.
717miaka
Yes exactly what you said and I was gonna add that you gotta make sure to tune it with the Air filter on. Alot of 2 strokes run different once you throw the Air filter on.
This right here 1000%
That's how I learned how to tune gopeds. Works really well and rips way better.
Love the cat getting involved 😅 typical orange cat🙄😂🤣
Yep our ginge marbled bengal has to be involved in everything 😂
"the cat distribution system" strikes again....
We use to have a orange cat 🐈 that greeted everyone in my neighborhood. It was my neighbors cat but I would yell “I need to speak with Sampson!” And he come running lol
Hilarious 😂😂😂
After seeing you tear into those boxes I'm not surprised cats started showing up.
lol
No one enjoys a proper unboxing like a kitty cat😮
Just my opinion: I have broken in loads of engines, and there is a break-in period before it levels out before you "fine tune" the carb. Run rich for 4 or 5 tanks (lots of white exhaust). It is VERY important that the engine stays cool during these 5 ranks. Also, during this break-in period, you should not jam the throttle. No more than 50% at most. Tank 6, lean out the carb 1/4, turn for another 1/4 tank, and repeat. Once the engine engages the power band within 1.5 - 2 seconds, then it's close. Open the needle (rich), just a smidgen. This will allow the engine to idle nice and low. You still should have some good smoke when punching the throttle. Less smoke = HEAT, amb that will BOG the engine when you slam the throttle. I would LOVE to have one of these. So cool, and I love your channel, Kev!
He does not care
He just puts the hammer down 😁
Kevin, take one of the old raminators and add a mower deck on it. Baddest lawnmower on earth.
I like the sound of that idea
He could put the helicopter blades on the bottom too
Honey kev shrunk the kids
@@YoBoyRolling_slugtop and bottom, make a drone that can mow the yard 😅
Me ples
that cat is too adorable man, ginge is a keeper
Hi Kevin #1 Don't use that octane boost untile engine is set up correctly. Also your carb is to lean also
#2 check all carb gaskets for air leaks.#3 I also noticed your exhaust pipe is bouncing around to much you will break your header off if you keep it that way. Install a rear exhaust stinger mount to fix that issue. Happy r/c my friend.
Next time you paint them use engine paint, then bake the parts.
Starting with warm parts helps as well.
Several coats then in an oven for 30 mins at 250f, repeat twice more.
The FDS has struck again.
Feline Distribution System.
3:55 Hey Kev, if you are going to paint aluminum, you need to use an iron oxide primer and then anything will stick to it.
lmao get ready for the sandblaster haha
A cats purr is soooooo soothing.
an idea for your tuning, by the way it cuts at higher rpm , it could be worth checking that the fuel tank is able to supply the fuel consistently. perhaps the breather valve / hose isn't allowing the pressure in the tank to be even or a vacuum when the engine requires more fuel it is having too much effort to suck it from the tank? at low rpm or starting the fuel can be drawn slowly but higher demand is causing a vacuum and making it lean and cut out.
and with the larger engine maybe the fuel line isn't big enough?
@@muskokamike127 Great point. Also agree with above comment regarding vacuum effects choking engine at higher rpm's.
This is tthe ansswer!!!! Fuel flow!!!!!
I remember being excited for my upgrade from a .12 to .15 nitro engine back in the day...a truck/engine this size wouldve made my head explode lol
Same here man when I got that upgrade for the og stampede 27 or 30 year ago 😂 my head would of popped too even seeing a rc this big
@@xwixsticky Same time frame as me, except I had the Traxxas Nitro Buggy...I remember wishing I had gotten the Stampede lol
I bought my 1 year old his first rc for $20 and he loves it. I cant wait to work up to a raminator over the next 15 years
I think that cat has claimed you as its own
oh no!
Yup. Kevin your now his pet and he's now ypur owner. There's no going back lol
124enzo@
22357e não
Xcvhv@234675/
We got hooked up with him in the states here and got his 40cc his 71cc supreme and the bad boy diablo 88cc that last engine was insane. Taylor really knows 2 strokes. Hes a super super friendly guy good business man also. I wonder if his twin is out yet or not. I've never heard another rc engine perform like his. Wait till that things up on the pipe thats when she will blow your mind. Awesome build.
Badass!!! You need a foam filled fuel cell to keep the fuel flow constant during negative G’s that pulls fuel away from the fuel line outlet.
It's sounds so good with silencer, sounds like a 125 dirtbike
You have to mix the fuel perfectly! If not mixed right. It will do everything you are having problems with!! Love the truck.
Wow, I learned so much about road safety from this!
Attn, Kev, Birchwood Casey Aluminum Black, works like gun blueing but for aluminum, the aluminum must be bare, no clear coating on top or it wont work
I love the effort that you put into these amazing videos
We need a scale monster truck arena for it !!!
yes!! when I get some land one day
Can't believe we got to chat !!! Me and my girlfriend love your videos.
