Це відео не доступне.
Перепрошуємо.
TOURING 200 SERIES | Accessory and Modification Run down | 2014 Toyota Landcruiser 200 series Sahara
Вставка
- Опубліковано 16 сер 2024
- The Toyota Landcruiser 200 Series is a capable vehicle from factory, but I’ve modified and accessorised mine to make it more capable and better suited to travelling Australia with my family.
In this huge episode I cover all of the modifications and accessories that I’ve completed on my LC200 and how I’ve set my vehicle up for full time travel as we prepare to head around Australia.
As mentioned in this video I’ve used a lot of products from a variety of suppliers and covered many of the topics mentioned today in much more detail in previous episodes. I’ll be sure to link products and video’s below.
I hope that this video has given you some ideas about what is possible when it comes to setting up your touring vehicle, whether it be a LC200 or not.
00:00 - Introduction
01:39 - The Vehicle
02:31 - Exterior
06:20 - Roof Rack
08:18 - Suspension
10:21 - Wheels & Tyres
11:42 - Performance
14:34 - Electrical
19:17 - Lighting
21:40 - Interior
24:45 - Rear Storage
28:23 - Conclusion
In depth topic videos -
KDSS - • Toyota KDSS EXPLAINED ...
Multi-terrain Select - • Landcruiser 200 | EVER...
Roof Rack - • SHELTER | SOLAR | STOR...
Weights - • The LC200 is WEIGHED |...
Performance Tune - • POWER UPGRADES | Remap...
iTechWorld 1420CA Pro - • LITHIUM CRANKING BATTE...
iTechWorld 120X - • UNDER BONNET LITHIUM |...
Ultragauge - • LANDCRUISER 200 | Ultr...
EGT Gauge - • EXHAUST GAS TEMPERATUR...
Custom Fridge Surround - • ULTIMATE OVERLAND STOR...
Emuwing Review - • EmuWing Installed on a...
Emuwing Storage Box Build - • CUSTOM STORAGE SOLUTIO...
12V Water Pump Box - • ENDLESS WATER | OFF-GR...
Kaymar Wheel Carrier / Long Range Tank - • OVERLAND LANDCRUISER 2...
Tailgate Storage - • BEST VALUE for MONEY O...
Bluetti PV200 - • BLUETTI PV200 | Most E...
Unifilter Air Box Element - • LC200 | DUSTING Pt. 2 ...
Manta Exhaust - • MANTA EXHAUST REVIEW |...
Torque Convertor Lock up - • TORQUE CONVERTOR LOCKU...
Products Used in the XO LC200 build -
EXTERIOR -
Number Plate Hinge - ebay.us/Z49M1p
Carbon 12000lbs Winch - ebay.us/WsvBwE
ARB Recovery Points - ebay.us/Giv61v
Crashpad Wheel Bag - crashpadgear.c...
ROOF RACK -
Rhino Rack Pioneer Platform - ebay.us/t9iVc5
Kaon Awning Bracket - ebay.us/FgJVLO
Caso Roof Box - caosgear.com.a...
Renegy 100W Solar Panel - ebay.us/dcvazh
Maxtrax Pins - ebay.us/NKXrxQ
Kaon Maxtrax Brackets - ebay.us/Q7Rmvi
SUSPENSION -
Digital Inflation Kit - ebay.us/AHEzb0
Blackhawk Upper Control Arms (UCA) - ebay.us/O6Ud6K
Roadsafe Front Differential Drop - ebay.us/CBIc17
Roadsafe Adjustable Rear Pan Hard Rod - ebay.us/XJGmBq
PERFORMANCE -
Safari Snorkel - ebay.us/mJ75lD
Donaldson Cyclonic Pre-filter - ebay.us/x7socf
Unifilter Element - ebay.us/bhPQal
Manta Exhaust - ebay.us/rqJp9y
ELECTRICAL -
iTechWorld 1420CA PRO - ebay.us/LO50xC
iTechWorld 120X - ebay.us/qNrHyW
Redarc BCDC1240D - ebay.us/ZDdt2E
Bluetti PV200 Solar - www.bluettipow...
