REV'IT! Seesoft Back Protector Buying Guide at RevZilla.com
Вставка
- Опубліковано 3 жов 2024
- REV'IT! Seesoft Back Protector Review www.revzilla.co... The REV'IT! Seesoft Back Protector insert is a welcomed addition to the REV'IT! armor family that offers CE Level 2 protection. The Seesoft back inserts use a combination of Nitrile Rubber and Norsorex to create impact protection that is durable, lightweight, breathable and approved for multi-impact protection. The Seesoft armor is constructed of a 4-layer system that also provides protection from obtuse or angular impacts, which is a feature not often found in armor protection. The materials used in the Seesoft back pads also offers excellent temperature stability over a wide range. The SeeSoft protectors are offered in 3 different shapes and in several sizes. The Seesoft Type KN is for replacement Knox armor, the Type ST is for replacement SaS-Tec armor, and the Type RV is specifically for REV'IT! products. Each Type is offered in a variety of sizes to give the best fit for any REV'IT! jacket or any other jacket that might take a Knox or SaS-Tec back protector.
Thank you for the instruction, I wasn't sure how to put it in the jacket, you showed that in this video.
The Seesoft stuff is definitely lighter than D30 and boasts nearly identical protection. Really cool tech if you ask me! -CK
black goes to the back! nice one. thanks because i wasn't sure which way to put it in. and the guy in the store told me wrong. greetings from germany and please continue with your reviews! :-)
It's the only logical way to put it into the jacket.
Yeap, this is why I am here too.
should be included with the jackets, bullshit having to order it seperate and figure out which size.
They have size guides
It depends on the shape. Some back protector pockets extend down further than others. If you want something that is definitely lower, try the Tryonic Feel 3.0 Back Protector. -CK
Hi. I couldnt find the chest inserts for my OFFTRACK Jacket and for my suprise the alpinestars nucleon chest inserts fitted perfectly. Looks like the nucleon inserts are CE-1. I think the only complaint refers to the weight of the nucleon chest pads compared to rev'its pads.
I am also wearing backpack ... :) backpack one time maybe it did help me during bicycle crash ...
Nice presentation with unfortunately lots of blabla about buying and sizing but no presentation of the protector itself. What are these layers good for? Can you remove one if you do not need that much protection? I wish you could give more info about the product and less advertising....
69indigoblue The REVIT See Soft CE-Level 2 back protector is designed to absorb multiple impacts without compromising on comfort, ventilation or freedom of movement. The highly impact-resistant blend of Nitrille and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE Certified to the highest level of prEN 1621-2:2010 level 2.
In the case of severe angular impact, the individual Memory Foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area and therefore minimizing the energy that is transmitted to the spine and back. The Seesoft back protector performs extremely consistently in all weather conditions and is unaffected by temperature ranges from -4° F to +104° F (-20° C to +40° C). The layers are not removable. -Hi-Viz Brian
* www.webbikeworld.com/r5/revit-seesoft-back-protector-review/
do these protect the lower spine? I am worried about falling on my hips and/or lower spine in a crash.
Thanks Brian
You got it! -Hi-Viz Brian
How does thus compared to nucleon
Hello Antony and Gents, I have an option to buy the RV as promo. However I consider safety before the price. My jacket is the Alpinestar gunner and the original is the nucleon KR. I would like to know if these are similar in the protection they provide. I know that they are both CE2 but there are CE2 and CE2. Thanks a million for fast answer.
The protection is very similar between the Seesoft and the Nucleon KR-2i. There's no need to change from the Nucleon. -DrewZilla
How do you even wash these? Mine is getting nasty around de edges from the front
We usually just recommend occasionally washing it down with a damp cloth and letting it dry, although we haven't really hear of many getting too gunked up. If you want more detailed washing instructions, you may want to reach out to REV'IT! directly and see what they have to say. If you have any other questions or concerns, please feel free to reach out to our Gear Geeks at 877.792.9455 or CS@revzilla.com. Ride safe, -Pat
Can I use it in my alpinestars gunner wp jacket?
Yes, you can use it in your Alpinestars jacket, but it won't be the exact shape of the pocket. -DrewZilla
They look like they're going to fall to pieces..
It's made of loose layers...
Does it matter if its soft or hard...I have one of these, but i am thinking about hard shell...
Not really sure what you are referring to, but it might be a good idea to talk it over with our Gear Geeks at 877.792.9455 or cs@revzilla.com. If you have any other questions or concerns, please reach out to our Geek Geeks at 877.792.9455 or cs@revzilla.com. Ride safe - Pat
@@RevZilla I was talking about material.. This one is made out of soft foam and other (as dainese wave d1 g2) are made out of solid plastic. Does this matter or the only thing that matters is CE level.
RevZilla Is there a size of Seesoft protector that will fit in Dainese jackets, in place of the G1 or G2?
***** It may be possible, but Dainese sometimes changes the overall dimensions of their back protectors slightly. If you already have a Dainese jacket, measure the length and width of the back protector pocket and compare it to the Seesoft Size Chart* linked below. -DrewZilla
*www.revzilla.com/motorcycle/revit-seesoft-back-protector-insert#size_chart_tab
I could insert the kn model to a Rev'it Phoenix L Jacket?
