How To PROPERLY Plasti Dip Car Emblems / C300
Вставка
- Опубліковано 13 жов 2017
- Link To Plasti-Dip On Amazon:
amzn.to/3sgGrWa
Link To Plasti-Dip Glossifier On Amazon:
amzn.to/3lHPn4m
My Mercedes C300 LED Lights (Night Review):
• Mercedes C300 LED Ligh...
How To Black Out Emblems, Badges, Logo On Your Car Using Plasti Dip | Step by Step Tutorial Guide
If You Have Any Questions, Please Ask. Don't Forget To Subscribe!
#plastidip #blackoutemblems
black out emblems
black out emblems with plasti dip
how to blackout emblems
blackout car emblems
Nobody in the group has a garage at their home? Kinda funny to see auto mods being done in a public garage structure.
Fake ballas, lol.
The N.Y plate says it all
2nd Amend
same here
Probably their apartment garage...
FAKE BALLIN
Homeboy sounds cholo, but looks like he's straight from Ireland
lmao I always laugh when i see this comment
completely! it's hilarious.
Ron Tafoya lmao
hey homes, let me get a potato ese.👍
@@senorpepper3405 Haha!!!!
Fire finish to the emblems Man... sick.
Ima have to try this out!
I’ve had my run around with plasti dip and I’ve got it lay nicely on my emblems but some tips that I learned over the past couple years is you should definitely remove all in the inner plasti dip, e.g. Mercedes logo, spray in straight uninterrupted passes especially for glossifier because it’ll cause the orange peel effect which is happening on your car, don’t go too heavy in one layer because it might cause drip formations in that layer and lay 3-4 layers of gloss on top of 6 layers of black to ensure the thickness is there. The thicker the dip, the easier it is to remove in the future.
Yea the thicker the easier 4 sure
@@ThinkMoneyBenny Does plasti dip last long?
@@nemanjarasula1599 yes very long
Great Video...I like how u fast forward some parts to ensure the video is not boring
Nice car man! Doing in my 17 Mustang this weekend. Thanks!
LETS GO! Great Job Bro.. Ima try this
Best one I’ve seen so far, will be copying!
Homeboy with the Infiniti plastidipping his entire car 😭🤣
Home boy really used a paper towel to wipe down his car 🤦🏽♂️
I only came here to make this comment.... Who uses a paper towel on their car? Great way to scratch up that paint for a cheap ass update.
and Windex
Paper towels and Windex. Totally the way Mercedes Benz recommends.
Just make sure you don’t do it to your cars... If you own one👌🏼
@@mscottsimon lmaoooo 😂
Awesome going to try this..thank you!!!
You’re welcome! 😊
I found this useful, thanks bro
Josh Espinosa no doubt! Thanks for the comment
Nice video. Very straightforward.
Mike Lettieri thanks!
Good video. I was thinking about replacing all the emblems but this is a way better option. Thanks
N Yo thank you
Great tip, thanks!
Looks fantastic! I have never seen anyone black out the Mercedes logo like that... I like it a lot. Maybe I will have to find a way to do something similar with my 392 Scat.
Thank you! Its very simple to do if you just follow the steps!
I thought the same. I’m gonna do the same to mine today 😀
Dude, nice video. It helped me out a lot. I just tried this out on my Lancer and made a video too! Thanks again!
How does it handle under a pressure washer. Or how do you wash your car with the plastidip applied??
@@bmtkid00 I still take mine to the car wash and use the pressure washer and foam brush. It hasn't done any damage after 8 months so far.
Looks great... I'm planning on doing my black Land Cruiser's chrome badges in matte black like your C300
Nice
A dust mask does literally nothing other than keeping the dust away from your lungs. Not fumes.
Same thing I was thinking haha
Lmao now the whole world is wearing one.
Funny ain’t it lol
N in N95 stands for nuisance. Nothing more. P is particulate. You’ll need the half face or charcoal if you want any of them fumes removed. Thanks for the video though bud.
looks nice that color!
