I had finished my install on my car about 8 months ago. At that time I was referencing your videos religiously for help and asking questions in live chat. Without your channel, it would have been a lot harder. You're always so thorough Dean. I have to admit after my car stereo was finished I had stopped watching for a bit because I had started on a woodworking project that required help from other channels. I just saw this pop up in my recommendations and I clicked on it. I had forgotten how many useful tips and problem-solving techniques that you always implement. Just now I learned some new things and you guys gave me some inspiration as I have hit a wall. Thanks again.
i'm so glad you guys have added these series in one long video. I hope it adds to your ad rev. Its so calming to sit through these and watch them start to finish. awesome work as always.
I hate that there’s no place of this quality and precaution in my area. Every shop in my area, even the nice ones suck. I went to a recommended shop and they couldn’t even install speakers well… sloppy and terrible work. I love to see your guys videos
Had me looking cross eyed after talking about the ohms. That part is so confusing for me it's unbelievable. But like I always will say good video and I enjoy watching. I might get a job installing systems in cars. I have learned alot from you guys. I install truck and car hitches and it requires wiring. Since I been watching your videos my wiring looks more uniform. I'm a do it once right the first time kinda of a guy and enjoy doing what I do. Thanks
It's amazing how long some crappy things last! That power wire was in such bad shape ! If the sheathing failed because of the exhaust it would've been sparky. I've already watched the difference sections but waking up for the day watching the whole thing with my coffee was a treat!
Man, some OCD amp wiring! It makes me miss car stereo installation I did back in the late 80's early 90's. I wish I had those gadgets back then. If you were in my state, I would bring my vehicle to you just to put a new system in...
Dean I saw wat u did on the 4ch. I went to rockfords site and looked at the front of that amp. U chngd the spkr wire output too. So i see why u had the input rca's like that! Idk if u said anythin but thats cool man. U sneak a lot of different stuff in there.
@@tatialo37 it's all good. I didn't look at the time length when I clicked on it. I watched all but the first part then seen this. Lol. I can deal with 5 to 25 minute videos but any longer, I get antsy. Lol
why not use the factory provision just to the right and up from where have drilled thought the fire wall there is nipple for you to drill thought the the fire wall with no obstructions
That would be nice 👍🏼 to take a picture with these famous guys. I would like to buy something from them with the autograph ✍🏼 and 5 Star 💫 logo. (Good luck hope you can guy.) 👍🏼 from Vic in West Covina Southern California
Coaxials should never be used to replace a factory components. Always replace components with components. If you’re on a budget, you definitely cannot go wrong with the kenwood Kentucky fried chickens.
You guys are an amazing team. Thanks for sharing your knowledge, training, and experience.
You make it look so easy!!! Im watching True Professionals!!
I had finished my install on my car about 8 months ago. At that time I was referencing your videos religiously for help and asking questions in live chat. Without your channel, it would have been a lot harder. You're always so thorough Dean. I have to admit after my car stereo was finished I had stopped watching for a bit because I had started on a woodworking project that required help from other channels. I just saw this pop up in my recommendations and I clicked on it. I had forgotten how many useful tips and problem-solving techniques that you always implement. Just now I learned some new things and you guys gave me some inspiration as I have hit a wall. Thanks again.
i'm so glad you guys have added these series in one long video. I hope it adds to your ad rev. Its so calming to sit through these and watch them start to finish. awesome work as always.
Nice to be able to watch the whole video. Thanks Dean.
Are you from The Cure!! Love your music!!!
Love your attention to detail and your style, great video - again!!
I hate that there’s no place of this quality and precaution in my area. Every shop in my area, even the nice ones suck. I went to a recommended shop and they couldn’t even install speakers well… sloppy and terrible work. I love to see your guys videos
Had me looking cross eyed after talking about the ohms. That part is so confusing for me it's unbelievable. But like I always will say good video and I enjoy watching. I might get a job installing systems in cars. I have learned alot from you guys. I install truck and car hitches and it requires wiring. Since I been watching your videos my wiring looks more uniform. I'm a do it once right the first time kinda of a guy and enjoy doing what I do. Thanks
Yep gotta know your Ohms .no worries!! its easy - once you know it , ya know it . You'll laugh at yourself later on after it makes sense .
