Corsair 5000D AirFlow pros and cons - an awesome case with loads of potential
Вставка
- Опубліковано 25 лип 2024
- This is a short video on the Corsair 5000D AirFlow showing the highlights and lowlights of an awesome case.
Other related videos:
Corsair 4000D Airflow Unboxing, setup and installation • Corsair 4000D Airflow ...
Corsair iCue H150i Elite Capellix AIO Unboxing and installation • Corsair iCue H150i Eli...
Corsair QL120 VS LL120 • Corsair QL120 VS LL120...
Corsair QL120 RGB Fan Unboxing and installation • How to install the Cor...
Corsair RM850x Power Supply unboxing • Corsair RM850x Power S...
Corsair 680x Crystal with QL120 fans (swapped from LL120s) • Corsair 680x Crystal w...
See deals on the Corsair 5000D Airflow (note these are affiliate links that earn me a commission at no extra cost to you, other retailers are available):
Amazon US - amzn.to/3sHHv5Y
Amazon UK - amzn.to/3iz7wzS
Corsair - go.corsair.com/5gMKa1
Amazon IT - amzn.to/3c3OXmg
Amazon DE - amzn.to/367mkki
Amazon FR - amzn.to/3o8YScn
If you're interested, the spec of this build is as follows:
Motherboard - MSI Meg Z490 Godlike
CPU - Intel Core i9-10900K
RAM - Corsair Dominator DDR4 64GB RGB 3466Mhz • Corsair Dominator Plat...
M.2 NVMe drives - Samsung 970 Evo • How to install NVMe M....
M.2 NVMe drives - WD_Black SN750 • WD Black NVMe Unboxing...
SSD - Samsung Evo 860 Pro SSD 1TB
PSU - Corsair RM850x 850 watt • Corsair RM850x white P...
GPU - MSI RTX 3080 Suprim
Benchmarks from this test can be see here:
PC Mark - www.3dmark.com/pcm10/56995805?
Time Spy Extreme Stress Test - www.3dmark.com/3dm/56997984?
Time Spy Extreme benchmark - www.3dmark.com/3dm/56998661
Fire Strike Ultra - www.3dmark.com/3dm/57000011
Fire Strike Extreme - www.3dmark.com/3dm/57000881
Port Royal www.3dmark.com/3dm/57003673
See the official page for the Corsair 5000D Airflow:
www.corsair.com/uk/en/Categor...
Specs for the 5000D Airflow:
Case Dimensions 520mm x 245mm x 520mm
Maximum GPU Length 420mm
Maximum PSU Length 225mm
Maximum CPU Cooler Height 170mm
Case Expansion Slots 7+2 vertical
Case Drive Bays ”(x2) 3.5in (x4) 2.5in”
Case Form Factor Mid-Tower
Case Windowed Tempered Glass
Case Warranty Two years
iCUE enabled No
Color White
Case Material Steel, Tempered Glass, Plastic
Radiator Compatibility 120mm, 140mm, 240mm, 280mm, 360mm
Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110i, H115i, H150i
Case Power Supply ATX (not included)
Weight 13.84kg / 30.51lbs
Case Drive Bays 3.5" 2
Case Drive Bays 2.5" 4
Note, as standard you only get two fans - AirGuide fans that cannot be purchased separately, BUT you can use the PWM controller to control upto 6 six fans. And if you connect that to a Commander Pro, you can control even more!
As you'll see, you can install 10 x 120mm fans (or 13 if you do push/pull) or 4 x 140mm fans. You also have the option to install as many as two 360mm radiators. But you can't install on the front and side at the same time.
See the H150i Elite Capellix:
www.corsair.com/uk/en/Categor...
Fans used in the case:
Corsair ML120 RGB Pro
Fans used on the AIO:
Corsair ML120 (these cannot be purchased seperately)
Big thanks to my super awesome UA-cam members:
Meatykeyboard!
Rawrr483!
PLEASE NOTE
Affiliate links:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Big thanks to my super awesome UA-cam members:
Meatykeyboard!
Rawrr483!
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
0:00 Hellooo
0:07 Corsair 5000D over view
1:18 What the case comes with
1:25 Taking the Corsair 5000D apart
2:09 Removable dust filters
2:37 Top fans configurations
3:18 The bottom case fans?
