The DIY linked from my article has a pretty good walk through. The article I created was meant to by sort of an overlay - the little things that the DIY missed that I found helpful when tackling the second window shade. Good luck!
That's amazing. I checked the Rennlist "ultimate coding" thread on the 958s to see if anyone had done it yet, but couldn't find a great answer. As these cars age, I would much prefer the window shades couldn't be activated.
@@revolvinggarage380 I was preparing to repair it but my SA mentioned they had the ability to do so. The programming is for the pair, you cannot disable individually which didn’t matter to me.
The DIY referenced in the article covers this. Simply, if the shade needs calibration, hold the switch up. Once the shade is at the target height click the window switch down to stop it.
I still cannot figure out what the piece you are referring to that you removed with the needle noise pliers to release the metal rod. Please help. Thank you
Thank you for this video and link for more details. It was incredibly helpful to me and getting my rear door back in action. Thanks Again!!!
Thanks Matt! Congrats on completing the project, it is a true PITA.
Almost missed there was a write up in the description. Wish the video provided a walk though.
The DIY linked from my article has a pretty good walk through. The article I created was meant to by sort of an overlay - the little things that the DIY missed that I found helpful when tackling the second window shade.
Good luck!
Well, I have no idea what you just did. Explaining would be helpful I think...
Did you read the linked article? What are you having trouble with on the project?
I got the dealer to disable the sunshades via programming.
That's amazing. I checked the Rennlist "ultimate coding" thread on the 958s to see if anyone had done it yet, but couldn't find a great answer. As these cars age, I would much prefer the window shades couldn't be activated.
@@revolvinggarage380 I was preparing to repair it but my SA mentioned they had the ability to do so. The programming is for the pair, you cannot disable individually which didn’t matter to me.
@@EatLotsOfCurry That makes total sense as most Cayennes didn’t have this feature. Well done!
How do you calibrate the shade after you replace the gear?
The DIY referenced in the article covers this. Simply, if the shade needs calibration, hold the switch up. Once the shade is at the target height click the window switch down to stop it.
Do you just have to remove one panel or both how long it take you
I still cannot figure out what the piece you are referring to that you removed with the needle noise pliers to release the metal rod. Please help. Thank you
There is a small plastic tube that acts as a guide for the rod that lowers and raises the screen.
Can you send me the link please
Lame