Every REV'IT! jacket will list the exact back protector size/shape needed just above the pocket where you place the insert in. If you check your jacket you can identify exactly which model will work best. If you have any other questions or concerns, please reach out to our Gear Geeks at 877.792.9455 or cs@revzilla.com. Ride safe, Pat
I have the Rev'it Seesoft RV04 matched to my Rev'it Vigor jacket. I'm planning to get the Rev'it Airwave 2 soon, which is also compatible with the Rev'it Seesoft RV04. However, I expect to use the Vigor a lot more than the Airwave. Question: Would it be practical to get a separate back protector for each, or should I just keep one and switch between jackets when needed?
Both options are valid. If switching jackets a lot though, I would just invest in a second back protector. -DrewZilla
@@RevZilla My concern also though is if the jackets themselves would stand up to the repeated removal of the protector, considering it's typically a snug fit in there.
Will an seesoft ST back protector fit in any way into the rev'it nautilus jacket?
RoofTopCamper No, you'd have to cut the ST protector, and even then it wouldn't fit well. It's best to use the RV-style Seesoft Back Protector in the Nautilus Jacket. -DrewZilla
On the video for the Tornado 2 jacket, Anthony said the back protector would be the Seesoft RV, but the sizing chart on your site (www.revzilla.com/assets/0000/5918/20140113-Seesoft_Fitting_Chart_-_Update.pdf) only lists the Tornado jacket, not the 2. Is it the RV and if so which size? Thanks.
We list the proper sizing on the jacket page, which I've included below:
-Type RV / Size 04 fits SM-MD
-Type RV / Size 05 fits LG-2XL
-Type RV / Size 06 fits 3XL-4XL
Hope this helps! -DrewZilla
*www.revzilla.com/motorcycle/revit-tornado-2-jacket
*www.revzilla.com/motorcycle/revit-seesoft-back-protector-insert
@RevZilla, what is the total thickness of RV models?
The Seesoft RV models are 2cm thick (3/4 inch). -DrewZilla
*www.revzilla.com/motorcycle/revit-seesoft-back-protector-insert
I have got an old defender gtx with no info about protector size. It only says L for large. Does it mean im screwed?
No, you aren't screwed. The older Defender GTX used SAS-TEC armor. Held also has used the same SC-1/12 size, so you can get Level 2 protection from the Held Back Protector in size small (SM: 49cm x 33cm). You can measure the back protector pocket of your jacket to be sure as well. -DrewZilla
*www.revzilla.com/motorcycle/held-back-protector
@@RevZilla I have just ordered sastec 1/12. Thx RevZilla :)
You're welcome!
I got Rebel Leather Jacket size 52 what size and what type seesoft back protector do I need to replace. Do you ship to New Zealand.
Vic
NZ
You're looking at a KN 106 Seesoft back protector. Unfortunately, Rev'It doesn't allow us to ship their products to New Zealand. -Hi-Viz Brian
RevZilla
You sell the jackets though *Grrr*
Is see soft reactive armor like the Sastec or d30? Thank you.
Seesoft armor is not molecular like SAS-TEC and D3O. It uses layers of memory foam to achieve its protective properties. -Hi-Viz Brian
RevZilla Well I for one will not be buying it then! Thanks for the rapid response!!
Yolo! -Hi-Viz Brian
hmm interesting...
wondering how heavy would klim d3o viper and these seesoft protector of the similar size?
since i had just boight a teknic supervent pro jacket from revzilla... i presume its gonna be abit on the heavy side, thus back protector upgrade shall have its weight into consideration.
thanks
hi. any idea what protector will fit a sand jacket size L ? thanks.
+rationalityfirst Yep! Per the Seesoft Size Chart (rvz.la/1LBibGn), the original Sand Jacket accepts the Seesoft KN106 (for all sizes), and the Sand 2 Jacket in size Large accepts the Seesoft RV05. Hope this helps! -DrewZilla
+RevZilla thanks a lot! I wanted to be sure, as I heard Anthony talking about the Sand jacket at 4:15
I've just bought a Ducati branded "Company 14" XXL leather jacket. It's made by Rev'It! But it's not on the list. Any idea what model / size of Seesoft would be a fit for it ? It came new without any back protector in the pocket.
+boxwoodgreen Is it made by REV'IT! or is it made by Dainese? Ducati is recommending a Dainese Wave G2 back protector, but perhaps you can measure the length and width of the jacket pocket to determine its shape. Let me know what measurement you get! -DrewZilla
RevZilla It's made by Rev'It!. It's in my work office but I'll get the measures tomorrow ! Thanks for fast reply.
Whats the cost to post the RV 05 to the UK?
Why can I not order this, as you do have retailers in the UK?
I'm sorry, but due to manufacturer restrictions, we are unable to ship REV'IT products internationally.
We do accept orders with an International billing address that are shipped within the US if you have someone who can receive your package for you. Additionally, there are third party shipping services which can provide you with a US address we can ship to. This service will then forward the package to you abroad. Two companies our customers have had success with in the past are MyUS.com and Aramex.
Very sorry for the inconvenience, let us know if we can be of any further assistance!
Correct. Rev'It does not allow us to ship their products internationally when a distributor or retailer already exhists in the country. -Hi-Viz Brian
RevZilla
Can you tell me who is the UK distributor for the UK that will sell me the back protector please?
I sure can. - www.revit.eu/en/#/dealerlocator -Hi-Viz Brian
RevZilla
Was dealing with a UK company called Ghostbikes they say their supplier is unable to get the protector because of manufacturing issues. Have now sent the jacket back and confirmed today a refund as other protectors wont fit. Will now go with another brand of jacket.
Backwards