Don't even have to do that in Beam if you know how to no lift shift, don't have to worry about shredding a gear in a video game, I wouldn't try it IRL though
modern train turbos have a clutch attached to the turbocharger axle that allows the engine's rotation to drive the turbo before spool pressure increases, making it a hybrid turbo and supercharger
@@thatonenigeriansformula it doesn't make any sense for road applications, at that point just make it a centrifugal supercharger. The entire point is that it's a 150+lb turbocharger impeller, so it's too heavy to get spinning off of just gasses. Meanwhile even massive turbos for cars that are impractically large can still be spooled by relatively small engines.
@@THESLlCK perhaps for trucks with large turbos that are hard to light until they reach higher RPM, like a centrifugal supercharger pulley connected to a gearbox and a one way freewheel mechanism
@@cs-gj3yf yea, that’s a centrifugal supercharger. I’m talking a freewheeling pulley to mechanically accelerate a turbo up to a decent speed to produce boost before exhaust gasses take over. Just like the train turbo, but a little different
I subbed finally cause I love the content lately!! Try the cruise ship turbo on something with a small disp. Too! Like a 2.0T GDI! Edit.. Twin scroll or single testing etc.. Be interesting to see. BTW never been on this game or app, let alone have I had a computer in the last ten years or so lmao so thanks for the fix!
I got an HP omen 40l for $1300 usd recently Can run the game smoothly at max graphics with 50+ mods installed. Good computer if you are in the market for one and want good performance but don't have too much to spend
@JM Production base game I get 100+ fps and with 50+ mods activated fps hovers at 80-100 fps with rare frame dips down to 60 fps and when you crash too many cars to bard at the same time the game pauses itself. But aside from that, you don't even know the mods are there in terms of performance
@@3ch0_17 I actually had an HP for my first computer when I was a kid. So thank you for the suggestion, it's much appreciated! I built a budget gaming PC back in the 10 years ago I mentioned. Well before that even but needless to say it's very outdated. May just gut and rebuild if it's not too bad. Might be able to get away with re using more than just the case fans etc.
If i recall correctly the gm emd 567 engine in a train uses one gallon per mile, cant remember if its us or uk gallon though as it was pre metric australian locomotive text.
I would like to see a single one of these blowing into a smaller turbo in a sequential system to help with response.. 😂 Also if it wouldn't shift early on a few of those pulls it could've helped it's own cause 🤔 Great video 👍
@@spookyreaper1702 It's not. It's shifting below redline and putting the revs down under the torque curve with each upshift. Turbo spools down and you have to wait for the boost to build back up. All alleviated by shifting 500 rpm later.🤷
Ah idk I drive a diesel with dsg 2.0tdi 250kw with a hybrid turbo. For my car it works like that. I guess for a manual it shifts slower so I agree with you both
Next time do compound turbos. They are better for diesel applications since the rpm range is so low on diesels. Twins are only good for top end. That’s why that one pulling the trailer struggled to get going.
10-4 GOOOD BUDDY!!!! ITS TRUCKIN!!! HIS NAME WAS SAMMI AND DROVE A SEMI UNTIL IT EXPLODED IN NEW MEXI AT THE TRUCKSTOP 63 RAPHALE''S DRIVE IN..... REMEMBER HIM?? HIS DOG WAS NAMED MACK CAUSE HE LOVED THE MACK BULLDOG R700 V12
On the pulling sections you should have had 10 gears instead of 5 seen those will apply more torque while having more control of the ever increasing speed.
These trucks have to be built by some engineers already. I'm sure the turbos can be bought on the internet. I'm sure we've all seen maximum size of turbo on a tuner that puts out 1200hp or more as a daily. Next up are the trucks, how about engineers put a bigger block in the engine bay of the truck to handle the massive turbo and pressure. And of course it could be daily driven.
