I've never sewed a day in my life, but I'm about to start a full Leather Car seat covers re-upholstery project on my older Ford Bronco.. and having watched as many of your videos as I can over the past little while, I cannot thank you enough for teaching some of your secrets and showing how these projects can be done with time, patience, care and attention. You're a master and I think you again for sharing your wisdom. (Now please wish me luck on my project.. haha)
@Cechaflo Thank you, I'm pretty excited to get it started and see how it turns out. Your videos are of an great assistance to help my confidence in it too. 👍
I like watching all your video's thanks for the time that you spent to make them, On this video you have the foot with the guide for topstitch can you tall me were can I get one just like the one you are using look like is in very good quality well made Thanks
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP www.amazon.com/Sewing-Spring-Industrial-Machines-Multiple/dp/B07GC8DMNX I hope it helps.
Beautiful work. Did you loosen the bobbin tension so the red thread pulled up through the seam? Your pedal control in order to sew slow is impressive. Do you have a smaller pulley on your clutch motor? No way I can sew that slow with a clutch motor. You are a true craftsman and artist!!! I love your videos!
Yes, the thin thread in the bobbin is slightly loose. The thick beige thread remains on top. The 120 needle also helps because it does not make too wide holes in leather. I have done two tricks to slow down the speed of the machine: ua-cam.com/video/50wKoaU5ugk/v-deo.html ua-cam.com/video/YDiyffeXleg/v-deo.html The best option is the use of a servo motor. I would get mine at any moment.
@@Cechaflo thanks for the video! I replaced my Consew CSM 1000 servo motor pulley with a 45 mm pulley and it sews very slow. However I’m sewing Sunbrella marine canvas on a 90 year old Singer 95-40. A Pfaff 1245, a Juki 1542 or a consew 206rb just isn’t in my budget. I’m looking for a Singer 111w155 or 156 to fix up and use. Your videos are the best and you’re craftsmanship is outstanding. If you were to sell courses on boat canvas, I’d sign up in a New York minute. Thank you Sir!!
The skiving machine is a Fortuna V 50 leather skiver made in Germany. ua-cam.com/video/QVyYC3-Zbug/v-deo.html The micrometer is a leather caliper used in the tanneries and for leather artisans to measure the thickness of leather material. www.yoycart.com/Product/23249568380/
I am located in Mexico and got a usdd one from a local shoemaker. Hopefully this information is useful: www.techsew.com/us/techsew-sk-4-leather-skiving-machine.html hudsoncutting.com/skiving-machines/ www.n-ccarpet.com/index.php?route=product/product&product_id=728 www.machinio.com/cat/leather-skiving-machine#results Amazon, Ebay, etc. are good sources to find used and new leather skiving machines.
Backstitch is very important at the beginning and at the end or our sewings. I overlooked some of them on this sample. ua-cam.com/video/49eAqhLQ0ac/v-deo.html
Congratulations on the beautiful work!! Could you talk about the presser foot? Which is using on the pfaff machine. I tried to buy it for myself but the product was diverted. When I was arriving in Brazil. Would you like to send a link for me to buy please . I am Naval Capoteiro and Upholsterer. Grateful. I'll translate here to make it easier for Mr.
The presser foot of the video is for a Durkopp&Adler 767-FA-373 The distance from the center sewing line to the row of stitches is 5 mm. There are left or right side guides. The one for this machine is left side guide. ua-cam.com/video/8AT5qDjwMsY/v-deo.html www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side- On internet (Amazon, Ebay, Aliexpress, etc.) you can fin this foot for sale. www.amazon.com/Right-Spring-Guide-Presser-Durkopp/dp/B07Z7Q1H5C?th=1 On this other video I show another presser foot for the Pfaff 1245-706- The guide is right. ua-cam.com/video/36arEyhfNeE/v-deo.html www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side-3MM/dp/B07QJ1R2R9?th=1 You personally have to look for the appropriate link
The 'Leather Silver Marking Pen' can be easily erased with "white gasoline" (mineral spirits/white spirits). Shoemakers use it a lot here in Mexico. I do not know the composition but its odor is like benzine. I did a demonstration in this other video. min 10:00 ua-cam.com/video/MZZu4nB0kJ8/v-deo.html
Should get a auto trimmer friend. catch up with the world. Not only auto lift and trims but does so much more. It will make a better and faster job. I've been sewing on machines for upholstery/canvas and owned a Juki 1510n-7 for 16 yrs now and will never never go back. Owned many machines over the 55 yrs of sewing.