3:55 Front panel fans
4:15 Removable front trays
5:15 cable management
5:50 SSD Trays
6:26 SSD Tray installation problem
6:57 Pre installed PWM Controller
7:45 Rear bracket markings for Drives
8:05 Hard disk drive tray
8:50 Side mounting fan trays
10:36 Cable management problems
11:55 PSU installation
12:57 Cable management problem
14:19 90 Degree USB adaptor
15:01 rear door removal
15:35 Space for radiators
16:00 Vertical GPU mounting option
PLEASE NOTE
Affiliate links:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases. - Ігри
Related videos:
How to wire and connect Corsair RGB fans ua-cam.com/video/jvXCbny-Suw/v-deo.html
Avoid these problems with your all in one CPU cooler ua-cam.com/video/nVkN8diBIAE/v-deo.html
Common Mistakes You Might be Making with Your PC Fan Setup! ua-cam.com/video/uPIMv30Vs3w/v-deo.html
See deals on the Corsair 5000D Airflow (note these are affiliate links that earn me a commission at no extra cost to you, other retailers are available):
Amazon US - amzn.to/3sHHv5Y
Amazon UK - amzn.to/3iz7wzS
Corsair - go.corsair.com/5gMKa1
Amazon IT - amzn.to/3c3OXmg
Amazon DE - amzn.to/367mkki
Amazon FR - amzn.to/3o8YScn
I'm glad someone finally acknowledged that the radiator fan situation at the top with the CPU power and how tight it is. I ended up doing the fans on the bottom and radiator above where you put your secondary fans
Bought this case after seeing this review (and others) and I have to say it's easily the best case I've ever had for a custom-built PC in all my 20+ years of PC building!
It's so easy to do a nice clean build with this, and without much effort either. Now running an i7 build with ten Corsair LL120 fans and an NZXT Z73 360mm AIO and am very happy!
Very nice! It was easy to build in for sure.
Have been watching your build videos since last year and had so much inspirations and ideas for my build. Mines almost identical to yours and im very much happy with it.. Thank you...
Thanks for the kind words! Glad to be useful.
This review answered all my questions I had about this case 😂 THANK YOU!!
Glad to help. Hope you appreciated enough to subscribe 🦐
@@TheProvokedPrawn I did!!
@@cloobro superb. Thanks!
One thick 360 rad is all I need and this should look nice facing the window panel. Gonna make it bring fresh air from outside the case in a push/pull configuration 👌
My 5000D Airflow arrived yesterday and the build went fine.
It was a little fiddly removing the cable shroud but all went well in the end.
Using 140mm fans for the front and the top I felt that they should have extended the slots for the fitting of the larger fan on the front of the case. IIRC the 4000D seems better in that way.
Agree with the actual usefulness with the HDD cage, for the 3.5" drives. It has to come out and in my opinion can't really be used effectively due to needing that space, at least I do, for the cable management of the PSU.
After fitting the 140mm fans to the top I also had issues with the two 8 pin plugs for the motherboard, out a fan came...!
If you do mount fans on the side, no dust removable dust filter is there - unlike the front and top.
The inner rear door does indeed come off easily, I wish that it had a better latch, not really important, but when you have bunged all your cables in for your build it doesn't close shut as easy.
I wish that they had made it possible to remove the bottom dust filter for the P~SU intake from the front, like on my previous Fractal R5 case, rather than the rear.
Overall a good case.
Great videos on this case, I just bought the 5000x rgb and they've been very helpful
Glad to help. Hope you enjoyed enough to sub
For the front intake fans, i just unscrewed the side intake fans for a little gap and ran the front intake fan cables through each side intake fan. Looks really good and the side door closes with no issues
where did you put your aio?
Sweet, just got the 5000D black standard, cant wait to build in it !
Had ordered a 4000x for my new build back in december. Been waiting on the cpu since November :/ and been searching around and just came across this case, decided to return it and purchase this one! As well as the white capellix over the h100i platinum. Thank you for the reviews from both!
Glad to be useful. Good decision to be fair.
Love this Howard Stern Tech channel!
*thanx for this great review - this will be my next build case btw
IDK about a year ago but Corsair makes all of these fans in white now :) I just got the QL delivered yesterday.
