I haven't purchased a new 1/4"Hex driver yet. I worked a14hr day Friday to avoid Saturday work. It was worth it, but brought something to my attention that I hadn't considered much. The weight of the tool-combo. It's especially important when you're operating on the ol-reserve tank.
Good video! Your explanation of speed #1 and the 1 second delay was exactly what I was looking for! I was about ready to send my 845 back because I wasn’t giving it enough time to kick into impact mode. Thanks Demonstrating the self tapping screws into sheet metal is a big plus for your video! Bravo 👏
The 850 is a XR in the UK, i just got Kit DCK2050M2 at Home Depot in the AZ. It came with, 2 / 4AH batteries branded XR. With DCF 850, Hammer drill DCD805 XR branded.
Typically, when I'm disassembling/reassembling a vehicle, I'll have 1/4"Hex driver, 3/8" impact driver, and 1/2" impact driver, maybe both the 1/4"air rachet and 3/8"air rachet. All for different little tasks that make up the whole job. It makes it faster and easier. I really appreciate the tests you did on this video. I like DeWalt tools, but don't own any of them yet. Your tests did were adequate to display the tools proper usage. To many DIY'rs are getting the idea that if they purchase a powerful enough 1/4"Hex driver, they won't need a 3/8"impact or 1/2" impact driver. Perhaps the world as a whole would be a safer place if those people don't have 3/8"and 1/2" impact drivers, but that isn't the point I guess I'm trying to make. I bring out the whole arsenal for all of different tasks that make up the whole job. Keep up with great disclaimers before your videos. This channel is in my top5 of toolporn. Thanks for the entertainment.
I've owned the older brushed impact driver that thing lasted over 9 years. I got the original atomic great tool. But the dcf850 is my favorite small size and power.
I think people lost the idea of an Impact driver… Im reading some reviews and please explain why all people care about is more power. This 845 is a smart tool to accomplish task without stripping screws and to avoid over torque… to me thats a winner deal… please you guys tell me who in the world would buy an Impact driver to losen lug nuts, for that you get an Impact wrench. So please don’t hate specially when you, thats reading this comment… you are probably a weekend warrior who has a bunch of tools collecting dust and don’t even understand what an Impact driver is for.
Yup. Would be nice to have a spiritual successor to the hitachi pulse driver for sensitivity & power, with a bosch freak style collet and detachable chucks. With a short body you could combine the needs of installation drivers, right angle ratchets, impact drivers & wrenches. Add a metabo style torque multiplier attachment for added low speed high torque for good measure!
I agree. Impact drivers are just a scaled down impact wrench, meant to drive screws and small lags without the torque reaction from a drill/driver. Now people are expecting them to do more than what a 1/4" hex is suited for.
I was goin to suggest beside the testing of max busting torque and lossing from impact drivers or wrenches I might be asking too much 😂 but it would be much appreciated if you could add on your next videos the torque on inch/ft pounds and test how accurate are does numbers corresponding to the spec on modes 1-4 ( lowest to highest not only max ) to know how great of precision are tools and of course for some requirement of jobs when screws or bolts have to be at a certain torque , as I been looking some Milwaukee and other brands on older models didn’t said ft pounds on levels or modes 1-3 only max so we have no idea until we have a precision instrument torque wrench . Hope you understand my suggestion I know on some video you did but it would be nice to add this on the future . Like how you explain your videos w weight and size and depth great Job !!!
I use a DCF850 mainly these days after upgrading from the 887. The size and RPM are really attractive to me since I would be using this to fasten 3-4" deck screws all day for the most part. I'm not too concerned with the max power output since I own the atomic 923 and 921 for nuts, bolts, and lag bolts. Always need to have the right tool for the job. I use them with powerstacks Overall I'd chose a smaller impact driver over a powerhouse any day. I own flex and m18 tools but to me their drivers are too big and bulky especially when you use em with bigger batteries.