Esos pies de presion con guía los venden por internet en Amazon, Ebay, AliExpress, etc. Los hay para diferentes marcas de máquina. ua-cam.com/video/8AT5qDjwMsY/v-deo.html Los torneros también lo pueden fabricar desde cero. www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP www.amazon.com/-/es/Gr367-6-prensatelas-borde-Durkopp-Adler/dp/B07QH96PS7 www.amazon.com/TOP-SEWING-Walking-DNU-1541-DNU-1541S-CONSEW206RB/dp/B07FNFS2F3
Unbelievable. Can I ask a question? I'm not entirely satisfied with what I'm using to mark on suede. Everythjing seems to leave residues behind and yoiu know how delicate and finnicky suede is when you so much as stare it the wrong way. What does a really top notch craftsman like you use? (For marking and for cleaning agent)
TBH, I have not done much work with suedes. I like to mark suede with waxed pencils. I like to do a fine line to make the cleaning off easier. I use a liquid called 'washer' here in Mexico. I am not 100% sure but it smells like 'benzine', a cleaning liquid used to clean watches and laundry places to clean stains on clothes. By being aware, suede materials are very delicate then I only trace marks as guides to cut with scissors or a sharpened x-acto. I hope it helps.
Tal como el título lo dice, esto es un trabajo artesanal, el cual creo que solamente se logra con años de práctica y dedicación. Una pregunta, cuál es el # de Walking foot que está usando para french stitch?
@@Cechaflo gracias. Pero creo que no me expliqué bien en mi pregunta, yo quería saber cuál es el número de la pieza que está usted usando en su máquina (Walking foot)
@@TheAdrian1971 Desconozco que número tienen. Simplemente compré el pié con guia para distancia de 5 mm de la guía al centro de uníon de oostura. Venden de varias medidas y vienen con guía izquierda o a la derecha, como uno lo solicite. En este caso fue una sola unidad para Durkopp&Adler 767 con guía a la izquierda. www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
In my workshop, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
It is a spring loaded center guide presser foot for a Durkopp&Adler 767 ua-cam.com/video/8AT5qDjwMsY/v-deo.html www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
As a longtime follower I still cannot thank you enough for all I have learned from you.
Impeccable. . ..! And in such a good taste...thank you so much !
I've never sewed a day in my life, but I'm about to start a full Leather Car seat covers re-upholstery project on my older Ford Bronco.. and having watched as many of your videos as I can over the past little while, I cannot thank you enough for teaching some of your secrets and showing how these projects can be done with time, patience, care and attention. You're a master and I think you again for sharing your wisdom. (Now please wish me luck on my project.. haha)
Good luck with your upholstery project!!!
@Cechaflo Thank you, I'm pretty excited to get it started and see how it turns out. Your videos are of an great assistance to help my confidence in it too. 👍
Thank you so much for taking the time to share your years of experience and craft with the world!
You always have something new, God willing, I am a fan of your videos, good luck to you
Dude that skill level is like the gold standard peace and blessings brother
A true master of his craft.
Awesome tutorial, thank you! Your skill is incredible. 😊
I love the background music. 😍😍
Thank you for sharing. Your channel is inspirational. Keep it up!!
I just revisited this video, this is a beautiful technique Maestro!
Всем здравствуйте. Спасибо за работу! Вы маэсто в кожаной мастерской!
Beautifull finish!!! Congrats and thank you
Such incredible skill !! 💞
Thank you, you are so generous.......
very creatively clever effect- thanks a lot!
very nice! I can only imagine the amount of time to do an interior using this technique
Cool idea!
Beautiful job!!!
excelente video maestro de maestros saludos desde piura perù
Felicidades, excelente trabajo👍
Beautiful 😍 work 💪
Just crazy talent.
Super!!!!!!!!!! Thank you!!!!! Merci!!!!! Спасибо!!!!!