Why do you shift so freaking early. Let it go all the way to red line then shift. You aren't letting the turbos spool up all the way by not doing that. Also it's infuriating
Imagine adding an anti-lag system to this so it doesn't loose boost pressure on the upshifts. I wonder how it's uphill performance would be then xD
No, better yet, sequential gearbox!
So a compound turbo setup for each of the two
Lol when loosing boost is still over 100 psi
You can do it easily, just editing back pressure turbo in engine archive. Try to erase one zero and I'll can do it.
Don't even have to do that in Beam if you know how to no lift shift, don't have to worry about shredding a gear in a video game, I wouldn't try it IRL though
Imagine 4 turbos next or more on the engine, that would be a mental torque monster!
and the engine was gone because of the torque.
If they even spool up ;)
Kaboom?
@@richardbhagan8949 Yes, Richard. Kaboom!
@@SolaricAngel116 Maybe it might be a tactical nuke
modern train turbos have a clutch attached to the turbocharger axle that allows the engine's rotation to drive the turbo before spool pressure increases, making it a hybrid turbo and supercharger
thats so sick, engineering like this would be so interesting in road racing
@@thatonenigeriansformula it doesn't make any sense for road applications, at that point just make it a centrifugal supercharger. The entire point is that it's a 150+lb turbocharger impeller, so it's too heavy to get spinning off of just gasses. Meanwhile even massive turbos for cars that are impractically large can still be spooled by relatively small engines.
@@THESLlCK perhaps for trucks with large turbos that are hard to light until they reach higher RPM, like a centrifugal supercharger pulley connected to a gearbox and a one way freewheel mechanism
@@christophercain7343 theres pro chargers, instead of running off gasses it runs off the crank
@@cs-gj3yf yea, that’s a centrifugal supercharger. I’m talking a freewheeling pulley to mechanically accelerate a turbo up to a decent speed to produce boost before exhaust gasses take over. Just like the train turbo, but a little different
Would be awesome to change the pitch lower of the turbo spool for more realism. This is a great mod!
That's a pretty big engine in your turbo, man.
Wow a fully loaded semi-truck going 305kmh, I wonder how these tires are holding.
Uh, *what tires?*
that's not a semi
@@fibecheee hum it is ?
Yeah, tires, and those engine block sure made from marvel metal stuff
That's not a semi-truck.
That's a semi train.
It did surprisingly lackluster with the hauling, it might work better if you put the 10 speed back in there
It would also help if they stopped shifting so early.
@@Demonslayer20111 this. The shifting was way early and super slow
It’s because of the 1.5/1 gear ration
Yeah, that was some terrible tall gearing. 1st was tall for most manual cars, 4th was taller than a sport bike
Least powerful truck in Dubai
MUYE?!
AYYYYYY MY GUYYYY IS HERE
Next step , these turbochargers on a Pigeon !?
Yes
Pigeon sucks
@@rian0xFFF I know where you live
@@MuYe hold up
@@MuYe he lives in Brazil
You NEED to upload these mods somewhere (make a thread on the forums or a discord IDK, those look like so much fun)
Heck yea... Everyone wants to try theese mod.. or maybe they arent mods he Just made theese him self
"how much boost are you running?"
"Yes"
That much torque would damn near alter the Earth's rotation
@@pacocinco at one point in the video, the dynamometer said 10,000lb-ft torque
@@datgamerboy123 around 5:50 it says 12k lb-ft
I can’t even begin to imagine how LOUD an anti lag system would be on that LOL
More defening than a ps4 fan spooling up
Like artillery cannons
The explosions would create thrust, win win
It should have more gears too use the torque better, in my opinion;)
i don't know if that's an opinion in this example
Turbocharger owner : a turbocharger that can save fuel The turbo :
I subbed finally cause I love the content lately!! Try the cruise ship turbo on something with a small disp. Too! Like a 2.0T GDI!
Edit.. Twin scroll or single testing etc.. Be interesting to see. BTW never been on this game or app, let alone have I had a computer in the last ten years or so lmao so thanks for the fix!