@@michaeltaylor1985lucky man,I have had a chat like this with kev back in 2022 or maybe in 2021❤😘
@Indiantanker583 me too have chat with kevin talbot 🎉 Love from sri lanka ❤🇱🇰😁🎉
Use a piece of heat shrink tubing on the hub pins.🤔😉 Also, engine should be run rich for a full tank of gas before trying to tune.
you have alot of badass hobbies
That spray painting hurt my soul.
I remember when I was a full grown man and didn’t know how to spray paint something
Primer?! Even operations that put MIL Spec, high solids urethane paint on military use metals either forget, or do not know to use primer. Even though it is both on the purchase order and the spec drawing. I think the vendor does not speak English. Shocker. Paint peeled off, and we got some angry emails. CofC said they used primer. Can primer be completely clear?!
to get less chips is used 2 coats primer sand each coat get smooth finished , wait day for primer set hard sand then add color i do 2 coats let dry a day sand then add couple coat of clear you set if want last long time if don't add clear it peel off every time hit sumthing.
Gaaaaaaarfieeeeeeeeld!!!!!!!!!!!!!!!!!! :)
Like the black finish looks so much better. Sounds incredible
I don't think you understand how happy I would be if a friendly cat just showed up at my house and came on in and kept coming back like that
Kev, that is one beautiful RC Monster truck! 😮
Hard to beat the sound of a nice 2 stroke, awesome build🤟🏼
Epic video kev. For the running problem on a normal car I would always check simple things first, look for air leaks between the carb and the cylinder head and start with the factory settings again.
Hey Rob, give us some fist-pumping action!! 👊
Hay Kev, you need to find a way to supercharge or turbo these engines, even the small scale turbo / supercharger would be a awsome project that could filter into other rc projects 😅.
Next time you spray paint something like that you should try steel-it. It’s actually very durable and I think it would work well for what you’re doing. I agree that the chassis should of come matching
Awesome Kevin cant wait to see more of this one!!
Love the cat !
Forget the truck, that cat had all the personality
the places you have access to to drive your rc cars is crazy
Obviously a nice chill guy letting ginge climb on your Lambo.
BOOM
"Looks professional ".... after spraying it like an 8 yr old. 😂😂
Exactly
Grats on the new cat!
Those cats are plotting something.. run while you can Kev
They probaly going to gang up on him and take over.. 😁😋
Bit of clear lacquer over the top will prevent the paint scratching as easy kev👍 great video as always dude 🤟
Kev’s new videos always make me want to go bashing
lets go bashing next weekend or something, what's holding us back? apart from the rain.
THAT'S MASSIVE! MORE POWER!!
it's about time this got some more BHP👍👍
AGF makes Raz Shiffren's perfect pass servo
What a sweet hobby...lucky man !
Kevs turned in to the crazy cat lady 😂😂
Aww cute cat mine ran away
Sounds like tank is air suction locking .. fuel starvation .. add a snappy breather or drill a small hole in the filler cap
Yeah, I would suggest also checking all the fuel lines pick up etc.
That just looks fun all around
My boss just acquired some widows late husbands rc aircraft collection.
It's insane we have enough planes to fill the basement completely at work.
About 15 1.5 m wingspan planes.
Various engines.
There's many Petro powered but also several brushless.
Boxes of servos the whole lifetime of his hobby.
It's an amazing find.
All free just wanted it to go somewhere besides just the family grabbing up his stuff to make a quick sale.
We plan on getting what we can flying or at least in the hands of some one that will enjoy it.
Kevin, you should have fed that cat. He looks very hungry and like a very good boy.
It’s not my cat to feed. He must have a home, he’s too cared for not to
Every cat that my family has ever owned just showed up like this. They were super friendly and good with kids. They all walked in their house over the years and processed to stay for the next 12+ 😂. I sware cats know where the good homes are 🤷♂️
@@KevinTalbotTVif that's your new place it may have been abandoned by the previous resident. You have the cat door and now the cat...
@@bockjess I asked them they said they had a small dog, the cat used to come in the garden but not come in the house. He must have an owner, hes well groomed and turns up smelling of perfume. And just as I'm typing this, he turned up!! 🤣
@@KevinTalbotTV he is yours now. You have been claimed.
Good luck to everyone.
And not just what paint you use but how you paint makes a big difference in durability and thick coats down first thing is not going to help with the durability or the curing process laying down a thin coat letting it dry and then doing multiple coats over the top of it is the way to go and if you really want it to stay on their good find an oven that you can put the painted Parts in and turn it to about 350 or 400 and let it sit for 25 to 35 minutes and then take it out and let it cool down I'm leaving the axle together and painting it is going to look good until the first time you have to take it apart and then it is going to look horrendous you might get away with running a razor blade around every scene before you pull it apart but there's a pretty good chance of it chipping off
Freaking awesome truck man.
Bro casually had like 10 Raminators
Keep up the great RC work Kevin. You give us small RC youtubers something to strive for! 🤙
Congratulations, you're now owned by that ginger cat.
