+iftibashir it sure did! could you also do, or do you also have a video tutorial on how to use the GPS follow me mode and point of interest mode on the phantom 2 (vision+)?
Excellent Explanation! Thank you for taking the time and effort. Your video is by far the best one I have seen and I have been sorting through these videos for several days now.
I look forward the the Gimbal unboxing and review as well as how the entire setup works with the GoPro. Thanks for ensuring your videos of the highest quality and enjoyable to watch!
Just bought a gently used P-2 with Hero3+ and 3d gimbal. This series is invaluable for my startup. Looked through dozens of videos to find you. Thanks.
Great video, really clear and helpful. According to the DJI Wiki, the Course Lock can also be locked during flight, by switching the S2 switch 3 to 5 times to record the current nose direction (and new home direction). When you do, the LED flash green rapidly. You can then fly along side a biker record the direction, and switch to CL. You can now maintain the direction while turning the quadcopter to point the camera to the biker. Don't forget you also have a new home location.
I found a bit more, but have not tested this: if you switch 3-5 times between Off and Course lock you set the new course lock. If you switch 3-5 times between Course lock (middle position) and Home Lock (bottom position), you set a new home lock. I guess I was doing from Off to Home, setting both at the same time.
First let me say thank you for producing this video. I watched a lot of videos about how to get to Naza M mode, You are the only guy that said,( go to the DJI site and download the Assistant software). Also the only guy that said, ( if your toggles are left up then you will stay in the Phantom mode). I haven't installed Naza M mode on my Phantom Vision Plus because I didn't want to lose the Phantom mode. And I always thought , why didn't they leave it so you can toggle in and out of phantom mode. And nobody, I mean nobody else that produced this tutorial video said that that is what happens. So thank you , I have subscribed to your Channel and I'll check out your other videos
I have to thank you for the great video and for the clear and precise information. I had been putting off turning on the NAZA mode and testing the fail-safe system but after watching your video I felt confident enough to give it a go. I really enjoy flying with the new features and I tested the fail-safe six times last night, brilliant.
great video mate, really explained a lot. One of the few videos that explains the different modes, how to turn it on and straight to the point. Cheers.
Hey Guys, Absolutely the BEST explanation of IOC yet, why is this not on DJI's site? Good solid background on CL, HL, ATTI and FAILSAFE. Now I can go out and practice. Thanks again Great Job!! Please do a video on Ground Station for the Phantom Vision 2+
I must say, you have the best videos out there for DJI. Many thanks for taking the time to make these. You are helping create a safer environment for those of us that care to take the time to learn. Subbed and liked
I watched many many videos about those mode and it was so hard to understand for me because im not a native english speakers and i don't speek english well. All those videos has bad sound quality or not sharpe or confusing talk or etc. But now i found the best one. Very clean voice super sharpe video and usefull information i hope more videos comes soon for beginner. Thank you !!!
nice job explaining what should have been in writting! after all its not bubble gum we bought here, this stuff needs comprehention b4 u take 1600.00 euros out for a flight...nice job
Thanks bro. Had a panic attack on an early flight when I completely lost orientation so this info is great. As you say, the documentation is a bit lame on such a great bit of kit.
Very god video. You exsplain god and show how to do it. I drive Dji Phantom 2 vision+. But I understand that I moust go Into Naza mode and get manuell mode. Its god to have if somthing happen in Gps mode. I mean if satellitt fall out or somthing then Its a way to get controll over phantom agein. Very Nice video! Thanks.
Dude!, excellent video!. I don't know why i had to sift through several crappy videos before coming to yours!. That guy in the California videos (guy with accent in the field) somehow always seems to come higher than yours. DJI should link your video to tutorials!!. Thank you again.
Fantastic video, it's a shame DJI doesnt provide such useful & informative videos anymore. For the Phantom 1 they have plenty good videos, but for P2 it's all quite rubbish. This should be the "OFFICIAL" video. Also it's a pitty it doesnt show up immediately on UA-cam when you search for quality instructional video, I came here after reading your post on DJI Guys . com.. Excellent stuff. I am a beginner with any drone and this has convinced me to start on Naza-M ! :)
Hello! Amazing video! I have recently got a phantom 2 (might be a bit late to the trend😂) the DJI assistant app isn’t working, I have windows 11 and it doesn’t connect, stating to connect the controller, everything is on and I’ve tried different cables, thanks!
Thankyou for a great tutorial just one question i think the only mode i would probably use is the home lock. once the phantom is in naza mode do i still have to enable it in the advance settings or is the home lock automatically enabled. thanks again regards
Would you have any idea why the left switch doesn't go to Homelock in the PT2 app when you put it on HL on the controller, It stays at Course lock and doesn't move on.
