Thank you. Most videos that I found showed how to connect to the Phantom and calibrate, but hardly any went through a detailed description of the transmitter. Now I am ready!
Thank you for taking the time to create this video for "the rest of us" out there! I realize that it is a lot of work to create even the simple videos and your hard work is very much appreciated by people like me. Thanks again!
By far, the best detailed, step by step instructions on this subject. including describing where the S2 and S1 positions shouls be and what each position represents. Thank you and that's the reason I subscribe to the Drone Camps RC channel!
the best tutorial and step by step instructions i have seen in UA-cam. it is really help for a new comers to have a detailed descriptions . thanks Drone Camps RC.
+Drone Camps RC great video ,what is the music in the intro? I have really needed these videos because i just bought my phantom 2 days ago, cant wait till it gets here.
Ive just received a second hand Phantom 2 and I'm currently reading through the online manual. In the manual it states that when you're in Naza M mode, the upper right hand switch on the transmitter have the three following settings - GPS, ATTI and Manual. However, I note in your video that the three settings on this switch are GPS, ATTI and ATTI. And that makes me a bit puzzled. If what you say is true, then how do I access manual flying mode?
Hi, thanks for the video. I have a question. My controller seems to be inverted. My right stick is up and down for altitude and left and right for strafe or sideways. And my left stick does the forward, backward and rotation. I bought it used off from someone that just learned to fly it that way, but I much prefer your setup, where altitude and rotation are on the left stick. Is there a way to change this setup on my controller?
I tried to calibrate the sticks in the RC assist firmware. After plugging in the mini USP to the controller and then to the PC, I opened the firmware, turned on the controller and when I moved the sticks to calibrate, the arrows did not move. I repeated each follow along step by step again with no results. Any idea what I may be doing wrong
My PT software shows a second calibration on the right side of the screen. What's up with that? Also, Phantom directions advise controller antenna straight up...on one of your vids you have it horizontal. Please advise.
I've purchase a new phantom vision 2 and when I power on the quad for the first time,I hear the first beeps, but don't hear the last 4 or 5 beeps. Do u think something is wrong with the quad.
I need help with my DJI Phantom 2 Vision Plus; I’m not able to see on my iPhone what the bird sees while flying. Everything else works just fine but being able to see what I’m recording isn’t a possibility any longer. Any suggestions?
Hi please does this apply to the phantom 3 standard or is this different the toggle switches I mean I got the s1 sorted out still a little confused with the s2 switch can someone help me with this please there's so much information on the phantom 2 remote but not for the phantom 3 standard thank you
Drone Camps RC thank you maybe you could do a video on the phantom 3 standard as well that would be awesome I love ur channel I have subscribed very very helpful thank you
Hello. I have the phantom vision plus V3. The remote controller has its own built in battery. When I go to charge it, does the remote have to be switched on ? Or off please?
Drones Manawatu Hi, Charge the remote, switched off. It will show red light, when fully charged, light will show green, when you switch on all four green lights mean fully charged. Hope this helps......
Since I've owned my P2 when I switch the controller on I get a red light, no beep. It's been flying fine. Just wondered if I had an early version or I needed to upgrade something.
just downloaded the software (PC) mine is read, asked me to login but I did not, with the controller plugged in and on, I have no indication of inputs from the controller and the software panel is red. and the calibration button does not do anything? The info page shows no input from the controller. Powered up the remote and drone and the drone responds to the input correctly.
Hello can anyone help me I bought a phantom V3 controller for my P2 vision plus. I haven't upgraded my software yet at all. but I bound the controller to the Phantom it works great the dail for the gimbal control. but as soon as I turn on my phone for video feedback on the vision app the dial does not work. can someone help me.
Finally...someone who knows how to explain stuff...you answered questions I've had for a week in less than 30 seconds...Thank you!
Your explanations are the best thing to calm the nerves of a new P2V+ pilot! Very, very complete and detailed. Keep up the good work!
Ed Murphy we appreciate the kudos. Fly safe Ed!
Thank you. Most videos that I found showed how to connect to the Phantom and calibrate, but hardly any went through a detailed description of the transmitter. Now I am ready!
Thank you for taking the time to create this video for "the rest of us" out there! I realize that it is a lot of work to create even the simple videos and your hard work is very much appreciated by people like me. Thanks again!
By far, the best detailed, step by step instructions on this subject. including describing where the S2 and S1 positions shouls be and what each position represents.