I like watching all your video's thanks for the time that you spent to make them, On this video you have the foot with the guide for topstitch can you tall me were can I get one just like the one you are using look like is in very good quality well made Thanks
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP
www.amazon.com/Sewing-Spring-Industrial-Machines-Multiple/dp/B07GC8DMNX
I hope it helps.
Hello .good job thank so much🎉
Merci beaucoup (thanks a lot)
Cool thanks 👍 respect
Super 👍👍👌
Was there a reason the top tension on your seeing machine was so high as to pull the red bobbin through?
The reason is to pull the bobbin red thread upwards to get the visible 'red points'.
Спасибо за видео 👍👍👍
Очень понравилось видио.
Beautiful work. Did you loosen the bobbin tension so the red thread pulled up through the seam? Your pedal control in order to sew slow is impressive. Do you have a smaller pulley on your clutch motor? No way I can sew that slow with a clutch motor. You are a true craftsman and artist!!! I love your videos!
Yes, the thin thread in the bobbin is slightly loose. The thick beige thread remains on top. The 120 needle also helps because it does not make too wide holes in leather.
I have done two tricks to slow down the speed of the machine:
ua-cam.com/video/50wKoaU5ugk/v-deo.html
ua-cam.com/video/YDiyffeXleg/v-deo.html
The best option is the use of a servo motor. I would get mine at any moment.
@@Cechaflo thanks for the video! I replaced my Consew CSM 1000 servo motor pulley with a 45 mm pulley and it sews very slow. However I’m sewing Sunbrella marine canvas on a 90 year old Singer 95-40. A Pfaff 1245, a Juki 1542 or a consew 206rb just isn’t in my budget. I’m looking for a Singer 111w155 or 156 to fix up and use.
Your videos are the best and you’re craftsmanship is outstanding. If you were to sell courses on boat canvas, I’d sign up in a New York minute. Thank you Sir!!
What make/model is your sewing machine?
Durkopp&Adler 767-FA-373 triple transport sewing machine.
What is that skiiving machine and long arm micrometer?
The skiving machine is a Fortuna V 50 leather skiver made in Germany.
ua-cam.com/video/QVyYC3-Zbug/v-deo.html
The micrometer is a leather caliper used in the tanneries and for leather artisans to measure the thickness of leather material.
www.yoycart.com/Product/23249568380/
Where would I get this machine for skiving leather to thinner edges?
I am located in Mexico and got a usdd one from a local shoemaker.
Hopefully this information is useful:
www.techsew.com/us/techsew-sk-4-leather-skiving-machine.html
hudsoncutting.com/skiving-machines/
www.n-ccarpet.com/index.php?route=product/product&product_id=728
www.machinio.com/cat/leather-skiving-machine#results
Amazon, Ebay, etc. are good sources to find used and new leather skiving machines.
Ở đâu bán chân vịt này
www.amazon.com/Right-Spring-Guide-Presser-Durkopp/dp/B07Z7Q1H5C
Is there no need for back stitching to lock it in?
Backstitch is very important at the beginning and at the end or our sewings.
I overlooked some of them on this sample.
ua-cam.com/video/49eAqhLQ0ac/v-deo.html
Great video
How do I get the skiving machine to buy
Hopefully on this link:
www.n-ccarpet.com/index.php?route=product/product&path=8900_9100&product_id=578
Good
Congratulations on the beautiful work!! Could you talk about the presser foot? Which is using on the pfaff machine. I tried to buy it for myself but the product was diverted. When I was arriving in Brazil. Would you like to send a link for me to buy please . I am Naval Capoteiro and Upholsterer. Grateful. I'll translate here to make it easier for Mr.
The presser foot of the video is for a Durkopp&Adler 767-FA-373 The distance from the center sewing line to the row of stitches is 5 mm.