Hello tech..I have a question: I just got my phantom 2 and when I use to turn it on, it would make a few sound and now it just make one sound when I turn it on...is my phantom going bad?
I got a new phone , And I can't find the original DJI Vision + app in the Play Store anymore. Is there another app that I can use, but only one that you would recommend.
So Without naza mode enabled the switches on the left do nothing? I prefer home lock so can I leave the switches in home lock mode? Will that effect anything?
I did this and can't get my motors to start! I've recalibrated everything like three times each! Did get it to start once, but not repeatedly... what's wrong? I even went back into Phantom mode with no better success! Before switching to NAZA it started and flew perfectly.
Thats probably just co-incidence - most enable NAZA mode due to the extra features and functions it provides. For example, after a flight I can simply flick to Home Lock, and by holding the right stick back the craft will come back to you irrespective of the direction its facing. Very useful - especially if the Phantom is a long way away from you and you become dis-orientated. Ive had many flights in NAZA mode and all have been spot on. The main reason for flyways is those who do not wait long enough for good GPS lock, and interference from other radio equipment.
Hi Ifti. what did you change? Wasn't IOC enabled by default? I am using the Naza-M V2 on a home build, and don't know how the Phantom is set up, but I can see that your transmitter is aware of the Home Lock and Course Lock modes. Are they not enabled by default on the Phantom?
No they are not enabled by default. By default those switches didn't do anything. You need to connect the Phantom to the DJI assistant and press the 'Phantom' button in the top corner, as shown in the video, to set it to NAZA mode - then enable IOC controls.
Very awesome video the best one I came across by far but I'm still not clear on how to download the driver and every thing else I need to do to be able to do this. I've watched videos and they are saying things like unzip this and zip that and I haven't the slightest clue on what any of this means and I'm not sure what to do when I come to zip or exe can some one please help me out with this cause computer terms and big words like zip are not in my vocabulary 😐
My advice to you is to leave your Phantom the way it came from factory and keep enjoying it to the maximum. If you have no clue of what to do or how to do it, you might not want to mess with the aircraft software. What is the purpose of changing something that is working good to explore the unknown! Most fly aways happens after people start messing with stuff that they don't even understand. Stay away from that. What is the benefit of messing with those settings? My Phantom 2 not vision still bone stock and running the original factory settings, After a year and a half of use, so far I have not even one complaint about its performance.
This guy is the best DJI Phantom explainer....PERIOD
Kirk Allen Thank you! More phantom videos coming soon!!
***** Thanks! Glad the video helped!
yes! Is the bast!!!!!
I should have watched your video first instead of searching all over for a simple, thorough explanation. Thanks for the upload! Great video!
+Vinnie Verite - Glad it helped!
+iftibashir it sure did! could you also do, or do you also have a video tutorial on how to use the GPS follow me mode and point of interest mode on the phantom 2 (vision+)?
Thank you. I have got into this pretty late. Just bought my first DJI Phantom 2 in 2022!!! Mint condition in the box. This has helped a lot.
Glad the video is still helping!
This is a very informative video. It explains everything you need to know about the settings in the Naza software
Thanks
Excellent Explanation! Thank you for taking the time and effort. Your video is by far the best one I have seen and I have been sorting through these videos for several days now.
I look forward the the Gimbal unboxing and review as well as how the entire setup works with the GoPro. Thanks for ensuring your videos of the highest quality and enjoyable to watch!
Just bought a gently used P-2 with Hero3+ and 3d gimbal. This series is invaluable for my startup. Looked through dozens of videos to find you. Thanks.
Larry Gibson - Hope you find the video series useful! Welcome aboard!
Very clear and logical organization! This is one of few videos that CLEARLY explains these modes.
Great video, really clear and helpful. According to the DJI Wiki, the Course Lock can also be locked during flight, by switching the S2 switch 3 to 5 times to record the current nose direction (and new home direction). When you do, the LED flash green rapidly. You can then fly along side a biker record the direction, and switch to CL. You can now maintain the direction while turning the quadcopter to point the camera to the biker. Don't forget you also have a new home location.
Very useful info - thanks!
I found a bit more, but have not tested this: if you switch 3-5 times between Off and Course lock you set the new course lock. If you switch 3-5 times between Course lock (middle position) and Home Lock (bottom position), you set a new home lock. I guess I was doing from Off to Home, setting both at the same time.