Victron BMW712 - ebay.us/JyaP2m
1000W Projecta Inverter - ebay.us/VpSwMy
ARB Twin Air Compressor - ebay.us/GuohE0
Topargee Water Gauge - ebay.us/G0kGfj
LED Lenser P7R Torch - ebay.us/MlbzdZ
GME XRS UHF 370 - ebay.us/RlFRfn
GME XRS UHF 390 - ebay.us/ml9Fns
GME 2.1dB Antenna - ebay.us/lq4HZj
GME 6.6dB Antenna - ebay.us/yRvDmw
Blackvue 750X Dash Camera - ebay.us/fcWf5Q
LIGHTING -
Stedi High Beam LED kit - ebay.us/2cObw1
Stedi Type X Pro - ebay.us/Pph1Ma
Stedi 26” Light bar - ebay.us/DV0kQ8
Stedi Rock Lights - ebay.us/jYQGiK
INTERIOR -
Switch Panel - ebay.us/A7PnVf
Ultragauge MX1.4 - ebay.us/W6sujD
Oricom TPMS10 - ebay.us/8Tawny
Garmin Overlander - ebay.us/g1XOp8
EGT Gauges - ebay.us/RRnq3z
Kap Fire Extinguisher Bracket - ebay.us/Rclu0V
WeatherTech Floor Mat - ebay.us/5zgaNt
REAR STORAGE -
Custom Installation Drawers - custom-install...
Anchor Track - ebay.us/oRqpm3
Front Runner Pro Box - ebay.us/VqC3hB
Kincrome Foam - ebay.us/bCjM3f
Emuwing Gull wing - www.emuwing.co...
18:45 I think you mean the 6.5 dB aerial is better on flat terrain for long distance. The shorter 2.1dB will be fine around town or on very hilly terrain where the vehicle is on a significant angle.
For those looking at 200 series rack. The arb is the full 200kgs less rack weight of 28kgs from memory. Even off road. It's also much lower to the roof and much quiter
Un grand merci pour le partage de cette super vidéo !
Absolutely fantastic and well thought set up!
I loved it the way how you've left the car almost looking original but at the same time packed with technology that suits your needs..I think your build is one the most clean and functional set up that Australia has ever seen ..
Thanks mate, appreciate that. I love the way this cruiser is setup now. Suits my needs just perfectly, albeit a few things here and there to tweak. If budget wasn't an issue a differential re-gear would be a great mod to bring back the factory gearing.
Cheers
Nathan, it blows me away seeing how much work you have done to the Cruiser. Great vid and I’m really looking forward to seeing the van in more detail and how you set it up for the trip. When are you all hoping to start ? Thanks for sharing
Thanks Jim, hopefully we'll be able to catch up on the road soon and you can check it out in person.
The van has been picked up and we are looking at hitting the road this week 👍
Wow, what an awesome setup. I'm soon to get myself an early LC200 and you've given me some great ideas.
I'll definitely be coming back to this video for reference 👍
Awesome mate, glad this could help! God luck with your build 👍
i appreciate the honesty of admitting when something has not been a good investment / choice. I often take one of your ideas and borrow (plagiarise) for my own setup - thank you!
Cheers mate, no everything is perfect and I'd rather save some else the money if something doesn't work well or fit the design brief. I'm glad I could give you some ideas! Cheers.
the best mod setup I've seen on a 200 series
Thanks mate, it's taken some time, but I love it now!
Omg. Setup ++
Tried and tested. Everything with a purpose, really honest selection of gear. The micro lights from stedi are brilliant. Use them on my arb rack for camp setups.
Cheers mate, very happy with the overall result now!
Most things are working just perfectly and everything serves a purpose
Great episode summing everything up,
You might think about having another spare tyre without the rim just to keep the weight down seeing it’s a difficult size to source in some of the more remote areas
Yes, this has been a consideration and would potentially be used for certain trips 👍
SPORTING THE NED KELLY LOOK!