Thank you and that's the reason I subscribe to the Drone Camps RC channel!
the best tutorial and step by step instructions i have seen in UA-cam. it is really help for a new comers to have a detailed descriptions . thanks Drone Camps RC.
You are a great instructor. you'd be a very good flight instructor in a 172 Cesna
You kept everything simple.
God Bless
Paul
PJB7 YT Thanks for that compliment. That means a lot sir.
+Drone Camps RC great video ,what is the music in the intro? I have really needed these videos because i just bought my phantom 2 days ago, cant wait till it gets here.
Thanks for the easy instruction, i don't have to read the manual again.. keep it up.
thank you for doing this video..just snagged a phantom 2 three years later :P
Ive just received a second hand Phantom 2 and I'm currently reading through the online manual. In the manual it states that when you're in Naza M mode, the upper right hand switch on the transmitter have the three following settings - GPS, ATTI and Manual. However, I note in your video that the three settings on this switch are GPS, ATTI and ATTI. And that makes me a bit puzzled. If what you say is true, then how do I access manual flying mode?
what the compliance when it comes to Australia, same as the US?
Thanks...good tutorial...I will do this asap!
Good job,thank you....
Hi, thanks for the video. I have a question. My controller seems to be inverted. My right stick is up and down for altitude and left and right for strafe or sideways. And my left stick does the forward, backward and rotation. I bought it used off from someone that just learned to fly it that way, but I much prefer your setup, where altitude and rotation are on the left stick.
Is there a way to change this setup on my controller?
I tried to calibrate the sticks in the RC assist firmware.
After plugging in the mini USP to the controller and then to the PC, I opened the firmware, turned on the controller and when I moved the sticks to calibrate, the arrows did not move.
I repeated each follow along step by step again with no results. Any idea what I may be doing wrong
My PT software shows a second calibration on the right side of the screen. What's up with that? Also, Phantom directions advise controller antenna straight up...on one of your vids you have it horizontal. Please advise.
Nice tutorial!
After i calibrate the sticks, i get 0, 0, 13, 0. Any explanation?
tsakirakose46 might want to calibrate again.
I've purchase a new phantom vision 2 and when I power on the quad for the first time,I hear the first beeps, but don't hear the last 4 or 5 beeps. Do u think something is wrong with the quad.
I need help with my DJI Phantom 2 Vision Plus; I’m not able to see on my iPhone what the bird sees while flying. Everything else works just fine but being able to see what I’m recording isn’t a possibility any longer. Any suggestions?
Can somebody tell me how i can get the app...ive gone to the DJI site, and they only had Phantom 3 and up apps
Hi please does this apply to the phantom 3 standard or is this different the toggle switches I mean I got the s1 sorted out still a little confused with the s2 switch can someone help me with this please there's so much information on the phantom 2 remote but not for the phantom 3 standard thank you
No . Phantom 2 only
Drone Camps RC thank you maybe you could do a video on the phantom 3 standard as well that would be awesome I love ur channel I have subscribed very very helpful thank you
Hello. I have the phantom vision plus V3. The remote controller has its own built in battery. When I go to charge it, does the remote have to be switched on ? Or off please?
Drones Manawatu Hi, Charge the remote, switched off. It will show red light, when fully charged, light will show green, when you switch on all four green lights mean fully charged. Hope this helps......
yep it worked, thanks
hey i like ur video
Hi ,I just wanted to find out the cost of your product
Since I've owned my P2 when I switch the controller on I get a red light, no beep. It's been flying fine. Just wondered if I had an early version or I needed to upgrade something.
like to know this question too
How can you switch to headless mode?
just downloaded the software (PC) mine is read, asked me to login but I did not, with the controller plugged in and on, I have no indication of inputs from the controller and the software panel is red. and the calibration button does not do anything? The info page shows no input from the controller. Powered up the remote and drone and the drone responds to the input correctly.
You didn't say what ATTI mode is or does. Please someone explain?
Hello can anyone help me I bought a phantom V3 controller for my P2 vision plus. I haven't upgraded my software yet at all. but I bound the controller to the Phantom it works great the dail for the gimbal control. but as soon as I turn on my phone for video feedback on the vision app the dial does not work. can someone help me.
Hello can i do that with my phantom 3 standar controller?1? SOMEONE KNOW? +Drone Camps RC
my transmitter wil beep ones help
When i plug the controller into my pc i get no results when i move the sticks any idea why?
Crazedisme Same for me as well
thank you, now it works!!
mine beeps 3 times
I got lines on my camera what is that..don't use it now because of it