First let me say thank you for producing this video. I watched a lot of videos about how to get to Naza M mode, You are the only guy that said,( go to the DJI site and download the Assistant software). Also the only guy that said, ( if your toggles are left up then you will stay in the Phantom mode). I haven't installed Naza M mode on my Phantom Vision Plus because I didn't want to lose the Phantom mode. And I always thought , why didn't they leave it so you can toggle in and out of phantom mode. And nobody, I mean nobody else that produced this tutorial video said that that is what happens. So thank you , I have subscribed to your Channel and I'll check out your other videos
Thank you! Glad you found the video useful!
I have to thank you for the great video and for the clear and precise information. I had been putting off turning on the NAZA mode and testing the fail-safe system but after watching your video I felt confident enough to give it a go.
I really enjoy flying with the new features and I tested the fail-safe six times last night, brilliant.
great video mate, really explained a lot. One of the few videos that explains the different modes, how to turn it on and straight to the point. Cheers.
Wow, thanks for the video, now I know how to set it up, the instructions that come with it don't explain that much, again nice job teaching us.
Hey Guys, Absolutely the BEST explanation of IOC yet, why is this not on DJI's site? Good solid background on CL, HL, ATTI and FAILSAFE. Now I can go out and practice. Thanks again Great Job!!
Please do a video on Ground Station for the Phantom Vision 2+
I must say, you have the best videos out there for DJI. Many thanks for taking the time to make these. You are helping create a safer environment for those of us that care to take the time to learn. Subbed and liked
Brandon Wood Thank you!!I have my eye on a DJI Phantom 3 Pro, so more videos to come!
What an excellent video very clear excellent quality filming very informative well done.
concise, to the point, excellent work. agree with viral oza.
I watched many many videos about those mode and it was so hard to understand for me because im not a native english speakers and i don't speek english well. All those videos has bad sound quality or not sharpe or confusing talk or etc.
But now i found the best one. Very clean voice super sharpe video and usefull information i hope more videos comes soon for beginner. Thank you !!!
Mr GK Thank you - many more videos coming very soon!!! Next one in the series coming in a few days! Stay tuned!
Thank you,I'm waiting for next one!
Excellent video. Thanks
Great review of the advanced features. I was a little unsure about some of them but this helped me. I wonder if there is a video on manual mode???!!
Awesome video! Literally all the information I was looking for!
Great video, I was looking for this as I got my ph2 few days ago, they don't give to many instructions. Subscribed. 👍👍
Levis05 Yes, the instructions in the box are somewhat lacking!! More instructional videos coming shortly!!
nice job explaining what should have been in writting! after all its not bubble gum we bought here, this stuff needs comprehention b4 u take 1600.00 euros out for a flight...nice job
Agreed - I expected a nice thick manual explaining everything - but you get nothing!!! lol
Great video...well done and very helpful. Thank you!
Really clear video and very helpful. Thanks!
Thanks for the video, your explanation was very useful.
all this time I have had it now I see different things cool vid thanks
Awesome. Kudos to you.
great video. Now i understand. DJI should enploy you to explain for them.
Great video!
Thanks bro. Had a panic attack on an early flight when I completely lost orientation so this info is great. As you say, the documentation is a bit lame on such a great bit of kit.
A bit lame??? The documentation is pretty much non-existent!! lol.
Fly safe and have fun!
That was a very well put together video with good clear explanations. Thanks :)
Thank you for your comment - plenty more videos coming!!
Just browsing your past videos. Looking for a pole for my gopro for when I go on holiday. The Sandmarc looks good
John Shirley Ive also reviewed a pole by SPGadgets.
I currently have a GoPro 3-Way in my hands, which seems very versatile! Review coming soon!
Look forward to seeing that :)
I need to get one of these to use it with my GoPro Hero3+ Black Edition.
Plenty more videos coming - stay tuned!!
Very god video. You exsplain god and show how to do it. I drive Dji Phantom 2 vision+. But I understand that I moust go Into Naza mode and get manuell mode. Its god to have if somthing happen in Gps mode. I mean if satellitt fall out or somthing then Its a way to get controll over phantom agein. Very Nice video! Thanks.
Dude!, excellent video!. I don't know why i had to sift through several crappy videos before coming to yours!. That guy in the California videos (guy with accent in the field) somehow always seems to come higher than yours. DJI should link your video to tutorials!!. Thank you again.
Shawn Irani Thank you! Spread the word!! ;o)
Fantastic video, it's a shame DJI doesnt provide such useful & informative videos anymore. For the Phantom 1 they have plenty good videos, but for P2 it's all quite rubbish. This should be the "OFFICIAL" video. Also it's a pitty it doesnt show up immediately on UA-cam when you search for quality instructional video, I came here after reading your post on DJI Guys . com..