Hahaha 🤣 Its getting there!
I feel like someone is getting a Donaldson PowerCore airbox.
i have lots of envy :) well presented Nathan plenty of ideas thank you . I HAD TO EDIT THIS COMMENT THAT IS AN IMPRESSIVE SET OF LINKS IN THE DESCRIPTION :)
Thanks Tom. This vehicle is setup exactly how I like it now. Lots of trial and error and a fair bit of wasted money, but I got there in the end.
Hopefully that description list can help others out 🤞
Fantastic set up, and as you said its for your needs, Great video,
Thanks mate, it is and has worked very well! 👍
Great run down Nathan, a lot of thought into setting up and making it right for your situation. Looking forward to seeing the van, cheers 🍻
Cheers mate, looking forward to releasing the van details! Helpfully in a few weeks with everything going to plan 🤞
What an awesome vehicle Nathan. Thanks for another excellent episode! 🥇
Cheers, thank you 🙏
Sweet ride brother, wishing you safe and reliable travels
Thanks mate 🙏
Love the truck and your vids have definitely helped our set up.
FYI: the 2.1 is better for hilly terrain as lower dbi has a higher angle throw and the longer 6dbi is for long flat areas!
👌
Cheers mate 👍
Nath,
Nice comprehensive video again.
Looks like you are ready to go, just need to fill up the tanks and fridges… 😂
BUT…it also reminds me that I miss all above the car.. roof rack and accessories…😢😢😢
Yep, I know.. keep the shops happy selling.
How is the new van doing??? All just waiting your next vid.
Cheers
Thanks Holger!
Now with my new Turbos installed I'm finally ready to go. The van will be released in the coming weeks. Absolutely loving the new van and all the features.
Great video. How did you end up resolving the parasitic amp draw from redarc bcdc and lithium starting battery?
Hey mate, so the lithium starter issue was resolved with a relay switching the BCDC charger off with the ignition. The parasitic draw was determined to be a couple of accessories that has since been rewired to the auxiliary including the dash cams, winch control box and Ultragauge. Much better now 👍
Keen to hear what your planned itinerary is with the van as well as what van
Very soon to releasing details on the van mate 👍 Filming has started and hopefully within the next few weeks I'll have some content out! 🤞
Great setup ever thought of a cargo barrier when on the road
I have, but I do find them a little limiting in the rear of the vehicle. I generally try to tie my gear down and find items they won't fit between the roof and the rear seats.
Great video
Thanks Nathan
Thanks, appreciate it 👍
Good video Nathan, love to know what the weights are now with full tanks and all people.
Yes, not sure I would 😆
Hopefully something I'll be able to do when the van is setup and ready to go 👍
Nice run down mate, lots of similar stuff to ours. Cheers Steve
Cheers Steve, love this setup now! 👍
Also a video idea contact the cruiser company they have a 1000 times more refined rear side opening window. No kitchen cupboard hinges that's so sure.
I checked them out and they look great, something I would definitely consider if I had my time again 👍
Love your episodes, Nathan. As an LC200 owner, you have helped me a lot, giving us some great ideas. I think the rear tailgate light gets me the most comments. I'm currently looking at an undebonnet fuse box. I can;t see a link above. Could you prpvode some info, includign how you mounted it?
Thanks Nick, glad to hear that I've managed to provide some useful ideas over the years.
In relation to the fuse block, this was created and mounted by Ultimate 4WD Equipment in WA, however after some longer term testing, probably isn't something that I woulds recommend now after experiencing a few little issues here and there. Its simply mounted on top of some other existing equipment 👍
Hey mate, Do you have a link to that rear tailgate internal light? that thing is amazing!!!
Great set up and very well presented in the video. Very keen to know roughly how much extra weight have the mods added to your vehicle? I want to make a guess of 450-500 kg excluding the weight of water and additional diesel but looking forward hearing from you about it :) Enjoy your big lap!
