Beautiful pendants, and beautiful technique! Thank you! 😊💕👍 Tip: The longer the initial cure time, the more buckled the surface gets with UV resin, because that type of resin gets super hot very quickly, and doesn't have time to even itself out before curing. I have found that to achieve a smooth surface with UV resin (regardless of brand, but I use only JDiction), I have to do 2 or 3 *very* short curings (no more than 10-30 seconds at a time!), cooling the resin completely before hitting it with the lights again, depending on the depth of resin. A shallow (doming or leveling) pour can buckle very fast, so 10-second cures seem to work best. ~~~After about a minute or two of curing, if it's still sticky, place the item in a clear glass if water and hit it with another couple minutes of UV light. The reason UV resin can remain sticky is because not enough oxygen deprivation occurs, so the "water bath" does the trick. Just wipe dry with a soft cloth, no alcohol needed.
Thanks for the tips! I have done some 2" oval pieces, which are a bit large for UV resin, but I like to experiment. 1st layer usually goes fine. 2nd layer, I sometimes get a concave effect, so curing less time may solve that. I use a piece of clear plastic (overhead projector kind), then glue on a paint skin, then resin.
I am just getting into resin so I watch LOADS of videos and these pendants are by far the most beautiful I've seen. I'm so, so in love with them! Subscribed so I can check out what else you've done.
I use eye shadow some times I heard u can use food colouring gitter but not overload because it wil stick out in th resin and u will have to sand it sometimes a little is good depending what y0u making I made keyring and threw some glitter I with my fingers and it looked great😅
Just love this! I painted rocks with the northern lights and did trees, so can’t wait to try this in resin. You are a great teacher! JDiction high velocity UV resin has changed the quality of my work, it is all I use for finishing.
Wow , these are stunning ! Resin scares me . Ive tried some before and it never hardened properly. It also scares me because of the health precautions you need to take while working with it .
Hmmm. I didn’t. I was making a whole bunch all at once so maybe the one I put the hardware through wasn’t the exact one I was showing earlier but otherwise not sure why you think it’s all together different? 🤷🏻♀️ I rarely make these so did a bunch at once for this tutorial and that’s it. Anyway - the whole point is to show others how so…
@@bouncingoffthewallsresinart oh ok that makes sense, i just wondered if somehow that one you were working on didn't work out or something. thank you, they are so gorgeous!
Beautiful pendants, and beautiful technique! Thank you! 😊💕👍
Tip: The longer the initial cure time, the more buckled the surface gets with UV resin, because that type of resin gets super hot very quickly, and doesn't have time to even itself out before curing. I have found that to achieve a smooth surface with UV resin (regardless of brand, but I use only JDiction), I have to do 2 or 3 *very* short curings (no more than 10-30 seconds at a time!), cooling the resin completely before hitting it with the lights again, depending on the depth of resin. A shallow (doming or leveling) pour can buckle very fast, so 10-second cures seem to work best.
~~~After about a minute or two of curing, if it's still sticky, place the item in a clear glass if water and hit it with another couple minutes of UV light. The reason UV resin can remain sticky is because not enough oxygen deprivation occurs, so the "water bath" does the trick. Just wipe dry with a soft cloth, no alcohol needed.
Thanks for the tips! I have done some 2" oval pieces, which are a bit large for UV resin, but I like to experiment. 1st layer usually goes fine. 2nd layer, I sometimes get a concave effect, so curing less time may solve that. I use a piece of clear plastic (overhead projector kind), then glue on a paint skin, then resin.
Awesome!!!! Being Native American I will add a indigenous flare to this. Thank you so much for this beautiful tutorial!! ❤❤❤
Ooh I love that idea! Would love to see what you create!
You are a witch 🧙♀️ ❤❤
I am just getting into resin so I watch LOADS of videos and these pendants are by far the most beautiful I've seen. I'm so, so in love with them! Subscribed so I can check out what else you've done.
What an amazing compliment, thank you!
So pretty. Thank you for sharing this technique!
Awesome! Love the effect with the glow powder. Thanks for the info - very well done video.
Thanks for watching!
Love this tutorial! So well done, nice editing and you didn’t leave out anything. I can’t wait to make this!
Thanks so much! 😊Hope you do try it!
I use eye shadow some times I heard u can use food colouring gitter but not overload because it wil stick out in th resin and u will have to sand it sometimes a little is good depending what y0u making I made keyring and threw some glitter I with my fingers and it looked great😅
Thank you!
Just love this! I painted rocks with the northern lights and did trees, so can’t wait to try this in resin. You are a great teacher! JDiction high velocity UV resin has changed the quality of my work, it is all I use for finishing.