Excellent stuff. I am a beginner with any drone and this has convinced me to start on Naza-M ! :)
Glad you found it useful.
I am producing more videos at the moment - instructional guides on completing a full FPV setup etc - stay tuned!
Will Eagerly await the FPV set up video. As that is my next buy..
Nice job...not sure if you have one explaining the flashing light scheme in Naza vs. Phantom? Might clarify a few things...I know I get confused.
Great video! Very informative! What's the music? So catchy! ;)
Great video, thanks!
Hello! Amazing video! I have recently got a phantom 2 (might be a bit late to the trend😂) the DJI assistant app isn’t working, I have windows 11 and it doesn’t connect, stating to connect the controller, everything is on and I’ve tried different cables, thanks!
Thanks for posting this video. Great Help
i must say great pilot
finally a good explanation video - youtube is so full o sh*tty movies about phantoms by amatours
Great Explanation
soaljack Thank you - lots more DJI videos coming very soon - the next in the series will be released next week! Stay tuned!
thanks a lot! works great.
Thankyou for a great tutorial just one question i think the only mode i would probably use is the home lock.
once the phantom is in naza mode do i still have to enable it in the advance settings or is the home lock automatically enabled. thanks again regards
Great job!!! thanks.
that's a very helpful tips..is It still the same procedure to a new V3.0?
Your the best!!!!
Would you have any idea why the left switch doesn't go to Homelock in the PT2 app when you put it on HL on the controller, It stays at Course lock and doesn't move on.
Good info!
Hi the dji Web site no longer has a Naza app or updates for the Phantom 2 vision, where can I go to get it into naza mode.
Hello tech..I have a question: I just got my phantom 2 and when I use to turn it on, it would make a few sound and now it just make one sound when I turn it on...is my phantom going bad?
I got a new phone , And I can't find the original DJI Vision + app in the Play Store anymore. Is
there another app that I can use, but only one that you would recommend.
So Without naza mode enabled the switches on the left do nothing? I prefer home lock so can I leave the switches in home lock mode? Will that effect anything?
If you don't have the controller for the phantom2 how do you connect it to your phone
what happens if you didn't complete the trainig guide and enables naza m mode?
thank you for the great info.
Nice video
perfect
I did this and can't get my motors to start! I've recalibrated everything like three times each! Did get it to start once, but not repeatedly... what's wrong? I even went back into Phantom mode with no better success! Before switching to NAZA it started and flew perfectly.
maybe you need to contact DJI or connect it to the computer and reset it
did you finished the "training"?
good video, however the more 'fly aways' i read the more i hear they were in naza mode... gives a bit of fear.
Thats probably just co-incidence - most enable NAZA mode due to the extra features and functions it provides. For example, after a flight I can simply flick to Home Lock, and by holding the right stick back the craft will come back to you irrespective of the direction its facing. Very useful - especially if the Phantom is a long way away from you and you become dis-orientated.
Ive had many flights in NAZA mode and all have been spot on. The main reason for flyways is those who do not wait long enough for good GPS lock, and interference from other radio equipment.
ok you have persuaded me, i am clicking this button today!
Hi Ifti. what did you change? Wasn't IOC enabled by default? I am using the Naza-M V2 on a home build, and don't know how the Phantom is set up, but I can see that your transmitter is aware of the Home Lock and Course Lock modes. Are they not enabled by default on the Phantom?
No they are not enabled by default. By default those switches didn't do anything.
You need to connect the Phantom to the DJI assistant and press the 'Phantom' button in the top corner, as shown in the video, to set it to NAZA mode - then enable IOC controls.
Very awesome video the best one I came across by far but I'm still not clear on how to download the driver and every thing else I need to do to be able to do this. I've watched videos and they are saying things like unzip this and zip that and I haven't the slightest clue on what any of this means and I'm not sure what to do when I come to zip or exe can some one please help me out with this cause computer terms and big words like zip are not in my vocabulary 😐
bebadd I'll try create a video guide ;o)
iftibashir thank you
My advice to you is to leave your Phantom the way it came from factory and keep enjoying it to the maximum. If you have no clue of what to do or how to do it, you might not want to mess with the aircraft software. What is the purpose of changing something that is working good to explore the unknown! Most fly aways happens after people start messing with stuff that they don't even understand. Stay away from that. What is the benefit of messing with those settings? My Phantom 2 not vision still bone stock and running the original factory settings, After a year and a half of use, so far I have not even one complaint about its performance.
Queria um vídeo em português,. I need a vídeo in portuguese.. me ajuda aeee. Help
6 like