There are left or right side guides. The one for this machine is left side guide.
ua-cam.com/video/8AT5qDjwMsY/v-deo.html
www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side-
On internet (Amazon, Ebay, Aliexpress, etc.) you can fin this foot for sale.
www.amazon.com/Right-Spring-Guide-Presser-Durkopp/dp/B07Z7Q1H5C?th=1
On this other video I show another presser foot for the Pfaff 1245-706- The guide is right. ua-cam.com/video/36arEyhfNeE/v-deo.html
www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side-3MM/dp/B07QJ1R2R9?th=1
You personally have to look for the appropriate link
I don't understand how you removed the gray pencil mark
The 'Leather Silver Marking Pen' can be easily erased with "white gasoline" (mineral spirits/white spirits). Shoemakers use it a lot here in Mexico. I do not know the composition but its odor is like benzine. I did a demonstration in this other video. min 10:00
ua-cam.com/video/MZZu4nB0kJ8/v-deo.html
Should get a auto trimmer friend. catch up with the world. Not only auto lift and trims but does so much more. It will make a better and faster job. I've been sewing on machines for upholstery/canvas and owned a Juki 1510n-7 for 16 yrs now and will never never go back. Owned many machines over the 55 yrs of sewing.
Most of these videos are aimed to novices in this trade. They are not for professionals.
شكرا
Buenos días.
Que gran idea! Esos pies para la máquina dónde se consiguen? Muchas gracias
Esos pies de presion con guía los venden por internet
en Amazon, Ebay, AliExpress, etc. Los hay para diferentes marcas de máquina.
ua-cam.com/video/8AT5qDjwMsY/v-deo.html
Los torneros también lo pueden fabricar desde cero.
www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP
www.amazon.com/-/es/Gr367-6-prensatelas-borde-Durkopp-Adler/dp/B07QH96PS7
www.amazon.com/TOP-SEWING-Walking-DNU-1541-DNU-1541S-CONSEW206RB/dp/B07FNFS2F3
Unbelievable. Can I ask a question? I'm not entirely satisfied with what I'm using to mark on suede. Everythjing seems to leave residues behind and yoiu know how delicate and finnicky suede is when you so much as stare it the wrong way. What does a really top notch craftsman like you use? (For marking and for cleaning agent)
TBH, I have not done much work with suedes.
I like to mark suede with waxed pencils. I like to do a fine line to make the cleaning off easier. I use a liquid called 'washer' here in Mexico. I am not 100% sure but it smells like 'benzine', a cleaning liquid used to clean watches and laundry places to clean stains on clothes.
By being aware, suede materials are very delicate then I only trace marks as guides to cut with scissors or a sharpened x-acto.
I hope it helps.
Tal como el título lo dice, esto es un trabajo artesanal, el cual creo que solamente se logra con años de práctica y dedicación.
Una pregunta, cuál es el # de Walking foot que está usando para french stitch?
It is 5 mm from the line of stitches to center guiding edge.
@@Cechaflo gracias. Pero creo que no me expliqué bien en mi pregunta, yo quería saber cuál es el número de la pieza que está usted usando en su máquina (Walking foot)
@@TheAdrian1971 Desconozco que número tienen. Simplemente compré el pié con guia para distancia de 5 mm de la guía al centro de uníon de oostura. Venden de varias medidas y vienen con guía izquierda o a la derecha, como uno lo solicite. En este caso fue una sola unidad para Durkopp&Adler 767 con guía a la izquierda.
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
@@Cechaflo Gracias por su respuesta inmediata.
How easy you make it seem its almost a optical illusion
Ассалаумагалейкум! Названия машины можно, который шьют?
Durkopp&Adler 767-FA-373
Please tell me the model of your sewing machine Pfaff!
Pfaff 1245-706 Similar to Pfaff 545 H3 or 145 H4
Best
In my workshop, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
يا شباب عبدور على خلطة الباتكس حدى بيعرف كيف بيتحضر بل بيت
Amazing work like always! What would you call the tool you used to press the piping flat at 10:50 ?
It is a spring loaded center guide presser foot for a Durkopp&Adler 767
ua-cam.com/video/8AT5qDjwMsY/v-deo.html
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
I want to see your personal vehicle!
♥♥♥
Блин ты крут!!!
Please remove the background music, just the sound of you working is beautiful don't spoil it with music. You are good at what you do
🇹🇷🙋♂️👏👏👍❤️
Q vale un máquina de esss
Estas máquinas usadas en buen estado están alrededor de 1000 dólares aprox.
Quiero una costure media pulgada de ancho para costear a la par de costura pequeña más para adornar
Pk starlit khusa brand man funky nation speak on mouth .reply must be
Tu dhakosla kar ke dikha raha