I got an HP omen 40l for $1300 usd recently
Can run the game smoothly at max graphics with 50+ mods installed.
Good computer if you are in the market for one and want good performance but don't have too much to spend
I got one for 120€ and I'm only missing a gpu to run at max graphics
@JM Production base game I get 100+ fps and with 50+ mods activated fps hovers at 80-100 fps with rare frame dips down to 60 fps and when you crash too many cars to bard at the same time the game pauses itself. But aside from that, you don't even know the mods are there in terms of performance
@@3ch0_17 I actually had an HP for my first computer when I was a kid. So thank you for the suggestion, it's much appreciated! I built a budget gaming PC back in the 10 years ago I mentioned. Well before that even but needless to say it's very outdated. May just gut and rebuild if it's not too bad. Might be able to get away with re using more than just the case fans etc.
This is so great. thank you. i think in reality the exhaust heat would melt the drivers face off
Love how the side display shows fuel usage. High speed test was about 1 mpg. Using like 3 gallons a minute at that rate
That’s wild lol
Average pre fuel crisis USDM
If i recall correctly the gm emd 567 engine in a train uses one gallon per mile, cant remember if its us or uk gallon though as it was pre metric australian locomotive text.
3:06 that truck lean was sick 👌💯
It's called driveshaft torque
Wow, you are really getting into the massive amounts of boost!
What a very satisfying sound that truck makes... I am pleased.
That semi looks like it's gone mad with the knowledge of the universe
I think those turbos produce considerable thrust by now.
I cant wait for the two step version man
I would like to see a single one of these blowing into a smaller turbo in a sequential system to help with response.. 😂
Also if it wouldn't shift early on a few of those pulls it could've helped it's own cause 🤔
Great video 👍
I hope the beam devs consider putting in heat visualisations like manifolds glowing red, turbos and even engine blocks in extreame circumstances
I highly doubt a truck engine would be able to provide enough exhaust fumes to even spin these, let alone build pressure but cool mod
My thoughts exactly, it would probably spin them but not fast enough to provide any meaningful boost
The short shifting was giving me fits.😬
For real. Every video like this they do the same thing. They short the shift and it costs them so much speed and acceleration.
It’s diesel and it’s not short. It’s shifting in its powerband
@@spookyreaper1702 It's not. It's shifting below redline and putting the revs down under the torque curve with each upshift. Turbo spools down and you have to wait for the boost to build back up. All alleviated by shifting 500 rpm later.🤷
@@spookyreaper1702 see that's the problem. Shift in the powerband means the next gear is now BELOW the powerband
Ah idk I drive a diesel with dsg 2.0tdi 250kw with a hybrid turbo. For my car it works like that. I guess for a manual it shifts slower so I agree with you both
That high speed pass is an excellent shot
Yes, i rewinded that several times! It's like airplane
you should make one so all of the pistons move at the same exact time
Обычный КамАЗ который возит арбузы в Таджикистане)
These videos make me wanna play this so bad. You have definitely earned my subscription!
Next time do compound turbos. They are better for diesel applications since the rpm range is so low on diesels. Twins are only good for top end. That’s why that one pulling the trailer struggled to get going.
10-4 GOOOD BUDDY!!!! ITS TRUCKIN!!! HIS NAME WAS SAMMI AND DROVE A SEMI UNTIL IT EXPLODED IN NEW MEXI AT THE TRUCKSTOP 63 RAPHALE''S DRIVE IN..... REMEMBER HIM?? HIS DOG WAS NAMED MACK CAUSE HE LOVED THE MACK BULLDOG R700 V12
The donuts were a nice compliment 😂
Not gonna lie but the semi looks kinda scary, like a mechanical tanker beast
They are some big ol turbys
Throw one of these turbos in a diesel pickup🤘
Lag for years lol or throw it on a 4 cyl car
The torque flex was insane
We got a long way to go and a short time to get there. I'm eastbound, just watch ol' Bandit run.
nice bigggg turbo
On the pulling sections you should have had 10 gears instead of 5 seen those will apply more torque while having more control of the ever increasing speed.