It's amazing how long some crappy things last! That power wire was in such bad shape ! If the sheathing failed because of the exhaust it would've been sparky. I've already watched the difference sections but waking up for the day watching the whole thing with my coffee was a treat!
this was great.
Man, some OCD amp wiring! It makes me miss car stereo installation I did back in the late 80's early 90's. I wish I had those gadgets back then. If you were in my state, I would bring my vehicle to you just to put a new system in...
awesome video. i've learned a lot. too bad your shop isn't near me. i def would let u install my set up
You guys are amazing at this. Would love to see a video on a full speaker replacement on a G37 (or similar) with factory Bose.
very good , video , boy is you baby
Dean I saw wat u did on the 4ch. I went to rockfords site and looked at the front of that amp. U chngd the spkr wire output too. So i see why u had the input rca's like that! Idk if u said anythin but thats cool man. U sneak a lot of different stuff in there.
I always like to see these kind of videos, but why wouldn't you have used 7" Kenwood excelons for those huge cutouts?
great video you guys are awesome...
Dean and fernando, what amps do u prefer Rockford or audio control?
They like both but I believe Audio Control is their first choice.
Great job
Dammm crazy i was just 5 and they already had a whole life
you guys really make me miss being an installer
You guys can make a mountain out of an ant hill lol great job 👍👍
Good job!!!!
"You will heal.
The speaker never will."
- Dean
Your poor hands Dean! Everytime!
Part 1 to the other 20 parts I already watched? Lol
Dean did mention that he would combine the video for our benefits!!!
@@tatialo37 it's all good. I didn't look at the time length when I clicked on it. I watched all but the first part then seen this. Lol. I can deal with 5 to 25 minute videos but any longer, I get antsy. Lol
I realised part way..... wait haven't I watched this.
All good 👍🏾
I'm curious if you wired one sub parallel and the other in series , What would the final ohm load be ?
question how do you normally do your remote wire for 2 or multiple amps?
What sub box is that?
30 minutes to 35 minutes in the video is that a kicker warhorse on the wall behind Dean
If you have a system with over 30,00 watts those rca's will vibrate and come apart that's why people put tape on them.
remember installing a premiere p1r with infinity kappa's and sound stream amps back the
why not use the factory provision just to the right and up from where have drilled thought the fire wall there is nipple for you to drill thought the the fire wall with no obstructions
I am in the process of by highes and lows amp and cant decided
That’s cool. Fellas you mind if i come by to say hi ... been watching your channel for a while now. 😷😎🤝
That would be nice 👍🏼 to take a picture with these famous guys. I would like to buy something from them with the autograph ✍🏼 and 5 Star 💫 logo.
(Good luck hope you can guy.) 👍🏼 from Vic in West Covina Southern California
Coaxials should never be used to replace a factory components. Always replace components with components. If you’re on a budget, you definitely cannot go wrong with the kenwood Kentucky fried chickens.
Coaxials can be better
come on.......that sub enclosure wasn't really like that when you took it out, there's no way somebody did that! lol
I'm gonna put a 12. 😂
The louder the beater = the smaller the peter.
2008-2009 I was hanging out in Iraq and 2009-2010 I was hanging out in Afghanistan
👍
wow that subwoofer replacement installed the way it was, that’s just plain blasphemy.
2008-09, I was in the same position of paying over 4 bucks a gallon as we are now. Thanks Obama.
Just say no to Infinity speakers.
1 street
Why all the part 1-? Then here is full video this isn't car audio fab kitchen 🙄 please STOP THIS...
You must be new?