I just bought a hyte y60 and ended up returning it for one of these. It's a really nice case with plenty of room for very large gpus in the future and exceptional airflow. Plus looks great with the rgb
This is awesome. I actually bought this case but I haven't built in it or opened it yet as all my parts are still on order. Thank you for mentioning that you can mount the HDD on the rear bracket! I was worried that I would have to do something real weird with the PSU and HDD trays as there is barely any room for that little tray there.
Glad to help. Hope you enjoyed enough to subscribe and enjoy the case too!
One word for the case as well as ur narration ..."EPIC "...... Thanks !!
Thanks. Hope you enjoyed enough to subscribe 🦐
@@TheProvokedPrawn U r welcome... I did.
just ordered this case great video best review iv seen !
Awesome, thank you!
have you already built in it? How was it?
How’s your build going?
@@jasonhunt2909 i built a whole ek water cooling loop with 5900x and 3080 fe getting amazing temps better then my friend with a lian li im able run 2 360 rads both as exhuast and 13 fans total
@@edynut That’s awesome! I can’t find a GPU. I’m afraid to purchase everything else & be left without a gpu 🤦♂️
I was looking at Nexus Gaming video for best cases in 2021, and I really liked this one during his vid. I then jumped to your vid for fan configuration, and you sold me on it! I just ordered this in the black version, I realized my NZXT h510 case is total crap for cooling. Now I just need to order a 3 fan AIO and I should be good to go! I'll definitely be coming back to this video when I am ready to make the build!
Glad to help
@@TheProvokedPrawn I followed your vid, and installation was a breeze. Especially when mounting the 360mm rad, I made sure all cables to the mother board were already set so i would have to remove the rad. Loving the case!
Thanks about every 12 years or so I build a new PC and this video helped me choose a case and size CPU cooler for a LGA 1700 i9-13900KS. Ill be running this case and the 360mm radiator. Thanks!
You're welcome
Thank you for your video! Its informative. Thanks for making it , I was wondering about the case and this answered all my questions!
Thanks for watching. Hope you enjoyed enough to subscribe 🦐
@@TheProvokedPrawn maybe im going to buy this case, I was just looking for some cases with decent space to make a 3x120 mm rad or at least a 3 fan radiator in top of the case and maybe some radiator upfront, loved the side radiator mount in this case as well. as my budget is enough for it. Thanks for making the video!
Hope you got some more recommendations fore these type of cases.(watercooled and easy to build in.)
I Loved the lian li dynamics as other option but its done so many times. i'm in the exploring phase of my new case. now I got a very small nzxt case it barely fits in my custom loop for the graphics card, but was thinking of upgrading.
@@jasper-3338 this was easy to build in, as was the 7000D. I'm also a big fan of the Lian Li Dynamic XL
One thing worth mentioning about the 5000D platform is that whether you have the 5000D, the airflow, or the 5000X variant, they all share essentially the same platform, and so you can mix & match various panel types.
For instance, I bought the vanilla 5000D (since that is what was on sale), but I wanted more airflow through the front. So, I purchased the airflow panel.
For the top, I didn't need as much airflow, so I purchased the glass top that comes with the 5000X.
Each panel was only $15 - Corsair's pricing on their replacement parts is exceptionally reasonable, and is one of many reasons I'm happy to give Corsair my money.
Great review, as always
Interesting logic. Thanks for sharing
holy crap im surprised it doesn't fly away. thx for the review, im definitely going to grab one.
This case is wild, i got the 13 fan setup and its incredibly cool for temps
Oh man can you tell me your temps?
@@zereimu Originally i had a corsair carbide 275R and my gpu was around 85-88 Overclocked
Cpu was also very hot overclocked. and this case brought everything down a lot. my gpu doesnt go above 70 now overclocked and the cpu is also much lower
where did you place your aio ?
@@cheersmike_ Top of the case with 6 fans on the rad
I got the black version of this. Ran into similar issues with cables blocking access. Not a 'fan' of the cable tidy plate when using a standard 24 pin power cable due to how bulky it is so had to loosen the plate a little even when using a cable mod. The side panel tempered glass is tinted on the black model too, which looks really nice. Overall, it's a really nice. case. :)
Yeah it's a great case, I seriously considered keeping it as my daily driver but went back to my Lian Li Dynamic XL simply for aesthetic reasons.