Did my Lincoln MKZ, came out great
4 year old video and it still holds up 👍think I’m goin to do 7 coats on my emblems
that’s a fact!
very cool looking! looks great!
Thanks!
Awesome video 💯👍🏻💪🏻🔥
It made the car look more nice! Nice job
good vid, just bought Audi number 2, boutta try this on the emblems
I'll be doing this to my RDX A-spec emblems...I went to Acura and the original gloss black emblems are like $300+ INSANE!!!
Video was too long. Halfway through it, I got hungry so I left it playing and went to the kitchen to fix my self a sandwich. But then I found out that I'm out of mayonnaise so I went to a store. There, I saw the most beautiful woman I have ever seen in my whole life. But I'm really a shy person so I took up a three-year personality development course so I can introduce my self. She was very friendly and all, but unfortunately, she has a boyfriend. So I said, all good, I'm a mature person. I want the best for her and I harbor no illusion that I am the best person for her and she seems happy with her boyfriend, so I did not bother her anymore. But we kept in touch and we became friends and I got over my crush on her. Then she broke up with her boyfriend, we drank some alcohol because of it, I told her she'll be fine and I wished her well. I still think she's the most beautiful woman in the world, but like I said, I am over my crush on her. It was like five years already when I first saw her. Besides, I am quiet happy with the friendship I developed with her. It was more important than a crush. So we kept hanging out, drinking, having coffee, and all. I had a girlfriend, she started dating other guys. My girlfriend wants to live some other life without me in it, so I said, okay, I want the best for you and I want you to pursue your happiness. My lady friend and I drank alcohol about it, and she gave me the same advice I gave her when she was in that position and I became okay with the breakup immediately. But we were really drunk, so she spent the night in my apartment. I only have one bed, so you know what that means: She took the bed and I slept on the couch. But on the couch, I really can't sleep. Something was bothering me. So I tossed and turned for about three hours, then I finally can't take it anymore, I stood up and went straight to my room where she's sleeping. I approached the bed, gently sat on it and I reached for her shoulder to pull her closer to me. She stirred and woke up. She asked what's up. I told her, you know, the first time I saw you, I was watching a video and left it playing to get my self a sandwich then went to the store to get some mayo then I got distracted by life that I forgot to finish the video. She said, you know what, I've been wondering about a weird noise in your night drawer. So we opened that drawer, and lo and behold, there's my phone and this video still has two minutes of play time on it.
Tuhatjalakane it wast that long
Amazing
7/10
It’s an 8 minute video lol
I feel the same about your dumbass comment
Remove the "4MATIC" and "C300" badges, then plastidip the Mercedes logo badge
Exactly
Theyre glued on. Easier to just spray n peel
@@jayphelps415 whoosh
Exactly what I did👌🏻
@@jayphelps415 dental floss
Thanks for the video, good job!
Thanks!
Well done really nice 👍
Perfect!😎
good call on the logo...looks good
thanks man👍
This is one of the best tutorials on how to black out emblems out there, some other videos they are sloppy
Ohhh Man!!! Good job!!!
Thanks man! I thought it came out really nice.
nice one !!!! thanks
Looks sick.. gonna do this to my C230 kompressor tomorrow. I think it'll look so dope with the silver paint on my car.
4 sure.. fun project too
what cleaning spray is recommended to clean up the emblems and surrounding areas properly before proceeding to actual plasti dipping the emblems?
Glass cleaning spray is good.
Good question 👍
Nice video. Looks great
Thanks!
Awesome video dude, you have presented the method nice and easy - it is very helpful. I have left the sub! Greetings from Poland and have a nice day ! Peace! ;)
Awesome man! Thanks!
Very interesting !!!
Looks Dope!
Thanks! 💪🏻
Great job
Subbed just to be one of the first 10 subs when this guy has like 100k
Simonas Bajoras lol thanks man! I appreciate that.