These are stunning!! Thank you for sharing your technique.
Thank you. You are so welcome!
Just gorgeous! Thank you for sharing this with us. ❤
You are so welcome!
❤ the pendants. Beautiful.
Thank you!
So stunning. Love the effects.
Thanks so much 😊
Absolutely beautiful ❤️
Beautiful
Thank you
Great tutorial! I have that mold too so I’m definitely going to try making these, Thanks for sharing 😊
Thanks Christa! You’ll have to share your outcome with me!
I love your pendant
Absolutely Gorgeous!!!!
It's stunning...I will try and find out it I can create the same effect.
Thank you! Have fun with it!
Beautiful ❤❤❤
Thank you! 😊
These are great! Thank you for sharing!
Glad you like them! Thanks so much!
That’s really clever - thanks 😊👍🏴
You’re welcome 😊
Absolutely beautiful! Love it❤
Thank you so much!
I so love this.. They are beautiful. I'm definitely gonna try it out
Thank you so much found it really interesting take care
Glad you enjoyed it Thank you
These are awesome! Thank you so much for sharing this!
Glad you like them! You’re welcome!
So pretty!!
Wonderful 🌹
Many thanks
Wow!! Can’t wait to make these!!! Thx!!! ❤❤❤
Hope you enjoy!
These are beautiful. Will betrying tomorrow ❤
Love this I have been trying all different techniques to get this result awesome Thank You so much
You are so welcome!
Those are Awesome!!!Great video. U explained everything perfectly! Can't wait to try to make some.
Thank you! Have fun with it!
beautiful job
Brilliant!😊😊
Beautiful!
Thank you!
Beautiful
Fabulous, really cool ❤❤❤
Thank you!
❤❤❤❤it!! Gorgeous!!
Thank you!!
Just found your channel. New subscriber ❤ gorgeous work!. Shared on my facebook.😊
Beautiful ❤
So pretty!
Thank you! 😊
Lovely!!!
Love the tutorial ❤
Stunning!!
Thank you! 😊
Wow , these are stunning ! Resin scares me . Ive tried some before and it never hardened properly. It also scares me because of the health precautions you need to take while working with it .
These are so pretty thanks
❤
Thank you! 😊
These are beautiful!!
Thank you! 😊
Love this x
❤❤❤amazzzzing
Thank you soooooooo much for sharing this. You are incredible! New stalker here! Lol
You are so welcome! Nice stalkers welcome! 😉
Oh my goodness, I absolutely love these. Thank you for sharing it with us.
You are so welcome!
Love this ❤❤❤
Thank you!
Wish me luck, I’m trying this tonight! I absolutely love these pendants!!
Thank you!! ❤
Thank you! I hope it worked out for you!
Thanks for the easy to follow tutorial. Excellent outcomes!
Glad you enjoyed it!
That is beautiful! I hope to get there this year; bucket list!
I was glued to the screen for 13:51 I enjoyed this video very much. You have a new sub. Can’t wait to see what else you have.❤
Awesome! Thank you!
Love this - I do the tumblers northern lights - now time to try these lol - I hope lol
I love! Thanks for sharing your knowledge and skill .
LOVELY
Que belleza lo voy a intentar ¡¡
I love these. Can't wait to experiment and try to make some😊
Thanks you! Have fun!
Awesome! Thank you for sharing this !!
Brilliant design!!!
Thank you very much!
SO BEAUTIFUL ❤❤❤❤
Beautifully done ❤
These are amazing! Thanks for sharing❤
Love this video! Thank you for making the tutorial!
You are so welcome!
So pretty! But I am kind of wondering why you showed a completely different finished piece at the end.
Hmmm. I didn’t. I was making a whole bunch all at once so maybe the one I put the hardware through wasn’t the exact one I was showing earlier but otherwise not sure why you think it’s all together different? 🤷🏻♀️ I rarely make these so did a bunch at once for this tutorial and that’s it. Anyway - the whole point is to show others how so…
@@bouncingoffthewallsresinart oh ok that makes sense, i just wondered if somehow that one you were working on didn't work out or something. thank you, they are so gorgeous!
Thank you!
11:41 sooooo gorgeuzzx
I'd like to do this but not with glow in the dsrk
Thank you! I love this! What do you use to make the stars?
I use white spray paint and just push down very lightly on the cap!
Love this pendant. Where could I find the mould that you used. I didn’t see it in your store front.
Thank you! Here is the link to the mold: a.co/d/9gAJ9RU
❤❤❤❤❤
I never heard of wooden sticks adding air…interesting
It's actually well known. After using them once, the wood is sealed and can't release any more microbubbles.
Do you have to use UV resin or can I use regular resin?