Love that red in black, keep it up man, people don’t like the wait on videos but it’s worth for the quality your putting out now
Kev you need to use an etching primer on aluminum to get the paint to stick good. Without it it'll just scratch off easy. But, it does look better black👍
apparently if its anodised you dont have to, but its scratching off anyway so probably will end up anodising it all
@@KevinTalbotTV oh yeah, for sure if it's anodized you don't have to prime anything. I was just giving you some advice on future painting on aluminum. But I understand the hurry to just make it black and go out and rip! Love the truck man! Sick! That small muffler after the expansion pipe makes a lot of difference on video. Is it a lot quieter in person as well?
He is saying, use etching primer before you spray! It will give the spray can something to bind with.
Kevs cat sanctuary 😂😂😂🐈🐈⬛
oh god!!!
@KevinTalbotTV keep up the amazing work you will always be the my favorite rc UA-camr🛻☄️
Love watching these giant truck videos!
That's so weird how you guys drive on the wrong side of the road (cheers from America)
Do I hear some faint comment from one of the colonies? 🤣
Who says that you are driving on the correct side of the road? Typical American...
@@_Jester_when the Brit doesn’t get the joke 😳
Kevin that truck looks great . The paint should hold up fine , atleast where you scuffed it up . The adhesive promotor works amazing before you paint it
The detail during the build was awesome Kevin.
Project world’s fastest primal raminator?
Yes Mate is doing that!
@@KevinTalbotTV yes indeed very keen for his next videos on that build
How to make a fast Raminator?…………buy it a plane ticket😂
You rock Kevin! Lean or rich your build is still super cool!!!
Cat claws on the Lamborghini's paint work. Anxiety overload 🤢
Eh, cats don't use their claws all the time!
@@polarlicht4758you're that person 🙄👍
@@johnnysrcchannel7472Huh? I am a person, yes
@@johnnysrcchannel7472They're a person that knows cats have retractable claws?
@@Scarlet_Soul oh another, welcome
Aww, happy little neighborhood kitty guest star? I'm here for it. Such a sweetie too. More cat content. Should make a little clip of Ginge chasing around some tiny RC cars or something. Seems to have a curious and outgoing personality. Some snugs and snacks should convince Ginge to participate.
For how expensive this platform is the chassis and suspension seems to not be up to the task of doing much of anything. I’d be pretty freaking pissed off if I built one of these and it broke every single time I took it out. Blokes didn’t even get the shock tuning right, what a joke
BOOM!!
Find someone who uses chainsaws/strimmer etc - same type of carb. A good tune makes all the difference.
That's a huge RC truck. God bless
Congratulations on the new place and new Cat!
Dude you are crazy 😂 love this stuff ❤️
Ти робиш дуже круті іграшки ! Красива!
DUDE!!!!!!!!!!! that's not an RC truck!! is more like a mini Go-Kart with a radio controller.. Love it!!!
Hi Kev mate, for future reference, when spray painting plain aluminium bits and pieces, use an etch primer first, then your top coat.
Cheap and durable.
Your top coat will not just scratch, peel or flake off
Alex kowaliuk here, I like the Taylor gas one but I think I'd like to see a super massive brushless set up or maybe even a super massive brushed raminator that might be amazing.
You know what... Call Mike Taylor ! You bought a ton of engines of him... He can help u tune it 😀
Looks like the cat distribution system is working well on the Isle of Man.
I can only imagine how much goes into a video like this. I wish I had 10% of your talent. Great job!!
Cute cat
I LOVE it!!!! looks just like his dad!!!! you'll get her running right!!
It would be cool to see you customized a different Monster Jam body style for the Ramminator such as Snakebite or the Avenger body style
Love the videos keep up the good work plus I watch you from Georgia usa
Can’t wait to see the final result with the pb solved ! Ask the cat may be !!
This kind man help poor people to make dream's come true for poor people and He has fun
That thing looks like it has more power than most electric ones. I love that combo with the silencer. Have a guy come tune it perfect, n it'll be great.
Oh, its Christmas every day
Mick Jagger was the first one who wanted to paint it black decades ago. 😂😂😂
I know you won't read this, but, may I suggest watching a couple of videos on how to tune chainsaws. Sounds silly I know, but I think they'll help you understand the tune better. Chickanic has some decent videos as well as Steve's Small Engine Saloon. Good luck.
According to the lack of smoke now its a new engine… it could use some more juice!
Amazing video
Kev you seem like your taking all these comments a bit lighter and i love that so much dont let all these people stress you out! Stay Humble but looks what you have created!! a whole community!!! its such an amazing thing to see!! God Bless Us All LOve ya KEV!!
You have to run it a little on the rich side until you get it broke in, otherwise you will damage the bearings , a few heat and cool cycles will help make it run good, low jet until it makes a good idle and high jet makes the top rpm 😎
That noise is awesome
Ok this is _clearly_ a cat video meow!
You should make an RC car for the kitty to ride in, Kev!
Primal ramminator kitty edition 😃
Put a 100cc in to it 👍 with hardened gears and 2 speed gearbox