5000D it is, thank you sir!!
This is the best ASMR on the internet.
Given the 3 extra intake fans on the side, would you recommend putting a 360mm AIO in the front as intake (possibly in push/pull config)? Will the relatively short standard AIO tubing be able to reach the cpu from the bottom of the rad?
I had the same problem with my Aorus mobo and 360 aio as well. But there was no gap small enough to force the 8pin from above. I had to run the 8 pin from rear and side (basically corner where the rear exhaust and rad meet) and flip the rad tubes to the front.
This thing it's a beauty 🔥🔥🔥
as always great detail. very entertaining
Hello! If you're interested in the 5000D, you should check out my more recent video on the RGB version of it! ua-cam.com/video/w-_g7inHcX4/v-deo.html
I will thanks@@TheProvokedPrawn
Bought it after the review here. A bit nervous about my 2 HDDs and the PSU clearance issues that several channels/publications identified... we'll see!
How efficient would a top mounted fan pull setup be, with the radiator below? Rather than a push setup with the fans below the radiator?
I was pondering the idea of installing a H150i but using the 3 RGB fans it comes with in the front of the case and using the 2 non-RGB fans that come with the 5000D in the top recess pulling air through the radiator. I would obviously need to add a third non-RGB fan in the top recess.
With this much fresh air coming, how does the CPU temperature differ between a top and front/side mounted aio?
great breakdown
Thanks! Hope you enjoyed enough to subscribe
Just been let down on an order for a CM H500M, found this case was released and of course you've had two EPIC videos. Thanks for answering almost every question i've had about this case.
Was let down 12 hours ago after waiting 2 months for the CM. Corsair time it is!
Ordered the H150 too, even before your videos. You've just backed up my choice!
Nice. Glad to help! Hope you enjoyed enough to subscribe
Also managed to snag 7 QL120 fans ;)
Hi, Great videos you‘ve been putting out, thank you! I‘m just about to build in this case and was looking at the arctic liquid freezer ii, which has a 398 mm radiator. Could I fit that on the top like you did? Thank you!
Looking forward to the vertical mount video - doing that with two radiators
ua-cam.com/video/4b8lb8adXTA/v-deo.html
How to vertically mount in this case ua-cam.com/video/4b8lb8adXTA/v-deo.html
And what it's like with the two case fans ua-cam.com/video/r5OY9llXRwo/v-deo.html
Anyone know what the GPU temps for a 3080 are like with this case, say with about 8 fans total? If you happen to know what the temps are like in the winter and summer with or without AC in the latter that info would be much appreciated.
Is the glass panel tinted at all? Thank you for showing with the glass panel on, many other never show the glass panel at all.
Is performance better with fans on AIO below or above radiator?
On Linus Tech Tips' latest $10000 computer they have fans above radiator. They are also cooling a 64 core threadripper
......could you put 1 vent in the back? (switching the air cooler position so the wires would be positioned in the front part- not in the back part like you did)? Thanks Mate !
ive allways wondered, if you have 6 fans on top blowing air out of the case. isnt the dust filter technicly keeping potential dust inside? is there any need to keep it on if the air is blowing outwards?
Hiya! I've snagged myself an Aorus 3090 Xtreme with a front-facing LCD, with this case is it easy (relatively) to feed its required 3x 8 pin power cables top-down in such a way that it doesn't cover the LCD or is the only real option from below the GPU?
Thanks!
Quick question, I have a commander pro and from what I watched on your video do I plug the pwm repeater pwm fan connector to the commander pro vs the fan header on mb?
Dumb question but if I was running push pull config at the top like yours, but with the NZXT Kraken cooler which fans attached to the radiator would you plug into the Aio 3 fan splitter? The push or the pull fans?
Found this video extremely useful. I am still not convinced with the necessity of both the front fans and side fans installed at the same time - surely they would interfere with each other.
Thanks Gary ua-cam.com/video/r5OY9llXRwo/v-deo.html
Just got this case and 7 noctua fans, now the w8 begins for the delivery 😀
Hello can i fit my old 80 mm fans in it ?