As always well done review, you would think the 845 with it's increase in ipm and rpm would put much farther ahead of it's two other siblings the dcf 840 and dcf 850 ( I own both) the 840 is fast and powerful, the 850 is also fast and powerful and more compact with precision control (speed 1) and speed 2,3 for driving fasteners. The 845 is the 840 (with speed controls) if you own the 840 or the 850 you WON'T be missing much if you don't get the 845, unless you have money 💰💰 burning a hole in your pocket and want to buy a new toy😊.
Hi Tim, that dcf845 is bad ass, for me, my 850 is just as powerful and more compact than that 845, my 850 gets in very small tight spaces and gets the job done faster than my hand tools,
I have the DCF850 and love it. I actually have a couple because they’re so good. I’m failing to see why dewalt released this. Seems decent, but nothing really ground breaking
To be honest i have owned all the dewalt impacts since 2013. At work I've used miluakee, makita, metabo. To be honest they all work well in real world situations. Eveything else is advertising. The 845 is a real nice impact. However not much of a diffrence from the older model. If you want an impact that's actually made better with better parts on the inside look up the makita made in Japan model. I believe it's purple in color. That tool is 300 dollar's alone. Do you need it? Probably not however if you appreciate mechanical quality it's a hell of a tool
I got my 845 about 3 weeks ago.and I used it for 1 day and was Highly Disappointed with it and went right back.to my Atomic 850 ..... I don't get it , DeWalt makes the Most Powerful Impact Wrenches on the Market but when it comes to.Impact Drivers then are Lagging Waay Behind and I don't understand why ??? Common DeWalt ????
Because the collets on impact drivers are only rated for 1800inlbs if you go over that you risk breaking them, that's why Makita, Dewalt and Bosch stay around the 1800 mark Milwaukee, Flex, Metabo and Ridgid go over 2000inlbs and they are always having problems with their collets
@Brian F Forgot the H and dewalts not lagging behind anyone in impacts, I see a lot of people in the trades carpentry, electricians said plumbers still using old dewalts nicad batteries more than I see the newer stuff you watch UA-cam and you would swear everyone is using new tools most of these UA-cam guys don't work in construction they found a way to make money and free tools
This is not the right tool for auto mechanics. You want an impact wrench for that. The atomic dcf921 and 923 having over twice the torque this impact wrench has.
Great powertools, are same thing as the great brands of powertools , by low prices, same quality 's, same powerful, same driving of speeds ...low cost, multi tools, battery's on....
Oohh woooow, another ho humm impact driver from DeWalt, woop ta doey. DeWalt is sooooo over rated. Great review though. Love the over views then testing. Great job!
Their impacts drivers are trash. But their new impact wrenches and ratchets make your Milwaukee tools look like fisher price toys. Same with saws and etc.
![MORE POWER - Big Batteries - DeWalt 20V Atomic Impact Driver Review [DCF809]](http://i.ytimg.com/vi/aivtjP9nogc/mqdefault.jpg)
I haven't purchased a new 1/4"Hex driver yet. I worked a14hr day Friday to avoid Saturday work. It was worth it, but brought something to my attention that I hadn't considered much. The weight of the tool-combo. It's especially important when you're operating on the ol-reserve tank.
Good video! Your explanation of speed #1 and the 1 second delay was exactly what I was looking for! I was about ready to send my 845 back because I wasn’t giving it enough time to kick into impact mode. Thanks
Demonstrating the self tapping screws into sheet metal is a big plus for your video! Bravo 👏
The 850 is a XR in the UK, i just got Kit DCK2050M2 at Home Depot in the AZ. It came with, 2 / 4AH batteries branded XR. With DCF 850, Hammer drill DCD805 XR branded.
Typically, when I'm disassembling/reassembling a vehicle, I'll have 1/4"Hex driver, 3/8" impact driver, and 1/2" impact driver, maybe both the 1/4"air rachet and 3/8"air rachet. All for different little tasks that make up the whole job. It makes it faster and easier.
I really appreciate the tests you did on this video. I like DeWalt tools, but don't own any of them yet. Your tests did were adequate to display the tools proper usage. To many DIY'rs are getting the idea that if they purchase a powerful enough 1/4"Hex driver, they won't need a 3/8"impact or 1/2" impact driver. Perhaps the world as a whole would be a safer place if those people don't have 3/8"and 1/2" impact drivers, but that isn't the point I guess I'm trying to make. I bring out the whole arsenal for all of different tasks that make up the whole job. Keep up with great disclaimers before your videos. This channel is in my top5 of toolporn.