Yeah for sure, a very popular topic. I have made a video with the cruiser not too long ago. Granted, not all modifications were installed, but the vast majority were. ua-cam.com/video/RKqo4yXc8pY/v-deo.html
I haven't done another proper weigh since then, with the vehicle by itself.
Cheers.
Thanks!
Thank you so much Tom 🙏
Out of interest does the gvm documentation include the wider off set rims? In SA no ARB reseller will allow it...
Hey there, great video. Im quite new to landcruisers, but what are the different specs and options for diesel? Looking for luxury things like subroof and cool box etc. I heard sahara is one of the top specs? Or are there more versions?
Hey mate here in Australia the 200 series from lowest to highest spec go: GX, GXL, VX and Sahara 👍
Wouldn't the Ultraguage, mounted in that position, become a missile in the event that the curtain airbag deploys..?
There is a chance, but without testing that couldn't comment. I guess this would be any different to mounting a phone there from the windscreen...
Hi Nathan, great Vid with your swing away spare wheel carrier how did you overcome the rear sensors in the bumper would the sensors pick up the carrier
Cheers
MG
Thanks mate, so in my case I just disabled the whole lot. I personally found them annoying, particularly if towing anyway, so I've got used to not having them at all. The hardware is still there, just disabled by switching them off 👍
@@XploringOz thank you
Hi Nathan, can you pls tell me a bit more about the rear adjustable pan hard rod to correct alignment? I've got a 2019 Sahara with BP51s, GCM, diff drop Blackhawk UCAs but no mods to pan hard rod. HAve never been happy with the back end wobble since suspension work down - will the PH rod fix this? Thanks.
Hey mate,
So as you lift up the cruiser the rear axle will start to shift slightly to the drivers side. This is quite obvious when you have offset tyres like I do. The rear pan hard rod will allow to adjustment to bring that axle back into perfect centre again.
If you're having troubles after your suspension install then this is something I would definitely try. It's not too expensive either, just need to find shop to do it and get a wheel alignment done after instal 👍
Hi Nathan, my rear storage system is, like yours fantastic, but just like you, the space between my storage system and rear side windows is good storage that is difficult to take advantage of.
In my case, GU Y61 Patrol, Emu Gull Wing window not available for the rear passenger side as rear air con is ducted behind original glass, also both rear side windows contain FM radio antennas, so in theory I'm not able to utilise gull wings, in any case the hinge mechanism of the Emu gull wings would be impeded by internal roof storage.
Should any of your dedicated followers have a manufacturer of gull wings windows for the GU passenger side, I'd appreciate input.
Mate, you are so set up, and I'm annoyed with myself as I'm about to mount EGT/Boost gauge and totally forgot your detailed install of your gauges, as I'm really not a fan of pillar pod housing, illuminated gauges at night would impede my night vision, especially to verging traffic on my right.
I'm attempting to find a suitable location to mount the Redarc G52-BET gauge I've sourced.
By the way, my Itech 1420 pro is working a treat isolated by my old Redarc SBI12 converted into a basic ignition activated relay.
Love your work mate.
Hey mate, I'm sure happy with my setup now. Its just as I want it 👍
Glad to hear you are having a positive experience with the 1420 PRO and the isolator.
Yes, the EGT gauges are an annoying display and I was just the same, trying to avoid the 52mm pillar gauges.
do you know anything about LC200 hill start assist mine seems to not be working?? any tips??
Sorry mate, not sure what would be going on there... 🤔
Not knowing about the Ultra Gauges it is a MX1.4 when it’s in 5th gear it shows 85 and when it’s n 6th gear it shows 86 is that common
Please help I'm asking for my dad
G'day Lesley, which figure is the 85/86 relating to? Is that a temperature measurement, or positioning figure?
With the dash cameras.... are both actually able to capture number plates clearly? I have seen to many that are blury and points for insurance as our still at fault and need to pay excess without number plates.
Yeah, these one's can't at 100km/h but can easily at slower speeds around town.
Still no van
The van has been picked up! Hopefully I can get a video out in the coming weeks! 🤞