I had the issue with the 8 pin CPU power connectors too, running up the back with a 360mm AIO and an intel build would not work, and I didn't like the stress I was putting on the cables or connectors to try to force it with it hidden in the back. I spent an hour or 3 trying to figure out how to do it. At one point I went from the bottom of the motherboard straight up and then my 4080 GPU wouldn't install. Ugh. So, my solution for now was I ran them along the top right grommet rubber holes from the back and to the 8pin CPU headers. It wasn't worth damaging the motherboard for a cosmetic issue. For reference I had the 1k corsair shift default power cables. Maybe I'll get something off cable mod someday. I find it acceptable as is. Just make sure if you do this that the cable doesn't hit the fan blades of the AIO.
I really want to use the x570 aorus xtreme in this case but am afraid it won’t fit or it will be tight instead should I just use a x570 crosshair viii dark hero instead your thoughts
If you put a 65mm thick radiator on the side, can you still fit fans on the front or does it block the placment?
i have this case and i am thinking is there enough room on top to mount arctic liquid freezer ii 360
Love the reviews and have a question.
You say you cant have a front & side mounted radiator together but would there be enough room to mount a front 360 & a top 360 and then put an EKWB QUantum FLT 360 Reservoir/pump unit in the side position(without the fans there) ?
i run 3 360 radiators on this case. One front, one side, and one top with the Corsair reservoir mounted in the space behind the front fans. They all pull air out from the case. One fan on the rear pushing fresh air in. Negative air flow which is the preferred design according to corsair. i9 13900k and a 3080ti, they generate some heat, I can use the PC as a space heater but it doesn't have a problem keeping the temps normal. The only downside I've seen is a 360 doesn't fill the entire mounting area and leaves some air gaps but you dont notice it once its installed and the extra gaps might even be good for me since its neg air flow.
@The Provoked Prawn can you do a push/pull in the front or side and still have all fans?
how noiesy is it with all 13 fans??
planning to buy it
Can we get a comparison video with this case (5000d) and 4000d? I wanna see how the case really is compare to its predecessor
It is on my to do list. You can watch the video i did on the 4000d in the meantime. It's a much better case imo. Easier to build in, more room for things, likely better airflow and minor improvements that make a difference too.
whats the best fan configuration for this case if youre completely air cooled?
In the front of the PC case can you fit two 140mm Noctua fans and one 120mm Noctua max fan in between the two 140mm Noctua fans thanks in advance? Plan on putting 3 Noctua max 120mm fans as exhaust on top and 1 Noctua max 120mm fan in the rear as exhaust as well do you think it will work? Thanks again.
Can I put a 140mm fan on top then 120 on the rads for a push pull
Damn I missed the eBay listing! Would you still recommend the airflow case for a dusty room? I hoover every other day but still seem to get quite a lot.
It has filters on every bit where dust could get in and they're good mesh ones so easy to clean and good for keeping filth out.
Is there not a dust filter for the side fans or are those exhaust fans?
Can you put the cover cable on the fans on the back?
I have this case, im in canada, it comes with the commander in it, except how do I use it in conjuction with Corsair iCue?
I have my AIO Fans + 1 Case fan going into my commander pro, and the repeater into a spot on my motherboard, but if I put 6 fans into the repeater and plugged that into the commander pro would they populate in iCue?
I want ONE software to control them all, and I dont like Armory Crate at all. Is there any way this is feasible ?
Please tell me or anyone who has tried this with this case, can you put a 360mm RAD with fans on the side intake and still have 3 fans on the front as an intake. I truly feel this would be the absolute best air flow possible. I saw an air flow test with smoke and these are the best findings. 360mm rad with 3 fans on the side pulling in air, 3 fans on the front pushing that slightly warmed air mixed with the new cool air toward the board, then 2 120mm top fans with one rear 120mm exhaust fan. They found 3 120mm tops fans actually sucks out a lot of the cold air before it reaches over the CPU area and they found cooler temps with only two top exhaust fans. So, will this allow a side mounted 360mm red with 3 fans and then adding 3 front 120mm fans without hitting each other?
Would all fans be 120mm do the work ? Or add 140mm
Great video! I have a question though, will 2 3.5 hdd drives fit in with a RM 850i PSU down there?
It's tight but might be plausible. Someone else said they managed it
@@TheProvokedPrawn is there a video about it?