BenzVlog seriuosly if u keep doing this i dont see how thats not happening (now i got ur reply too lol)
I was actually thinking to do my grill and some other bits
I see the finish came out textured, to avoid it being textured and getting a smooth finish just go over it with wet coats, so do the first coat light and then apply your next 3 - 5 coats wet and overlapping, not to the point that they drip but to the point where the plastidip looks smooth while wet, you applied all of your coats light and that's why it is textured, other than that, good tutorial, and sweet ride as well man!
How do you apply a wet coat?
@@trainscronce6269 you gotta go slower. Watch @DipYourCar's videos for all the proper techniques.
@@trainscronce6269 Um, you don't wait for it to dry before spraying again. OP was pretty clear...
ua-cam.com/video/4rYKoOR-Z6k/v-deo.html Did a video on how to do it properly, check it out !
Check Out Plasti-dip On Amazon Link Below:
amzn.to/3sgGrWa
how long do i leave it after the last coat before i take it off ??
@@thomasstephenson1450 you can take it off when you see it's dried up, around 20 mins.
How well does it hold up in the elements? I'd like to do the same to my emblems/badges but don't want to be reapplying it every few months.
Adam Bolick it holds up great, u won’t have to keep reapplying.
@@ThinkMoneyBenny Thanks for the info!
This is so helpful. Love it!
Masiel Diplan hi sexi
Their cars are better than your car if you even have one
great video
Thank you!
I just did all of the plasti dipping but its very difficult for me to take out the inner plastidip of the letter!! If someone can help me!!
Looks good how strong is the dip ? So if I take it to a car wash would it peel off ?if the scrubbers hit it
fernando b nvr head any issue at car washes
Nice job ben, think leaving the emblem black does give it an elegant finish. Btw, that guy vaping at the end with the genius idea and Infiniti is a pretty cool guy..because it’s me!! 🙃🤣
If I black out and want to get back the chrome logo after say an year, plastidip can be peeled off? I have a leased car so wanted to know before I black the logos out. Plz do answer.
Kush Pathak yes thats exactly why i used plasti dip .. because you can remove it at any time you want.
Ok I have a question I have a ‘07 civic coupe and the Honda emblem on the back is partially under the spoiler, I have bought the plastidip and tape but couldn’t figure out how to tape it off. Any tips?
Jeff P plasti-dip spray the entire area where the emblem is, and just peel off the parts you don’t want after it dries, use a toothpick if needed
I wouldda got that chrome bar below it all but it kinda looks dope contrasting
thanks!
I feel these dudes.. I want to do the same but I don't have a garage or anything 😂.
Lol the struggle bro
you can do this outdoors
Nice man, how long do you leave it between final coat and peeling it off?
a good 15-20 mins… you’ll know when it’s dry & ready…
Looks great; I was wondering how cars have their emblems black
You can buy black emblems anyway
Emblem pro’s you’ll spend less on new emblems than you would on plasti dip cleaning/tape materials and you get a professional look, you wil need paint also if using plasti dip
How long does this stuff last on the emblems? Does it come off easy?
A long time, and no. U have to purposely peel it off
Hi, can you let me know where you got your spoiler please? Thank you!
It came with car. Back in 2017 the car model was called the c300 amg line
you make everything look easy!!
What’s the reason I should do this exactly?
Does that stuff cure or dry harder? If not and you can pull it up with a tooth pick then after one or two car washings it seems like it would come off. I wash my car with a Honda Pressure Washer...
Plasti dip doesn't harden at all. It just dries. It doesn't work the same way as normal paint. That's why you have to be really careful when you are wahing your car, because yes it can very easily come off if you are not careful, like standing too close to the car while washing. I tried plastidip once on a car, never again. It's kind of useless in long term. But works nice for small stuff like this 👍
How does it peel off the car, but not the emblem itself? I want to do this with my Buick logo, but it's very intricate with lots of small spaces.