It's ready for the Pike's Peak hillclimb challenge.
All trucks should look like this!!
400 hp truck? "Nah."
4000+ hp truck? "I am listening."
OH MY GOODNESS!! I thumbs up before the video started playing.
This has "WhistlinDiesel" written all over it.
Yeah don't stand next to those turbos, you gonna be compressed meat !
I have heard gas sniffing addicts but this just something else
greta is going to be super mad
In the background you hear Clarkson shouting POWEEERRR!!!
So that's how the Coca-Cola Christmas truck does his deliveries...
Can you add this some nitrous shot , testing for multiple PSI , in next video😂
Hell yeah!
I want this thing!
this has to be one of the most intimidating things i have ever seen
Is no one going to mention that this thing made more than 450 PSI of boost?!
Came back 2 months later to find the turbos still spooling
Yeeeessssss. Now more black smoke!!!!
i love the fact that it backfires
totally safe to shove *450 PSI* through the intakes definitely
You need titanium for that engine block to accommodate 450PSI of boost.
Must be an amazon truck
They always make their deliverys on time.
Those mudflaps were holding on for dear life 😂
Twin Turbo's?
No, Train Turbo's
These trucks have to be built by some engineers already. I'm sure the turbos can be bought on the internet. I'm sure we've all seen maximum size of turbo on a tuner that puts out 1200hp or more as a daily. Next up are the trucks, how about engineers put a bigger block in the engine bay of the truck to handle the massive turbo and pressure. And of course it could be daily driven.
Yeaaahhhh they’re actually a lot bigger than that
I prefer some engine to go with my turbos, not too much tho :P
It could pop flames which is insane for a DIESEL
Why do you shift so freaking early. Let it go all the way to red line then shift. You aren't letting the turbos spool up all the way by not doing that. Also it's infuriating
This is my asmr
greta will be super mad
This thing has freaking Bolide gearing 😂
If this truck ain't irl it damn well should be
Sounds like k700a turbo
it's kind of funny how you can modify the game's 3d to do this kind of thing but you can't change the boost threshold or turbo lag 🙃
You of course can do both of these things, mustard has done them both in the past
You clearly haven't played the game
THIRTY
ONE
BAR
😂😂😂
It's as fast as the truck from Big Rigs: Over the Road Racing.
11k ft-lbs?? Gotta put these turbos on the v24.
Western Champlin has entered the chat.
Now for the ship turbo 🚢
Give this truck to a Jamaican driver!
when the owner took the force in words "force induction" seriously
I wanted to see the high speed crash with that trailer so bad!
Add an anti lag on the truck that thing would be an portable flamethrower
How are you doing these mods? Would be cool to play with some of these too!
Yes, more!!!
When he tapped it the very first time it sounded like the sound from Mario carts when you finished
Mmmhm. That sure is a tasty beverage
Quality content
TIL that trains have turbochargers.
I would be pissed off on this
Now THOSE are hater pipes.
Acho que isso tem Torque até para andar no Sol
"-How many lag this system have?"
"-Yes."
what? 300km/h? DAMN!!!
Trouble spooling it seems... Maybe try a smaller turbo and a train turbo together. Hopefully the smaller turbo helps the system make boost sooner.
An actual train turbo would spool much faster than this did, they are clutch operated so it builds boost sooner
@@southpineshooligan Not only that but it has an actual train engine spooling it. Not a truck engine trying to spool up oversized turbos for it.
400+ PSI goddamn
Needs compound turbos and more gears 18 speed double overdrive and what ever you want in the rear end for top speed
Range measured in Yards. This is where its at.
lmfao it started spinning its wheels going uphill while pulling a load
1 mile to the gallon 🤣😳