Thanks for the entertainment.
1/2 impact driver? Where do they sell this? I've never heard of that tool
I've owned the older brushed impact driver that thing lasted over 9 years. I got the original atomic great tool. But the dcf850 is my favorite small size and power.
I think people lost the idea of an Impact driver… Im reading some reviews and please explain why all people care about is more power. This 845 is a smart tool to accomplish task without stripping screws and to avoid over torque… to me thats a winner deal… please you guys tell me who in the world would buy an Impact driver to losen lug nuts, for that you get an Impact wrench. So please don’t hate specially when you, thats reading this comment… you are probably a weekend warrior who has a bunch of tools collecting dust and don’t even understand what an Impact driver is for.
Yup. Would be nice to have a spiritual successor to the hitachi pulse driver for sensitivity & power, with a bosch freak style collet and detachable chucks. With a short body you could combine the needs of installation drivers, right angle ratchets, impact drivers & wrenches. Add a metabo style torque multiplier attachment for added low speed high torque for good measure!
I agree. Impact drivers are just a scaled down impact wrench, meant to drive screws and small lags without the torque reaction from a drill/driver.
Now people are expecting them to do more than what a 1/4" hex is suited for.
Oh Kenny
I have this impact driver and i use it on lugnuts lol. But its only a few times a year. Wouldn't do that daily
I was goin to suggest beside the testing of max busting torque and lossing from impact drivers or wrenches I might be asking too much 😂 but it would be much appreciated if you could add on your next videos the torque on inch/ft pounds and test how accurate are does numbers corresponding to the spec on modes 1-4 ( lowest to highest not only max ) to know how great of precision are tools and of course for some requirement of jobs when screws or bolts have to be at a certain torque , as I been looking some Milwaukee and other brands on older models didn’t said ft pounds on levels or modes 1-3 only max so we have no idea until we have a precision instrument torque wrench . Hope you understand my suggestion I know on some video you did but it would be nice to add this on the future . Like how you explain your videos w weight and size and depth great Job !!!
I use a DCF850 mainly these days after upgrading from the 887. The size and RPM are really attractive to me since I would be using this to fasten 3-4" deck screws all day for the most part. I'm not too concerned with the max power output since I own the atomic 923 and 921 for nuts, bolts, and lag bolts. Always need to have the right tool for the job. I use them with powerstacks
Overall I'd chose a smaller impact driver over a powerhouse any day.
I own flex and m18 tools but to me their drivers are too big and bulky especially when you use em with bigger batteries.
Great video, man. Very informative, easy to watch and follow.
As always well done review, you would think the 845 with it's increase in ipm and rpm would put much farther ahead of it's two other siblings the dcf 840 and dcf 850 ( I own both) the 840 is fast and powerful, the 850 is also fast and powerful and more compact with precision control (speed 1) and speed 2,3 for driving fasteners. The 845 is the 840 (with speed controls) if you own the 840 or the 850 you WON'T be missing much if you don't get the 845, unless you have money 💰💰 burning a hole in your pocket and want to buy a new toy😊.
Never knew speed 1 was for taping screws, seems like a great impact. Nice review 👌💯
Hi Tim, that dcf845 is bad ass, for me, my 850 is just as powerful and more compact than that 845, my 850 gets in very small tight spaces and gets the job done faster than my hand tools,
I have the DCF850 and love it. I actually have a couple because they’re so good. I’m failing to see why dewalt released this. Seems decent, but nothing really ground breaking
The 850 is a Home Depot exclusive. The 845 is the Lowe's equivalent.
To be honest i have owned all the dewalt impacts since 2013.
At work I've used miluakee, makita, metabo. To be honest they all work well in real world situations. Eveything else is advertising. The 845 is a real nice impact. However not much of a diffrence from the older model. If you want an impact that's actually made better with better parts on the inside look up the makita made in Japan model. I believe it's purple in color. That tool is 300 dollar's alone. Do you need it? Probably not however if you appreciate mechanical quality it's a hell of a tool
It would be nice if DeWalt would make the protective boot available in the U.S. I had to get a protective boot for my DCF900 from Italy.