Emma Canseco Because if the clear coat gloss that is the car. It doesn’t allowed w the plastidip to stick
Dip, layers on each surface you put it on. Your emblems and your car are just 2 separate surfaces, one on top of the other. So since your spraying both, when you pull the dip off from your car, the edges of the emblems effectively cut dip around the outline
The colour of your car is beautiful.
Thanks!
How does this hold up when you wash the car?, How light do you have to go when scrubbing these areas?
Sam Hengami it holds up great, i get hand car washes done and i dont notice anything done different
Cool
Thanks
I still dint get hoy when you finish and remove the borders it cuts exactly on the emblems. Mine keep sticking and if I remove the borders it will tear part of the emblem
not sure either, if u watch other youtube videos u will see how it works
U made it look so easy bro. Maybe I’m jus doing it wrong
Keep trying, the nice part is u can always remove & redo it
@@ThinkMoneyBenny that’s tru. Appreciate it
Life pro tip: would not put the aerosol can in the engine compartment. I would put it on your dashboard and run the defrost on heat for a while to heat up the can... This tip works well in the cold days not sure if I would do it on any hot days for sure!
sounds good!
Glad you left the Benz star as you did. Looks nice like that
Can we use the heat gun to dry in between coats ?? Please let me know asap or someone. Thanks !!🙃
no need to use a heat gun! Just let it air dry on it’s own.. 15-20 mins!
@@ThinkMoneyBenny thank you..
Does the manufacture recommend bringing the plasti dip to a higher temperature before using it?
i've read online that it works better if its warmer
You don’t need to put it in warm water that literally doesn’t do shit. Unless you’re in a colder area but for the most part just shake the can for about 1min that’s what I did and my Toyota emblem came out lookin clean
What about protecting the paint from the spray cans resting on your car
I like how you left the Benz logo black inside looks bad ass
For sure 👍🏻💯
Awesome
thanks!
I was surprised to see how hard you scraped with the toothpick to get the centers of the 0s to come out.
patience is required !
Nice
Dopeee
Is that just a paint tape or is a certain kind don’t wanna mess up the paint job
Just regular paint tape, nothing special
Is it supposed to be bumpy like that?
that car is super duper magically awesome !
That's a flawless job, looks awesome, how much are the plasti dip cans?
$5 at Walmart!
What’s the best way to peel it... it keeps taking my emblems with ut
FLXHOOPS either you’re not spraying on enough coats or you’re not waiting long enough before peeling
FLXHOOPS use a toothpick before its fully dry and pick at the outline of the emblem
You guys at Cross County?
7:34 I'm happy you choose to leave it as is. It looks better
no it looks ridiculous
What about the front star?
What is the black stretchy stuff you used around the logos?
PLASTI - DIP
Think Money ohhh that’s so sick I didn’t realize it just peeled off. Thanks!
I'm liking the accent!
Thanks lol
Makes your car look sexier 😍😍.
Dont tell me you plasti dipped the tailights and call that “smoked out”
😂😂😂
can this be done for steering wheel emblem?
just make sure everything is covered and protected from overspray inside the car
@@ThinkMoneyBenny thanks!
The title says “PROPERLY” 😂😂
why wouldn’t you do the chrome strip below the emblems?
Nice mod
Hey bro great video great advice. I just bought the plasti dip Matt Black. Would i need the Plasti Dip Glosifier???
Cheers my man
You don’t need it, but it adds a glossy finish. Thanks for watching! And don’t forget to subscribe! 👍🏻
How does it not peel of from the emblem/letters but just around it?
because it gets wrapped into the crevices along the emblems
How long did u wait before pealing plastic off?
15 mins or so, whenever it looks all dry
That's actually a fantastic place to plastidip.....NO RAIN ...NOT MUCH WIND...AND FOR FEW £$...
IT BEATS DOIN IT IN STREET WITH UNRELIABLE WEATHER
So why doesn’t it peel off the emblems? I figured you would if had to go around them with a blade but nah.. I don’t get it.
because there's space gap between the emblems and the car.
@@ThinkMoneyBenny thank you. I’ll give it a try on a first gen Sequoia with gold badges.