My question is would there be enough space to mount a 360 push/pull rad in the front and still have room for two 3.5" HDDs and your PSU?
no
Why I remember Agent Smith from The Matrix when I hear your voice... Very cool
You're not in the Matrix though. Subscribe for more.
What was the case in the background when you were building?
Also how were noise levels with so many fans?
ua-cam.com/video/6Oexkk3Ls5M/v-deo.html
And it wasn't too bad tbh
Can you adapt any bottom fans ?
Thanks for the video. It seems a shame that a radiator cannot be mounted in the recessed top section, with just the fans then mounted on the inner roof.
You can, I installed an H150i exactly that way. I don't use the dust filter since I don't want to obstruct the exhaust at all but then the RGB fans are at the inner roof for pushing air through the radiator. Works really well and solves the space issue he has with the CPU power cable in this video. I love this case, it made building really easy since there are so many places to mount things and hide cables. Cheers!
Can’t decide this or the phantek P500A ... thoughts anyone would be appreciated thx
How do you think this compares to the o11 xl, as I know its more. I know that you have this case, and I just want to have an overview cause im in the market for one of these.
It's very comparable. I personally prefer the Dynamic XL and will be returning to it. I prefer the look of it and the rear side (much easier to install HDDs for example). But the 5000D is great.
Is it loud with that much fans?
your voice is so soothing lmaooo
Glad you feel that way. Sub to hear more of it.
Have some therapy ua-cam.com/video/l6XZ4XhwH00/v-deo.html
so just go with all m.2 ssd with aic ssd for bootable drive since all that cable management. where should i put the 360mm aio and rx 6900 xt asus rog strix lc 240mm radiator?
Put the gpu rad in the top exhausting out cause they generate more heat then cpus, i have the gigabyte 2080ti xtreme waterforce and it gets hotter then my 3900x on the corsair 360 rad. So you dont wanna be pumping all that heat into your case.
Thanks! I'm about to do a 5000D build with a Kraken X73 and a RTX 3090 Hybrid so (2) radiators. I was wondering how to do it. I'm thinking I need room temp air coming through both of the radiators into the case and then exhausted through the back and top?? So the radiators installed in the back and front?
I don't think you can do that from what I've read. It can only be top and front or top and back (assuming you mean side). Not both at the front/side.
@@TheProvokedPrawn ok thanks! : ) I saw another video on it and he said not to exhaust out the back when air is coming in from the front because the cooler air will not get to the motherboard as much. Might leave the back alone and do a simple pull from the front/top and push out the back.
hi I need some help, if I have intake on the front, then intake from the top with a radiator and do a push pull, and only 1 fan for exhaust on the rear, will that be sufficient enough circulation?
Yes, because as long as you have positive pressure air is being forced out.
can this case fit an EVGA Z690 Classified MB
Is it possible to have the side fans installed while keeping cable hiding tray, maybe 12-15mm thickness fans can fit?
I tried to do this exact thing with ll120s and they mounted fine with the shroud in place, but ended up removing it as it was extremely difficult to get my sleeved cables through it and connected to the motherboard. It was putting a lot of pressure on the connections at the motherboard (I.e. usbc and usb3 connectors).
@@imarickjames Glad to hear that regular 25mm fans can fit, maybe a 15mm fan can ease the pressure om those cables
why install the side fans if your just going to suffocate them? LOL
@@phrostbyte8260 Not sure what you mean, static pressure optimized slim fans work great as size fans.
@@phrostbyte8260 to make the side look rgb mad lmao
What model are those front fans?
Would you be able to put an m-ATX motherboard (like the B450m Pro4) in it? Thanks!
yeah, the case is made for that size and smaller ones too
@@Aiden-on2fk Awesome, thanks!
What if you used a 240mm rad instead of 360 could you use three rad total?
Put a 360 on top, 360 in the front and 240 on the back area. Thought?
Doubtful. I think the reason you can't fit three is because of the space back there.
Hey, all fans are MLs? Thanks :)
Nice!
Thanks.
still not sure between this one and Lian Li Lancool 2 Meshify
I'm not sure if I'll get a reply, but am I missing something with this tower? Now granted, im not educated on pc building but I have an old tower for my setup I'm currently using and it has a ton of usbs in the back of it to plug my monitors, my audio interface, my mouse and keyboard and ethernet into the back and I see absolutely nothing on the back of this tower for any of that. The only thing I see is the usbs on top of this tower. Any help please?