At 9:08 you said you were using a 1/2" socket. If that's the case, those were probably 5/16" lag screws.
Are there any specs on the different torque at different speed settings?
is this out in the UK, cant see it anywhere?
On torque test channel the Dewalt 850 Atomic had way more torque than the
Dewalt 845
Good Chit! Sticking with my Hercules! Hate mail accepted in the comment section.😅
😂😂😂 But realistically... if you are just starting out in mechanics.. you can't beat the prices and warranty!
lol people love telling other people what to buy idk why they care
Love my HERCULES 2200 inch pounds it kicks AZZ
Someone know's when dcf845 will be available in europe?
good driver.
I believe I would of tried the DCF 840.
Pretty sure speeds are posted on the sticker that is on the side of the impact
I guess I'll go with the 850 since it's smaller...
Compact did a good job
Can you please try it 5ah power stack battery
I got my 845 about 3 weeks ago.and I used it for 1 day and was Highly Disappointed with it and went right back.to my Atomic 850 ..... I don't get it , DeWalt makes the Most Powerful Impact Wrenches on the Market but when it comes to.Impact Drivers then are Lagging Waay Behind and I don't understand why ??? Common DeWalt ????
Because the collets on impact drivers are only rated for 1800inlbs if you go over that you risk breaking them, that's why Makita, Dewalt and Bosch stay around the 1800 mark Milwaukee, Flex, Metabo and Ridgid go over 2000inlbs and they are always having problems with their collets
@Lou Cifer All the Technology we have they can't build a stronger collet ???
@Brian F Haven't discovered adamantium yet, but that is why they made impact wrenches I use impact driver for screws ,lags I use impact wrench capice
@Lou Cifer You mean " Capiche " 😂😅🤣 , and if I know I'll be putting in some Lags I. l use my Impact Wrench ....
@Brian F Forgot the H and dewalts not lagging behind anyone in impacts, I see a lot of people in the trades carpentry, electricians said plumbers still using old dewalts nicad batteries more than I see the newer stuff you watch UA-cam and you would swear everyone is using new tools most of these UA-cam guys don't work in construction they found a way to make money and free tools
i am a sutomotive mechanic i cannot figure out where you need over 3,000rpm taking out bolts and screws don't need it
This is not the right tool for auto mechanics.
You want an impact wrench for that. The atomic dcf921 and 923 having over twice the torque this impact wrench has.
im gettin it and the 850
LET'S GO TJ 🏁
I think we have reached the max for impact drivers. At this point they are all just about the same.
I find these bolt removal tests pointless for a impact driver, but still entertaining
I bought the DCF845 AND ONE DAY OUT OF NOWHERE THE SPEED BUTTON FAILED
Great tools
Why not use a 5ah powerstack? Nobody is doing that
Has anyone had that happen to them?
Great powertools, are same thing as the great brands of powertools , by low prices, same quality 's, same powerful, same driving of speeds ...low cost, multi tools, battery's on....
We need more rpm why?
Why DeWalt? This is literally worse than the atomic. Why would anyone buy this instead of the 850? Or the previous model.
Nice!
Waiting for driving screw 's.drilling holes, not talking
The new dewalt tools have serious sex appeal
ya if youre gay
I think your shirt is a wash
That ugly 3 way switch kills Dewalt impacts for me.
Probably more robust than the alternatives though
I like it, you can change speeds without looking for the button and confirming you have the setting needed for the task.
Easy to switch modes with gloves an more durable than the push button mode tools.
Oohh woooow, another ho humm impact driver from DeWalt, woop ta doey. DeWalt is sooooo over rated. Great review though. Love the over views then testing. Great job!
Their impacts drivers are trash. But their new impact wrenches and ratchets make your Milwaukee tools look like fisher price toys. Same with saws and etc.
@@juanc5149 ooooh, ok.....🤣😂😁😅😂🤣🥹. Keep em coming man, your funny.