They're all on the motherboard?
This case isnt my first choice but forced to buy this because the lian li o11 d mini is out of stock atleast the one that makes sense to buy price wise. Im already payed too much on the gpu and cost piled up really fast. This case feel like im still stuck in the 90s because of the tower design compared to the lian li. But to be fair even though this is an impulse buy because of desperation watching more and more builds for this, i feel like i wont have regrets on this one. The o11 mini is just a freaking beautiful case. I would still buy the o11 mini case in the future when it restock and get cheaper more
Don't fancy the standard size Lian Li?
does it fit eatx board?
Did you do the vertical mount yet I just picked up this case
ua-cam.com/video/4b8lb8adXTA/v-deo.html
One thing that I still don't understand from watching any of the Corsair 5000D reviews, is whether or not the cable cover in front of the side fan housing can be left in place when the side and front fans are installed. While that might seem like a pointless idea, I figured the cable cover would direct airflow (or suction) from the side fans directly over the motherboard, while also mitigating airflow conflict/cancellation between the front and side fans.
Wondering this my self, nobody has mentioned this on the reviews Ive seen so I suspect it wont fit but im hoping a 12-15mm fan can fit.
@@Pandemonium088 From Richard at Corsair "Yes. The panel covering the side fan bracket would have to be removed."
@@michaeljemery Is that even with a 12mm slimfan?
@@Pandemonium088 He wasn't specific about size, but I would assume no fan would fit.
@@michaeljemery damn what what shame, I wanted to sneak in more fans :/
Can a 120mm fan fit on top of the PSU shroud, over the mesh?
nope
How much did it cost?
Could you tell me how many ssd trays they give you? Is it only 3? Thanks
Three 2.5" mounts plus two 5.25" bays that you could use too (total five places), but if you have a modern system with motherboard-mountable M.2 drives, use that first. There is loads of space on the plate behind the motherboard that you could stick another two 2.5" SSD's with double-sided tape if you were really committed!
My system doesn't use any of the SSD mounts or the 5.25" bays at all, but they are there if I need them. All my drives are M.2's mounted on the motherboard.
Why didn’t you run the tubes from the AIO from the front of the case vs the rear? Just wondering since I am buying this case and I’ll have three fans in front, three on side, one exhaust at rear, and 360mm AIO on top
No particular reason
@@TheProvokedPrawn @bradmacklin have you tried a front/side aio mount
Hey!
Can I install the AIO radiator on the top,under the dust filter?
🤔🤔 interesting question. Something I'd have to investigate. Are you thinking rad on top, fans inside?
Yeah!
Rad on the top
Then 3 fans inside
So if anyone has non white radiator that can be not displayed
you cant cause theres no hole for the tubes to run lol, also dont use filters on exhaust fans, youll just reduce airflow and increase noise.
Could you tell me if the hoses on that AIO would reach if the RAD was placed tubes downs front mounted please? My calculations say yes but I would like to double check
I'd imagine it would be very tight. I'll try to remember to check when I take it apart.
@@TheProvokedPrawn awesome thank you. I think it’ll barley clear. Otherwise I’ll have to top mount which means investing in 3 extra fans to populate the front which if I want to match the ML fans, that’s 110$ ish. Rather avoid that! Haha
Also I don’t know if having more exhaust would be good. Because if I had it top mounted, I’d have 3 fans on the radiator as exhaust, 3 intake fans, and one more exhaust on the back. So 4-3 I think that might create negative pressure.
So I just got my 5000 in the mail today, unfortunately rad didn’t fit in front. So that leaves me at, 3 ml120’s as intake on the front, the rad up top used as exhaust and a 7th fan for exhaust at the back. My concern was having more exhaust than intake. Should I just leave out the 7th fan(exhaust at the back) and leave it 3 intake, 3 exhaust? Or?
can i put 3.5 hdd in the mobo back plate? instead at the bottom
I think I answered this? Yes, it's possible but I've not tried it
Hello can i fit my old 80 mm fans in it ?
I don't believe so
Your not supposed to use the pci-e input in the bottom of your mobo, unless your running multiple gpus's. It is there to ensure they dont draw to much wattage over the 24pin, nothing else.
i think he just graduated from the verge lmao